- New
Filament Fiberlogy Impact PLA 1,75mm 0,85kg - Olive Green
Index: FLA-24998
- New
- Reduced price
- Promotion
24V Step-Up/Step-Down Voltage Regulator S18V20F24 - Pololu 2582
Index: PLL-14070
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
- On sale!
- Promotion
List of products by brand OEM - Strona 61
Loading...
Toggle switch ON-OFF-ON KN3 (C) -103 250V / 6A
Printable lever switch equipped with 3 contacts with load capacity of 6 A / 250 V or 10 A / 125 V. It has 3 stable positions in ON-OFF-ON configuration. Leads raster is 12,5...
Index: NSZ-08823
Index: NSZ-08823
IR receiver CHQ1838. It is operating at a frequency of 38 kHz.
Index: GRL-12528
Index: GRL-12528
Side cutters 110 mm long . The side cutters are sent in different colors. The handle of the product is coated with non-slip rubber.
Index: PRO-11377
Index: PRO-11377
Electrolytic capacitor Low ESR 10uF/50V 5x11mm 105C THT - 10pcs
The ectrolytic through hole capacitor of low impedance (LOW ESR) 10 uF / 50 V. Pins' pitch: 2 mm. Size Ø5 x 11 mm. Price is for 10 pieces.
Index: PAS-01224
Index: PAS-01224
Diode Schottky BAT85 PHI 0,2A / 30V 4NS - 10pcs
Schottky diodes with a maximum current of 200 mA, 30 V backward voltage.
Index: AKS-14582
Index: AKS-14582
5in1 set - 5x desoldering wick + dispenser
Wick for removing tin excess. A width of 1.5 mm, and a length of 1.5 meters. In the kit there is a dispenser facilitating the use of the wick, as well as 4 spare wicks.
Index: NSZ-07692
Index: NSZ-07692
2,54 mm - socket housing 5-pin - 5pcs.
The 5-pin socket's case for the cable, the pitch is 2.54 mm. The kit includes 5 x 5-pin cases.
Index: KAB-06781
Index: KAB-06781
Radio module RFM75-S 2.4GHz - SMD transceiver
Wireless radio transmitter operating in the 2.4 GHz frequency with the SPI communication interface. It is powered by a 1.9 V to 3.6 V, surface soldered. Built-in PCB antenna,...
Index: UCC-05842
Index: UCC-05842
- Reduced price
- Promotion
DC 2,1/5,5mm cable 30cm with switch
Cable terminated with a 2.1/5.5 mm plug and socket with a built-in switch. It allows you to disconnect the power supply without removing the power supply from the mains...
Index: KAB-03913
Index: KAB-03913
Relay MPA-S-112-A - 12V coil, 1x 10A / 250VAC contacts
Coil voltage: 12 V, contacts: 10 A / 250 VAC. Dimensions: 18,7 x 15 mm, height: 15.2 mm.
Index: PRO-11587
Index: PRO-11587
Multiple optocoupler LTV847 - THT - 5pcs.
4-channel optocoupler, replacement for PC847. Transistor output. Maximum voltage 35 V. Housing: DIL16.
Index: UCC-00390
Index: UCC-00390
WiFi module ESP-12S ESP8266 Black - 9 GPIO, ADC, PCB antenna
Wi-fi module based on the ESP8266 chip. It works in standard wi-fi 802.11 b/g/n at 2.4 GHz. It is equipped with 16 pins - pitch of 2 mm, 9 of which is GPIO, 1 ADC and UART....
Index: DNG-10704
Index: DNG-10704
Index: KAB-01387
Limit switch with lever - WK611 - 5pcs.
Limit switch with lever with the length of 25 mm. Maximum operating parameters: voltage of 250 V and current of 5 A.
Index: AKS-10824
Index: AKS-10824
Speaker MG15 0.1W 8Ohm - 15x4mm
A speaker with a power of 0.1 W, 8 Ω, dimensions 15 x 4 mm.
Index: EAK-03467
Index: EAK-03467
Case for Raspberry Pi Zero V1.3 - open - transparent
Transparent case for Raspberry Pi Zero minicomputer with external dimensions of 65 x 3 4 x 15 mm . In the set is also a heatsink with thermocnductive tape.
Index: DNG-11854
Index: DNG-11854
Tact Switch 12x12, 7mm THT 6pin - green backlight - 5pcs.
A small monostable button mounted in a through-hole way - THT with six pins with the size: 12x12 mm, height: 7 mm. The button is with the backlight in the green color.
Index: SWT-04786
Index: SWT-04786
Tact Switch 10x10mm with cap - square red- 5pcs
Size: 12 x 12 mm, square nozzle: 10 x 10 mm, color of the nozzle: red. Price is for 5 pieces.
Index: SWT-11134
Index: SWT-11134
Index: UCC-00094
A bipolar stepper motor, four wired. It has a resolution of 200 steps per revolution (1.8 degree). It is powered by a voltage of 12.0 V, consumes a current of 400 mA per coil....
Index: MOT-06424
Index: MOT-06424
Strain relief boots for RJ45 8P8C wire - yellow - 10pcs
Rubber strain relief boots for plugs RJ45 (8P8C), in yellow. Price for 10 pieces.
Index: KAB-06669
Index: KAB-06669
Breadboard is used for creating and testing electronic circuits in color green.
Index: AKS-10287
Index: AKS-10287
Breadboard is used for creating and testing electronic circuits in color white.
Index: PLY-00605
Index: PLY-00605
USB extension cable A - A with On/Off switch black - 0.5 m
The USB A - A 2.0 cable is black , 0.5 m long and serves as an extension cable for powering devices and data transmission between them. It has a USB A plug on one side and a...
Index: DNG-16186
Index: DNG-16186