Filament Fiberlogy Impact PLA 1,75mm 0,85kg - Olive Green
Index: FLA-24998
- New
- Reduced price
- Promotion
Filament Fiberlogy Nylon PA12 1,75mm 0,75kg - Light Green
Index: FLA-25004
- New
- Reduced price
- Promotion
- Reduced price
- Promotion
Filament Rosa3D Refill PLA Multicolour 1,75mm 1kg - Silk Frozen
Index: ROS-22260
- Reduced price
- Promotion
- Reduced price
- Promotion
Filament Fiberlogy Nylon PA12 1,75mm 0,75kg - Light Green
Index: FLA-25004
- New
- Reduced price
- Promotion
ON-OFF switch monostable - PBW-16BPD - 2A 250V - flat green point
Index: AKS-10817
- Reduced price
- Promotion
- On sale!
- Promotion
List of products by brand OEM - Strona 43
Loading...
Cable IDC 40 pin female-female 60 cm Raspberry Pi 4B/3B+/3B/2B
60 cm long female cable terminated with 40-pin IDC raster 2.54 mm (goldpin standard) connectors, matching Raspberry Pi 4B / 3B+ / 3B / 2B.
Index: KAB-02925
Index: KAB-02925
RGB LED strip WS2813 - digital, addressed - IP65 60LED/m, 18W/m, 5V - 5m
Individually addressed RGB LEDs placed on a 5 m panel with a density of 60 LEDs per meter. Each pixel can emit a color from 24-bit palette.
Index: LED-08734
Index: LED-08734
Female socket extended 1x10 raster 2,54mm for Arduino - 5pcs
10-pin female connector strip, allows you to extend the Arduino connectors. Raster: 2.54 mm. Pirce for 5 pcs of connectors.
Index: SPF-01750
Index: SPF-01750
Electromagnet holding 12V 10W 70kgf
Powered by 12 V , the holding electromagnet holds a mass of 70 kg under standard acceleration due to gravity (9.8 m/s 2 ). Current consumption during operation is...
Index: DNG-17580
Index: DNG-17580
Female socket 2x10, 2,54mm raster
Female, double row goldpin socket, 2.54mm pitch .
Index: KAB-05871
Index: KAB-05871
Electromagnet holding 12V 15W 240kgf
Holding electromagnet with a maximum load capacity of 240 kg (at standard gravitational acceleration of 9.8 m/s 2 ). Powered by 12 V. Current consumption is approximately...
Index: DNG-17583
Index: DNG-17583
Phototransistor SFH-313FA 5mm 870nm - 5 pcs
Phototransistor in the case of 5 mm. Maximum sensitivity for the wave with the length of 870 nm. Darkened lens. 5 pcs.
Index: UCC-04245
Index: UCC-04245
Cable with 2x2 pin plug, 2,54mm - 40cm raster - 5pcs.
Cable 40 cm long with 2 pin female connectors - raster 2.54 mm.
Index: KAB-02919
Index: KAB-02919
Electric liquid pump 130l/h 12V
Electric pump for liquids in black. It has a 1.6 m long cable and a DC socket 5.5 x 2.1 mm. The pump dimensions are small: 35 x 35 x 35 mm. It is designed for pumping out water...
Index: DNG-14875
Index: DNG-14875
Liquid flow sensor YF-S402 6l / min - 1/8" thread
Sensor of liquid flow operating in the range from 0.3 to 6 liters per minute. Is supplied with the voltage from 3,5 V to 24 V, the output signal is a frequency proportional to...
Index: SEE-04410
Index: SEE-04410
Socket for SD memory card with SD238 ejector
Connector - socket for SD memory card with ejector.
Index: PAS-01113
Index: PAS-01113
Heat shrink tube 10.0/5.0 red - 10pcs
Diameter before heat shrink: 10 mm, diameter after heat shrink: 5 mm. Price for 10 x 1 meter.
Index: NSZ-04256
Index: NSZ-04256
Soldering stand with tin holder ZD-10S
Universal stand for soldering iron suitable for most resistance soldering irons. It has a tin holder and a place for the sponge (included).
Index: LUT-02268
Index: LUT-02268
Nozzle cleaning needle 0,15mm - 5 pcs
A needle to remove any residual print material accumulated in the 3D printer nozzles. The use of needles allows to ensure proper movement of the filament. The product is...
Index: DNG-17415
Index: DNG-17415
Single-row strap, female 10 pin. Pitch : 2 mm. Connector allows you to connect the XBee modules.
Index: UCC-01668
Index: UCC-01668
DC socket 5.5 x 2.1 mm with 1m 20AWG wire
DC φ5.5 x 2.1 mm slot (for power adapter) with two-vein cable with the length of 1 m with the removed insulation at the end. The thickness of the cable is 0.81 mm.
Index: DNG-13748
Index: DNG-13748
Index: LED-00221
TCST1103 photoelectric sensor - optocoupler
Slit width: 3 mm. Maximum voltage - 70 Volts .
Index: UCC-00372
Index: UCC-00372
Linear voltage regulator LDO 5V LM1117T-5.0 - THT TO220
Low-Dropout linear stabilizer. Output voltage: 5 V. Maximum output current: 1.5 A. TO220 housing.
Index: UCC-00791
Index: UCC-00791
Pulling electromagnet 12V 0,5kg
A device whose task is to perform linear motion - pulling, after giving a 12 V voltage signal. The electromagnet draws about 0.6 A current. The range of the pin is 5 mm....
Index: DNG-17757
Index: DNG-17757
Capacitor electrolytic 2200uF/25V 13x21mm - 100pcs
The ectrolytic through hole capacitor of 2200 µF / 25 V. Pins' pitch: 3.5 mm. Size: Ø13 x 21 mm. Price is for 100 pieces.
Index: PAS-08148
Index: PAS-08148
Ceramic condenser 330pF/50V THT - 10pcs
Through hole ceramic capacitor of 330 PF / 50 V. Price for 10 pieces.
Index: PAS-03589
Index: PAS-03589
Adhesive velcro 70x30 mm 5 packs
Five pieces of self-adhesive velcro, 70 x 30 mm, useful for fixing batteries, receivers, regulators, etc. to robots or RC models.
Index: AKC-00643
Index: AKC-00643
Assembly bar female 2-pin, raster 3,5mm
Seperable terminal block, female, 2-pin. Pitch of 3.5 mm. Height is 11.3 mm. Screw on the flat screwdriver (-).
Index: KAB-07094
Index: KAB-07094