Description: Filament Fiberlogy PP 1.75 mm 0.75 kg - Gray
Polypropylenefilamentingrey, produced by Fiberlogy.Models made of PP are characterized by a high level of flexibility. They can also have contact with food. Polypropylene is often used in packaging production. The0.75 kgfilament is wound on a plastic spool and protected against moisture.
In our offer of filaments you will also find other materials and colors.
FilamentFiberlogy PP 1.75 mm 0.75 kg - Gray.
Properties of the PP Fiberlogy PP filament
- Resistant to mechanical damage
- It shows high resistance to chemicals
- It is characterized by a high degree of bonding of layers
- The objects printed from it may come into contact with food
- During printing, the filament does not emit an irritating smell
- It's non-toxic
Printing instructions
- In order to ensure better adhesion of the printout to the table it is recommended to usepolypropylene tape
- The manufacturer recommends setting the raft
- During operation, the supply air should be set to below 25%.
- For the best possible print quality, the optimum speed should be about 35 mm/sec.
- Recommended retraction settings: 2mm to 3 mm
- Filament does not require a closed printer working chamber
Suggested print parameters for filament
| Print temperature: | from 220°C to 250°C |
| Table temperature: | up to80°C |
| Cooling of the printout (airing): | up to 25% |
| Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally. |
PP filament specification
| Parameter | Scope |
|---|---|
| Diameter of the filament: | 1.75 mm |
| The dimensional tolerance of the philanthropy: | +/- 0.02 mm |
| The color: | Grey |
| Print temperature: | from 220°C to 250°C |
| Table temperature: | up to 80°C |
| Material: | polypropylene (PP) |
| Reel diameter: | 200 mm |
| Reel width: | 80 mm |
| Mounting hole diameter: | 52 mm |
| Moisture absorber: | Yes |
| Vacuum packing: | Yes |
| Roughness: | +/- 0.01 mm |
| Package dimensions: | 205 x 205 x 90 mm |
| Net weight: | 0,75 kg |
PP filament properties graph.
|
Prints made ofpolypropylene are recycled. Unnecessary elements can be separated with other waste and reused. |
Filaments are hygroscopic, meaning they absorb moisture. Therefore, breaking the airtight vacuum packaging permanently reduces the quality and value of the product. For this reason, if an unpacked item is returned, the refund amount will be proportionally reduced. This does not apply to returns resulting from manufacturing defects in the material, such as damaged or cut filament. Please carefully check the color and material type on the label before opening the foil packaging.
Useful links |
