- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
List of products by brand OEM - Strona 41
Loading...
Basket for three type D (R20) batteries. The item has two wires with the insulation removed in black and red.
Index: DNG-12468
Index: DNG-12468
Round aluminum servo horn - 20mm / 6mm
Aluminum servo horn with a diameter of 20 mm and the mounting hole 6 mm. It is circular in shape. Works with standard servos. The set also includes mounting screws.
Index: GRL-12538
Index: GRL-12538
Goldpin 2x20 straight raster 2.54mm
Male goldpin strip with 2 x 20 pins. Raster is 2.54 mm in length and 2.54 mm in width - between the two strips. It works with Raspberry Pi Zero among others.
Index: DNG-12659
Index: DNG-12659
Power supply MDIN100W24 for DIN rail - 24V / 4A / 100W
Switch-over power supply designed for mounting on a DIN rail. The input voltage of the power supply is from 100 V to 240 V AC. The output voltage is 24 V. The output current is...
Index: WAK-15796
Index: WAK-15796
Index: LED-00457
Mini Tamiya connector - set (plug socket)
Power connector, type mini Tamiya - kit includes slot and plug.
Index: KAB-01075
Index: KAB-01075
Temperature sensor DS18B20+ module - blue
Module with digital thermometer DS18B20+, equipped with 1-wire interface. The measuring range is from -55 °C to 125 °C, the supply voltage is 3.0 V to 5.5 V
Index: MOD-01506
Index: MOD-01506
Ethernet network module ENC28J60 mini
A module that enables the connection of the microcontrollers and development kits , including the Arduino, with the Ethernet network via the SPI interface. The system in...
Index: MOD-01512
Index: MOD-01512
Index: LED-01456
The keyboard has numbers from 0 to 9 and the signs: * and #. The buttons are connected into a matrix so for the detection of 12 buttons, you need only 7 pins of the...
Index: SPF-02202
Index: SPF-02202
Ramps 1.4 RepRap driver for 3D printer
Popular driver of 3D printer, adapted to work with Arduino Mega 2560 and stepper motors driver A4988. The system requires a power source with an output voltage of 12 V and...
Index: MOD-02193
Index: MOD-02193
Module with button, type tact switch, size of 17 x 10mm with two holes with a diameter of 2.3 mm.
Index: MOD-02645
Index: MOD-02645
Stepper motor driver A4988 RepRap - red
Stepper motor controller based on A4988. Powered from 8 - 35 V, with a maximum current consumption of 1 A per coil. Maximum resolution: 1/16 steps.
Index: MOD-02660
Index: MOD-02660
MicroUSB B - A cable with switch - 1,5m
USB (typ A) - microUSB (B type) cablewith a switch. Connector can be used to power the Raspberry Pi minicomputer with the possibility of cutting off the power without needing...
Index: KAB-02648
Index: KAB-02648
Magnetometer GY-271 3-axis digital I2C 3,3V / 5V - QMC5883L
Sensor to measure the magnetic field in three axes in the range of ±8 gauss with a resolution of 5 miles gaus. It works with the voltage from 3.3 V to 5.0 V. It is...
Index: MOD-02722
Index: MOD-02722
Thumb Joystick with a button - module with a plate
The module is equipped with a joystick similar to analog devices used for example in PlayStation 2 controllers. It has the possibility of detecting movement in two directions...
Index: MOD-02901
Index: MOD-02901
Extension GPIO Raspberry Pi 3/2/B+ to the contact plate + tape
The module allows connection of the GPIO leads of the minicomputer Raspberry Pi 3, 2 and B + to popular breadboards with 830 and 400 holes, using an attached to the set,...
Index: RPI-02892
Index: RPI-02892
Passive buzzer module without generator - black
Module with buzzer without a generator, allows you to generate audio signals with a signal voltage of a certain frequency. Board in black.
Index: MOD-02963
Index: MOD-02963
Stepper motor driver A4988 RepRap - green
Stepper motor driver based on the A4988 system. Voltage supply in the range from 8V to 35 V, with maximum current consumption of 1 A per coil. Maximum resolution: 1/16 of a...
Index: MOD-02964
Index: MOD-02964
Temperature and humidity sensor DHT11 - blue module
Module with temperature and humidity sensor with a digital interface. Measuring range: temperature 0-50 °C, humidity of 20-90 %RH. It has connectors for connecting the sensor...
Index: MOD-03030
Index: MOD-03030
Tensometric beam NA27 1kg (10N)
Strain-gauge beam operating in the range of up to 1 kg (approx. 10 N). The smallest version is used, for example, in kitchen scales, portable scales. The connecting cable has...
Index: SES-03097
Index: SES-03097
L298N - two-channel motor controller - 12V/2A
Module with dual-channel driver for DC motors L298. It is supplied with the voltage up to 12 V. Maximum current per channel is 2 A. The system has embedded voltage regulator 5...
Index: MOD-03164
Index: MOD-03164
Big Push Button 10cm - green (eko2 version)
Big button with an outer diameter equal to 10 cm. Eko2 buttons can rattle when shaking but they perfectly perform their function.
Index: SWT-03653
Index: SWT-03653
Power module for breadboard XD-42 - 3,3V 5V
Power module for breadboards, allows for connection of power supply 5 V or 3.3 V using the AC adapter. Features LED indicator, signaling the power-up.
Index: MOD-03682
Index: MOD-03682