Filament Fiberlogy Impact PLA 1,75mm 0,85kg - Army Green
Index: FLA-24996
- New
- Reduced price
- Promotion
Filament Fiberlogy Easy PLA 1,75mm 0,85kg - Light green
Index: FLA-25221
- New
- Reduced price
- Promotion
Jolly Dev - ATmega328PB with WiFi - ESP8285H16 - for Arduino Uno
Index: JOL-22564
- On sale!
- Promotion
- Reduced price
- Promotion
Motor driver expansion board X-NUCLEO-IHM08M1 for STM32 Nucleo
Index: FAR-15166
- Reduced price
- Promotion
Monostable ON-OFF switch - PBW-16BPD - 2A 250V - flat red point
Index: AKS-10816
- Reduced price
- Promotion
List of products by brand OEM - Strona 60
Loading...
Index: DNG-10158
M2,5 PH Screws Length 6mm with Washers - 10pcs.
Set contains 10 pieces of the cross screws with the M2. 5 thread with the length of 6 mm, and 10 washers.
Index: NSZ-00762
Index: NSZ-00762
A set of gears in various sizes and shapes containing 61 pieces.
Index: ZEB-06176
Index: ZEB-06176
Test kit, THT electronic components tester - BTE-056
Kit for testing and recognition of electronic components such as PNP, NPN bipolar transistors, MOSFET transistors with P and N channels and diodes. Built-in screen allows to...
Index: MOD-06282
Index: MOD-06282
Electrolytic capacitor 470 uF/16V 8x12mm 105C THT - 10pcs.
Through hole electrolytic capacitor of 470 uF / 16 V. Pins' pitch: 3.8 mm. Size: Ø8 x 12 mm. Price is for 10 pieces.
Index: PAS-04384
Index: PAS-04384
Hi-Link Power Supply HLK-PM03 100V-240VAC / 3.3VDC - 1A
The HLK-PM03 power supply from Hi-Link converts mains voltage (AC) from 100 V to 240 V into 3.3 V direct current (DC) with a current capacity of 1 A. It is ideal for powering...
Index: DNG-10928
Index: DNG-10928
Electrolytic capacitor 100uF/16V 6x7mm 105C THT - 10pcs.
Electrolytic capacitor with 100 uF / 16 V capacity and 2.54 mm grid. Size: Ø 6 x 7 mm. Price for 10 pieces.
Index: AKS-16925
Index: AKS-16925
Clip for 9V battery (6F22) with alligator clips
A connector that makes it easy to connect popular 9V (6F22) batteries with crocodile-terminated leads.
Index: AKC-04823
Index: AKC-04823
ON-OFF bistable switch - PBW-12APW - 2A / 250V - flat red + resistor
A flat bistable switch with red backlight. Contact load is 2 A for 250 V. Set also includes a resistor.
Index: AKS-10800
Index: AKS-10800
Set of miniature drill bits 10pcs. - from 0,6 to 2,3mm
The set includes 10 drill bits - from 0.6 to 2.3 mm. All drills are 45,5 mm long and have a 2,33 mm diameter chuck.
Index: NSZ-01576
Index: NSZ-01576
Banana plug with AL2311A socket - black - 5 pcs
Banana plug in black color with the length of 61mm with the hole diameter of 4 mm and with extra socket for another connector. 5 pcs.
Index: KAB-01829
Index: KAB-01829
BLS connector - socket 8x1 - 5pcs.
Socket for BLS type cable, 2.54 mm pitch. The set includes 5 8x1 sockets.
Index: KAB-04179
Index: KAB-04179
Power supply wire with JST - BEC plug
Double silicone cable ended with a plug of type "BEC", is used to connect power from the rechargeable batteries and batteries.
Index: KAB-01442
Index: KAB-01442
Tip for soldering station - series Black type 900M T-1,6D HQ
Tip for soldering station series Black T-1.6D, it works, among others, with stations: 936, 937, 803, 968, 995 etc.
Index: LUT-03371
Index: LUT-03371
Socket 1x12pin - 2,54mm - long - 5pcs.
Straight goldpin socket equipped with a single row of 12 pins in the pitch of 2.54 mm. Long pins were positioned vertically.
Index: UCC-08510
Index: UCC-08510
Liquid flow sensor YF-S201 30l/m - thread 1/2''
Sensor of liquid flow operating in the range from 1 to 30 liters per minute. Is supplied with the voltage from 3,5 V to 24 V, the output signal is a frequency proportional to...
Index: SES-08896
Index: SES-08896
Battery holder for 3 packs AAA (R3)
Basket for three AAA batteries (small fingers).
Index: AKC-01650
Index: AKC-01650
Tact Switch 12x12mm with cap - square green - 5pcs
Button size 12 x 12 mm, nozzle height: 5.7 mm, nozzle diameter: 12 mm, color of the nozzle: green. Price is for 5 pieces.
Index: SWT-11140
Index: SWT-11140
Connector for network cables RJ45/8P8C - beige - 5pcs
Connector for a quick connection of network cables RJ45 / 8P8C. It allows, in a simple way to increase the length of the cable. It has gilded contacts that ensure a high...
Index: KAB-05853
Index: KAB-05853
Module NE555 - regulated frequency generator
The module works as a timer, pulse generator or oscillator application. It can be used as a time delay. Works with voltages from 5 V to 12 V. Board size: 30 x 13 mm.
Index: MOD-08589
Index: MOD-08589
2,54 mm - angular plug 3-pin - 5pcs.
The 3-pin angular plug for printing, the pitch is 2.54 mm. The set includes 5 x 3-pin plugs.
Index: KAB-06790
Index: KAB-06790
BLS connector - 6x1 socket - 5pcs.
The socket for the BLS cable, pitch of 2.54 mm. The set includes 5 slots of 6x1.
Index: KAB-04261
Index: KAB-04261
1.0/8mm insulated end ferrule - 10pcs
Sleeve end for multiwire copper cables. Maximum vein's cross-section is 1.0 mm2, sleeve length is 8 mm. Price is for 10 pieces.
Index: KAB-05832
Index: KAB-05832
USB type A - female THT - 5pcs.
Female socket compatible with standard USB, type A in the THT case.
Index: KAB-01329
Index: KAB-01329