Description: Filament Fiberlogy PP 1.75 mm 0.75 kg - Light Green
Apolypropylenefilament, produced by Fiberlogy.This type of printing material is characterized by high flexibility andresistance to chemicals.PP is used in the medical and automotive industries. The weight of the filament wound on a spool is0.75 kg. The product is vacuum packed and protected against moisture.
In our offer of filaments you will also find other materials and colors.
FilamentFiberlogy PP 1.75 mm 0.75 kg - Light Green.
Properties of the PP Fiberlogy PP filament
- Models made of polypropylene may come into contact with food
- It is non-toxic, does not emit an unpleasant smell during printing
- It shows a high degree of bondability of the layers
- Resistant to chemicals
Printing instructions
- Filament does not require printing in a closed working chamber
- For a better adhesion of the filament to the table it is recommended to use polypropylene tape
- The optimum printing speed for PP filament is 35 mm/sec.
- Recommended retraction: from 2 mm to 3 mm
- Manufacturer's recommended supply air settings: up to 25%
- The manufacturer recommends setting the raft
Suggested print parameters for filament
| Print temperature: | from 220°C to 250°C |
| Table temperature: | up to 80°C |
| Cooling of the printout (airing): | up to 25% |
| Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally. |
PP filament specification
| Parameter | Scope |
|---|---|
| Diameter of the filament: | 1.75 mm |
| The dimensional tolerance of the philanthropy: | +/- 0.02 mm |
| The color: | light green |
| Print temperature: | from 220°C to 250°C |
| Table temperature: | up to 80°C |
| Material: | polypropylene (PP) |
| Reel diameter: | 200 mm |
| Reel width: | 80 mm |
| Mounting hole diameter: | 52 mm |
| Moisture absorber: | Yes |
| Vacuum packing: | Yes |
| Roughness: | +/- 0.01 mm |
| Package dimensions: | 205 x 205 x 90 mm |
| Net weight: | 0,75 kg |
PP filament properties graph.
|
Prints made ofpolypropylene are recycled. Unnecessary elements can be separated with other waste and reused. |
Useful links |
