ELECTRONICS - Strona 157
Loading...
Heatsink 40x30x5mm for Raspberry Pi 4 with thermoconductive tape - blue
The 40 x 30 x 5 mm radiator is fully compatible with the Raspberry Pi 4 minicomputer as well as other electronic circuits. It has a layer of self-adhesive and double-sided...
Index: ODS-15696
Index: ODS-15696
Seeed Xiao RA4M1 - ARM Cortex M4 - Seeedstudio 102010551
Xiao RA4M1 is a compact development board with a 32-bit Renesas RA4M1 microcontroller (ARM Cortex M4, 48 MHz). It offers 256 KB Flash memory, 32 KB SRAM, 8 KB EEPROM . It...
Index: SEE-25608
Index: SEE-25608
Barrier strip for PCBs, 4-pin, 8.5mm raster - 5pcs.
Barrier strip for PCB, 4-pin with 8,5 mm pitch, maximum voltage for contacts is 300 V and current is 20 A.
Index: AKS-10956
Index: AKS-10956
- Discontinued product
Filament Spectrum PLA Pro 1,75mm 1kg - Deep Black
Filament made of PLA-Pro used as cartridge for 3D-printers and printing pens. The diameter is 1.75 mm. The set includes 1kg of filament in the color Deep Black.
Index: SPC-11470
Index: SPC-11470
- Discontinued product
Bridge rectifier KBU10M - 1000 V / 10A - flat -5 pieces
Flat bridge rectifier, maximum working voltage 1000 V, current to 10 A. It has outputs in the form of wires. Price for 5 pieces.
Index: PAS-13710
Index: PAS-13710
- Discontinued product
Temperature sensor and humidity ZigBee ZTH1 Thuja Smart Life
Small size ZigBee ZTH1 humidity temperature sensor, available in white . It is powered by one 3 V CR2450 battery (supplied). It works with ZigBee 3.0. It measures...
Index: REM-16236
Index: REM-16236
The 32GB microSD card is the perfect choice for Raspberry Pi users. Equipped with the Raspberry Pi OS , it is ready to go right out of the box. The set also includes a...
Index: RPI-25740
Index: RPI-25740
Slide switch SS22T20 2-position - 5pcs.
Slide switch, straight, to print with the size of 9 x 3.5 x 3.5 mm. Pins pitch: 2.54 mm.
Index: UCC-05273
Index: UCC-05273
- Discontinued product
Lanberg Ethernet Patchcord UTP 5e 2m - black
Cable - twisted pair from the 5e Ethernet category in black colour with installed RJ45 plugs with the length of 2 meters.
Index: KAB-12852
Index: KAB-12852
Case for Raspberry Pi 5 with two fans - aluminium - black
A black casing made of aluminum intended for the Raspberry Pi 5 minicomputer, serving as an effective heat sink . It has two fans that additionally support the air flow...
Index: DNG-24511
Index: DNG-24511
- Discontinued product
Index: UCC-00095
- Discontinued product
DC 5,5/2,1mm socket adapter - USB A socket
The adapter is ended, on the one side with the DC 5,5 / 2,1 mm socket, on the other with the USB type-A.
Index: KAB-02092
Index: KAB-02092
- Discontinued product
- SPECIAL OFFERS
Bluetooth 4.0 module with USB 2.0 connector, which can be connected to a computer with Windows XP, Vista, 7, 8, 10 or Mac OS operating system. Works within a range of up to...
Index: DFR-03561
Index: DFR-03561
Grove - heart rate sensor with a clip on the ear
Set for monitoring the heart rate, contains an ear clip with a wire and receiver module. The results can be displayed on the monitor through a serial port. The supply voltage...
Index: SEE-04409
Index: SEE-04409
Eight-segment display x1 - 14mm green - 8 mcd - common cathode
Single 8-segment display which displays digits with a dot and some characters.
Index: LCD-07306
Index: LCD-07306
OLED display 1.27'' 128 x 96 px - SPI - 262k RGB colors - Waveshare 24691
The color OLED display from Waveshare is a device that works perfectly with platforms such as Arduino or Raspberry Pi . The built-in SSD1351 driver is responsible...
Index: WSR-23572
Index: WSR-23572
LCD display 2x16 blue characters
Symbol: JHD162A B-W. Driver compatible with HD44780 . Blue negative. Backlight: white LEDs. Character color: white.
Index: LCD-00224
Index: LCD-00224
- Discontinued product
DC 5,5/2,1mm socket adapter - DC 4,8/1,7mm plug
The adapter allows you to connect a power supply with DC 5,5 / 2,1 mm plug for modules with DC 4,8 / 1,7 mm slot. Cable length is 15 cm.
Index: KAB-01921
Index: KAB-01921
- Discontinued product
The holding electromagnet powered with the voltage of 6 V with a power of 2.5 W. It holds a weight of 2 kg in standard earth acceleration of 9.8 m/s2. Case diameter is 20 mm,...
Index: MOD-03096
Index: MOD-03096
- Discontinued product
Electrolytic capacitor 330uF/35V 10x12mm 105C THT - 10pcs.
Through hole electrolytic capacitor of 330 uF / 35 V. Pins' pitch: 5 mm. Size: Ø10 x 12 mm. Price is for 10 pieces.
Index: PAS-04120
Index: PAS-04120
- Discontinued product
The conductive membrane for measuring the pressure of the force - Adafruit 1361
The membrane is made of a conductive material. The pressure, at any point, changes the resistance, which leads to the measurable change of the voltage in a simple way. The...
Index: ADA-05014
Index: ADA-05014
Socket 1x4pin - 2,54mm - long - 5pcs.
4-pin connector, easy to solder onto the PCB. It is used, for example, for connecting the male wires. Pitch is equal to 2.54 mm. It features long pins with a length of 10.5 mm.
Index: UCC-08508
Index: UCC-08508
- Discontinued product
Liquid flow sensor FS300A 60l/min - thread 3/4''
A liquid flow sensor operating in the range of 1 to 60 liters per minute. It is powered by a voltage of 3.5 V to 24 V, and the output signal is a frequency proportional to the...
Index: SES-08895
Index: SES-08895
Temperature sensor DS18B20 - black module - Iduino SE042
Module with digital thermometer DS18B20+, equipped with 1-wire interface. The measuring range is from -55 °C to 125 °C, the supply voltage is 5 V.
Index: GRL-12512
Index: GRL-12512