- Sale
- Sale
- Reduced price
- Sale
ELECTRONICS - Strona 156
Loading...
Electrolytic capacitor 220uF/50V 10x12mm 105C THT - 10szt.
Through hole electrolytic capacitor of 220 uF / 25 V. Pins' pitch: 5 mm. Size: Ø10 x 12 mm. Price is for 10 pieces.
Index: PAS-04122
Index: PAS-04122
Filament Spectrum PLA Pro 1,75mm 1kg - Polar White
Filament made of PLA-Pro used as cartridge for 3D-printers and printing pens. The diameter is 1.75 mm. The set includes 1kg of filament in the color Polar White.
Index: SPC-11476
Index: SPC-11476
- Discontinued product
Dust / air quality sensor PM1.0 / PM2.5 / PM10 - 5V UART - PlanTower PMSA003-A
Dust sensor module that allows you to measure the degree of air purity. Enables precise analysis of the pollution in the environment, measures the concentration of PM1.0 /...
Index: PLA-17769
Index: PLA-17769
WiFi antenna with connector w.FL / MHF3 / IPEX3 - Adafruit 5445
Manufactured by Adafruit WiFi and Bluetooth antenna operating in the frequency band from 2400 MHz to 2700 MHz . On the one hand, it is terminated with an MHF3 / IPEX3...
Index: ADA-22477
Index: ADA-22477
DIP switch 5-pole - red - 5psc.
Slide switch, board with five levers. Leads Raster: 2.54 mm Housing height: 5.5 mm
Index: SWT-00371
Index: SWT-00371
- Discontinued product
Linear voltage regulator LDO 5V LM1117T-5.0 - THT TO220
Low-Dropout linear stabilizer. Output voltage: 5 V. Maximum output current: 1.5 A. TO220 housing.
Index: UCC-00791
Index: UCC-00791
DFRobot Gravity - analogue turbidity sensor
Sensor for testing the quality of water by measuring its turbidity. Operates at 5 volts at temperatures from -30°C to 80°C.
Index: DFR-05318
Index: DFR-05318
Mono 2.5W Class D Audio Amplifier - PAM8302 - Adafruit 2130
The module with class D audio amplifier. It is characterized by low power losses. It allows to connect a 4-8 ohm speaker of 2.5 W power. It has a built-in potentiometer for...
Index: ADA-06381
Index: ADA-06381
Diode Power LED Prolight Opto PM2B-3LVE-R7 3W - white warm
Power LED green 3 W in white warm color.
Index: PAS-08311
Index: PAS-08311
Filament Spectrum PLA Pro 1,75mm 1kg - Arctic White
Filament made of PLA-Pro used as cartridge for 3D-printers and printing pens. The diameter is 1.75 mm. The set includes 1kg of filament in the color Arctic White.
Index: SPC-11487
Index: SPC-11487
- Discontinued product
940nm infrared transmitter - Iduino ST1087
Module with IR transmitter, works with a voltage of 5 V.
Index: GRL-12509
Index: GRL-12509
Flashing signalising lamp commonly used in automatic gate. The device instantly attracts attention, providing a high level of security. Works like a strobe light.
Index: LED-13637
Index: LED-13637
Inveo RFID-USB-DESK (MIF) transponder reader - 13.56 MHz Mifare
The transponder reader designed for office work, supports Mifare standard tags . The device works after connecting to a USB computer. The reader works on the basis of CDC...
Index: INV-16389
Index: INV-16389
DRV8874 - single channel 37V/2.1A motor driver - Pololu 4035
Single-channel DC motor driver from Pololu equipped with the DRV8874 system. It is supplied with the voltage from 4.5 V to 37 V. The continuous current per channel is 2.1...
Index: PLL-21359
Index: PLL-21359
SparkFun Level Shifter is an 8-channel, bidirectional logic level translator equipped with the TXS0108E chip from Texas Instruments. It allows you to switch logic...
Index: SPF-21561
Index: SPF-21561
ESP32-S3-EYE - WiFi + Bluetooth module with 2Mpx camera and LCD 1,3'' display
ESP32-S3-EYE is a small AI development board made by Espressif . It is based on the ESP32-S3 and ESP-WHO system, thanks to which WiFi and Bluetooth 5 LE communication is...
Index: SOC-22120
Index: SOC-22120
DRV8825 - stepper motor driver 45V / 2,2A - Pololu 2133
Stepper motor's driver based on the system DRV8825, allows you to control the motor with a current consumption of up to 1.5 A (with cooling up to 2.2 A) per coil, when...
Index: PLL-01324
Index: PLL-01324
SHT31 - digital humidity and temperature sensor I2C - Adafruit 2857
Humidity and temperature sensor powered by the voltage from 3 V to 5.0 V with I2C interface. The measurement of temperature is from -40 °C to 125 °C, humidity from 0 to 100 % RH.
Index: ADA-05415
Index: ADA-05415
2,54 mm - angular plug 6-pin - 5pcs.
The 6-pin angular plug for printing, the pitch is 2.54 mm. The set includes 5 x 6-pin plugs.
Index: KAB-06788
Index: KAB-06788
- Discontinued product
Reed switch normally - plastic 14mm - 5pcs.
Reed contact in the plastic straight case with the length of 14 mm. The set contains 5 reed contacts.
Index: MOD-09466
Index: MOD-09466
Grove - module cover 1x2 blue - 4pcs.
Shield for the modules from Grove series in green color with size of 50 x 25 x 13 mm. It is also compatible with Lego and Makeblock. Allows you to mount two small or one large...
Index: SEE-13342
Index: SEE-13342
Cable HDMI 2.0 Lanberg 4K - 0,5m
The HDMI cable allows you to connect your multimedia devices together. It supports the 4 K UHD standard to ensure the highest quality of transmitted video and audio.
Index: IMP-14924
Index: IMP-14924
Electromagnet pushing 12V 0,2kg 11mm
The pushing solenoid is powered by 12 V and can push out a mass of 0.2 kg with a standard earth acceleration of 9.8 m/s2. The diameter of the housing is 11 mm, while the...
Index: AKS-19280
Index: AKS-19280
- Discontinued product
Adafruit QT Py ESP32-S3 2MB PSRAM - WiFi module with STEMMA QT/Qwiic - Adafruit 5700
A compact module from the Adafruit QT Py collection equipped with an efficient ESP32-S3 system with wireless WiFi and Bluetooth communication. It has a 240 MHz dual-core...
Index: ADA-23828
Index: ADA-23828