- New
- Reduced price
- Promotion
- Reduced price
- Promotion
Numato Lab - 4-channel relay module 12V 7A/250VAC + 6GPIO - USB
Index: MOD-08600
- Reduced price
- Promotion
- On sale!
- Promotion
Raspberry Pi accessories - Strona 32
Loading...
CS Mount lens 25mm - manual focus - for Raspberry Pi HQ camera - ArduCam LN041
Lens for Raspberry PI HQ camera with manual focus. The focal length of the lens is 25 mm. The viewing angle is 14Β°.
Index: ACM-17061
Index: ACM-17061
M12 lens with adapter for Raspberry Pi HQ camera - 25mm telephoto - ArduCam LN036
Telephoto lens for Raspberry Pi HQ camera with 25 mm focal length. The mounting type is M12, the set includes adapter for CS-Mount. The viewing angle is 20Β°.
Index: ACM-17067
Index: ACM-17067
Raspberry Pi 4 aluminum case with fan - Argon ONE M.2 - grey
Aluminum housing ONE M.2 for Raspberry Pi 4B. It is equipped with two HDMI ports, heat sinks and a fan that provides maximum cooling and is programmable. It allows to connect...
Index: ARG-17273
Index: ARG-17273
M40160M12 M12 mount lens 1,6mm - for ArduCam cameras - ArduCam LN018
Lens for cameras with M12 mounting. M40160M12 has 1.6 mm focal length and 1/4" format. The viewing angle for 1/4" format is 118Β° using the camera for Raspberry Pi with...
Index: ACM-17457
Index: ACM-17457
PiJuice Zero - A Portable Power Platform for Raspberry Pi Zero
Portable power platform for Raspberry Pi Zero minicomputers. When connected to any power source, it acts as a wireless UPS . It uses intelligent power management...
Index: SUP-17486
Index: SUP-17486
Housing-heat sink Alloy Heatsink for Raspberry Pi 4B - aluminum - black
An aluminium case for the Raspberry Pi 4B which acts as a heat sink . The 66 x 56 x 9 mm black case allows the minicomputer to cool effectively during operation. The kit...
Index: DNG-18127
Index: DNG-18127
Case-heat sink + fan - Alloy Heatsink for Raspberry Pi 4B - aluminum - black
Cover for Raspberry Pi 4B in a form of heat sink . It has a built-in fan to improve cooling of the module. The 66 x 56 x 9mm black case allows the minicomputer to cool...
Index: DNG-18128
Index: DNG-18128
M27280M07S M12 Low Distortion Lens - For ArduCam Cameras - Arducam LN013
M27280M07S low distortion lens manufactured by ArduCam. It is compatible with cameras for Arduino and Raspberry Pi. Its focal length is 2.8 mm and its optical format is...
Index: ACM-18603
Index: ACM-18603
Fan 5V 50x50x10mm 2 wires - JST 2pin 2,54mm connector
Brushless fan powered by 5V, has been manufactured from plastic. Two 28cm long cables ended with a 2.54mm JST connector are responsible for the power supply. The rotational...
Index: DNG-18682
Index: DNG-18682
Case for Raspberry Pi 4B - with cutouts - aluminum - graphite
Graphite colour case for Raspberry Pi 4B. Made of durable aluminum , protects your Raspberry from mechanical damage. Equipped with holes for access to all ports of the...
Index: DNG-18743
Index: DNG-18743
Pimoroni - Audio Dac Shim - audio line-out I2S
Audio Dac Shim overlay designed for Raspberry Pi. Based on PCM5100A DAC chip, which takes high quality digital audio from Raspberry Pi and outputs clear 24-bit / 192 kHz...
Index: PIM-18912
Index: PIM-18912
1.28 '' round display from Waveshare. The screen resolution is 240 x 240 px . It presents a clear, properly contrasted and saturated image that is displayed in the RGB...
Index: WSR-19040
Index: WSR-19040
Unicorn HAT Mini - LED RGB matrix - for Raspberry Pi - Pimoroni PIM498
Overlay for Raspberry Pi made by Pimoroni company. On the board there are 119 RGB LEDs in the form of 17 x 7 matrix . Thanks to the HT16D35A chip it is possible to...
Index: PIM-19068
Index: PIM-19068
M40180H10 lens M12 mount 1,8mm for Arducam cameras - Arducam LN006
The lens M40180H10 is dedicated for Arducam cameras. Mounted using M12 connector, its focal length is 1.8 mm , aperture 2.4 , and format is 1/4". The viewing angle when used...
Index: ACM-19353
Index: ACM-19353
- EOL
GNSS/GPS/BDS/QZSS L76B module for Raspberry Pi Pico - Waveshare 20072
Waveshare GNSS module to enable multiple GPS satellite systems using Raspberry Pi Pico module. The overlay for RPi Pico is based on L76B chip and supports satellite systems...
Index: WSR-20109
Index: WSR-20109
Kit consisting of two boards with adapter - for camera and Raspberry Pi. CSI to HDMI adapter was designed by ArduCam company. It was created to extend the connection...
Index: ACM-20259
Index: ACM-20259
- EOL
Environmental sensor - hat for Raspberry Pi - Waveshare 20471
An environmental sensor in the form of an overlay for Raspberry Pi equipped with a number of useful sensors. It has built-in temperature , humidity , air pressure, ambient...
Index: WSR-20550
Index: WSR-20550
Adapter for Raspberry Pi Zero Camera - 38mm
An adapter to connect dedicated cameras to Raspberry Pi, such as Raspberry Pi V2 camera to Raspberry Pi Zero / Zero W / Zero 2 W minicomputer. The small length of the tape,...
Index: PIH-20641
Index: PIH-20641
Display HAT Mini - HAT with IPS LCD 2'' 320x240px for Raspberry Pi - PiMoroni PIM589
The Display HAT Mini from Pimoroni is a display overlay designed for any 40-pin version of the Raspberry Pi. The bright, 18-bit , 2" IPS display with a resolution of 320 x...
Index: PIM-20895
Index: PIM-20895
Lens CS-Mount 8mm - manual focus - for HQ Raspberry Pi camera - ArduCam LN039
Lens for Raspberry Pi camera in HQ version and V1 / V2 camera. It allows you to manually control the sharpness of the image , thanks to which it enables precise adjustment of...
Index: ACM-21096
Index: ACM-21096
Sony IMX519 16 Mpx camera - with autofocus - for Raspberry Pi and Nvidia Jetson Nano - ArduCam B0371
ArduCam camera equipped with Sony IMX519 sensor with 16 Mpx sensor. The module has an autofocus lens and features a high image resolution of 4656 x 3496 px. The sharpening...
Index: ACM-21104
Index: ACM-21104
Case for Raspberry Pi Zero x2 - Mini Cluster - open - PiHut TPH-067
Transparent case compatible with two minicomputers Raspberry Pi Zero W / WH / V1.3 / 2 W , designed for self-assembly. It comes with four rubber feet . The housing is open so...
Index: PIH-21312
Index: PIH-21312
USB-LAN module for Raspberry Pi Zero - Argon POD
The USB-LAN module is a device compatible with the Raspberry Pi Zero 2 W and the Argon POD series of modules. It allows you to extend the Raspberry Pi minicomputer with...
Index: ARG-21436
Index: ARG-21436
The Motoron M3H256 from Pololu is a three-channel driver for DC motors in the form of an overlay for Raspberry Pi minicomputers, version B + and newer. The supply voltage of...
Index: PLL-21621
Index: PLL-21621
