- New
- Reduced price
- Sale
- New
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
RPi Zero GPIO extensions and HAT - Strona 4
Loading...
Grove ADS1115 - 4-channel 16-bit ADC for Raspberry Pi - Seeedstudio 103030279
Grove 4-channel 16-bit ADS1115 ADC is an analog-digital converter (ADC) in the form of shield for GPIO connectors of Raspberry Pi. It is 4-channel ADC based on the ADS1115...
Index: SEE-13814
Index: SEE-13814
Pan-Tilt HAT for Raspberry Pi - Waveshare 16138
Dedicated to the Raspberry Pi , Pan-Tilt with a camera basket. The module is equipped with an I2C communication interface and a built-in system responsible for PWM motion...
Index: WSR-14430
Index: WSR-14430
DC Motor Driver HAT V1.0 - 2-channels motor driver 12V/1,2A - HAT for Raspberry Pi - DFRobot DFR0592
Two-channel DC motor controller TB6612FNG operating with voltage from 7 V to 12 V and continuous current 1.2 A per channel and momentary 2 A. The module in the form of an...
Index: DFR-15298
Index: DFR-15298
THT prototype board - Raspberry Pi 4B/3B+/3B/2B
The board allows you to create electronic circuits yourself. It is connected directly to the GPIO outputs of the Raspberry Pi mini-computer version 4B/3B+/3B/2B.
Index: MOD-02816
Index: MOD-02816
Servo Bonnet - 16-channel PWM I2C driver for Raspberry Pi - Adafruit 3416
Overlay for Raspberry Pi to control 16 servos . The chip generates PWM signals up to 1.6 kHz with 12-bit precision. The board is designed to fit Raspberry Pi 2 x 20...
Index: ADA-11419
Index: ADA-11419
Maker pHAT - GPIO extension for Raspberry Pi
PHAT shield for Raspberry Pi, it has signed GPIO pins to facilitate the recognition of individual pins, three programmable buttons, status LEDs for GPIO ports and active buzzer.
Index: CTN-13451
Index: CTN-13451
Li-Ion Battery HAT for Raspberry Pi - Waveshare 15141
Panel based on the system SW6106, enables powerring the Raspberry Pi using the rechargeable Li-Ion battery 14500, which makes the device portable. The device can also be used...
Index: WSR-13459
Index: WSR-13459
Stepper Motor HAT - 2 channels - 28V/2,5A for Raspberry Pi - Waveshare 15669
Shield for Rasberry Pi is equipped with a system DRV8825, it allows you to control two stepper motors with a resolution of steps of up to 1/32. It works with motors with a...
Index: WSR-13513
Index: WSR-13513
Extension GPIO Raspberry 4B/3B+/3B/2B/B+ to the contact plate + tape + breadboard
This module allows to connect GPIO pins of Raspberry Pi 4B, 3B+, 3B, 2B and B+ versions to the PCB using 40 wires tape. The kit includes GPIO extension module, contact board...
Index: OST-14314
Index: OST-14314
Dual Gigabit Ethernet Carrier Board for Raspberry Pi Compute Module 4 - Seeedstudio 102110497
Dual Gigabit Ethernet module is an expansion board with 2 Ethernet up to 1000 Mbit/s , 2 USB 3.0 ports and a number of peripherals such as CSI, DSI, microHDMI , FPC connector...
Index: SEE-19296
Index: SEE-19296
THT Prototype Board - Raspberry Pi
Board allows for independent creation of electronic circuits. Connected directly to the GPIO pins of the Raspberry Pi minicomputer.
Index: MOD-01742
Index: MOD-01742
Mini Kit 16-channel PWM I2C driver - Servo Hat for Raspberry Pi - Adafruit 2327
Shield for Raspberry Pi to control 16 servos. The system generates the PWM signal with frequency up to 1.6 kHz with 12 bit precision. Board is suitable for connectors of the...
Index: ADA-03283
Index: ADA-03283
Si5351A - 160MHz I2C signal generator - Adafruit 2045
The chip features a 25 MHz precision oscillator and PLL loops, which can generate signals from 8 kHz to 160 MHz. The chip works with voltages up to 3 V to 5.0 V, the Vpp value...
Index: ADA-04174
Index: ADA-04174
Logic level transmitter TXB0104 bi-directional, 4-channel - SparkFun BOB-11771
The module allows to exchange the data between systems that use the most popular voltage levels: from 1.2 V to 3.6 V for VCCA inputs, and from 1.65 V to 5.5 V for VCCB inputs....
Index: SPF-04290
Index: SPF-04290
Grove - GrovePi+ v3.0 Shield for RaspberryPi 4/3/2/B/B+/A+
Shield for Raspberry Pi is equipped with a w15 4-pin connectors for connecting sensors from the Grove minicomputer series. It cooperates with more than a hundred modules.
Index: SEE-04451
Index: SEE-04451
Proto Board for Raspberry Pi Zero
Board allows independent creation of electronic circuits. Connected directly to the GPIO pins of the Raspberry Pi minicomputer in a version Zero.
Index: MSX-05794
Index: MSX-05794
PiUART - USB - USB-UART converter for Raspberry Pi - Adafruit 3589
Miniature shield for Raspberry Pi which is also a converter of USB-UART. Connected directly to GPIO pins. The module also has a power switch. It is compatible with Raspberry Pi...
Index: ADA-09816
Index: ADA-09816
Automation Hat 3x relay + LED - Raspberry Pi extension
The module is working with a Raspberry Pi, it is mounted on the GPIO connectors, designed for home automation. It has 3 relays of 24 V / 2 A, 15 LED indicators, analogue...
Index: PIM-10636
Index: PIM-10636
Dual channel CAN BUS Shield for Raspberry Pi - Seeedstudio 103990563
Seeedstudio shield for Raspberry Pi minicomputers. Supports CAN FD interface with transmission speed up to 8 Mb/s , it is a faster and more efficient version of the...
Index: SEE-17684
Index: SEE-17684
Automation HAT Mini - HAT for Raspberry Pi - Pimoroni PIM487
Automation HAT Mini is an overlay designed for Raspberry Pi minicomputers. The small size of the overlay gives great possibilities in automation . It is equipped with 24 V / 2...
Index: PIM-19070
Index: PIM-19070
Raspberry Pi Zero 2W to 3B Adapter - Waveshare 22383
Using the Waveshare adapter, it is possible to mount the Raspberry Pi Zero 2 W on a Raspberry Pi 3B -shaped board. The Raspberry Pi Zero 2 W board is attached to the adapter...
Index: WSR-21701
Index: WSR-21701
DRV8835 - two-channel 11V / 1,2A engine controller - overlay for Raspberry Pi - Pololu 2753
Module with two-channel circuit DRV8835 operating with voltages from 2 V to 11 V and current up to 1.2 A per channel (max. 1.5 A). It can be connected directly to the GPIO...
Index: PLL-02678
Index: PLL-02678
Case for HiFiBerry and Raspberry Pi Model 3/2/B + universal black
Black case for Raspberry Pi minicomputer in version B3, B2 and B+, as well as the shield from the HiFiBerry Digi+, DAC+ and Amp+ with external dimensions of 98 x 67 x 45...
Index: RHF-05156
Index: RHF-05156
ADS1115 16-Bit ADC - 4 Channel with Programmable Gain Amplifier STEMMA QT/Qwiic- Adafruit 1085
Module with analog to digital converter with 16-bit precision. Running at a speed of up to 860 samples per second. It has the ability to change the amplification of up to 16 x....
Index: ADA-08444
Index: ADA-08444