ELECTRONICS - Strona 158
Loading...
Liquid flow sensor FS300A 60l/min - thread 3/4''
A liquid flow sensor operating in the range of 1 to 60 liters per minute. It is powered by a voltage of 3.5 V to 24 V, and the output signal is a frequency proportional to the...
Index: SES-08895
Index: SES-08895
Temperature sensor DS18B20 - black module - Iduino SE042
Module with digital thermometer DS18B20+, equipped with 1-wire interface. The measuring range is from -55 °C to 125 °C, the supply voltage is 5 V.
Index: GRL-12512
Index: GRL-12512
ESP32-S2-DevKitC-1-N8R2 - WiFi - development board with ESP32-S2-SOLO-2
ESP32-S2-DevKitC-1-N8R2 development board, based on the ESP32-S2-SOLO-2 system. Enables wireless WiFi communication in the 2.4 GHz band. It has 8 MB of Flash memory, 2 MB...
Index: SOC-24049
Index: SOC-24049
- Discontinued product
Infrared receiver TSOP32156 - 56 kHz
IR receiver TSOP32156, it is operating at a frequency of 56 kHz.
Index: SES-00781
Index: SES-00781
NeoPixel Jewel - ring LED RGB 7xWS2812 5050 - Adafruit 2226
The ring consists of 7 individually addressed RGB LEDs WS2812 5050 with integrated control unit and with holes. Module needs one microcontroller output. Outer circle diameter...
Index: ADA-02945
Index: ADA-02945
SM12F11G7 2-position slide switch - 10pcs.
Slide switch, straight to print with dimensions 23 x 14 x 7.4 mm. Lead spacing 4.20 mm.
Index: UCC-06157
Index: UCC-06157
- Discontinued product
Switch On-Off IRS-101-8C/D 12VDC/20A with lightning - green
Switch, type on-off with the built-in backlight. The load capacity of the contacts is 12 V / 20 A.
Index: KAB-06685
Index: KAB-06685
E-paper E-Ink (B) 1.54'' 200x200px - module with three-color SPI display - Waveshare 13338
Module with 1.54" e-paper display with a resolution of 200 x 200 pixels. Communicates via the SPI interface, e.g. with Arduino or Raspberry Pi. Displays 3 colors: black, white...
Index: WSR-09657
Index: WSR-09657
Rocker switch, triple RS203-6C3R - 250V / 16A - red
Rocker switch, triple, type of On-Off with backlight. It is e quipped with the 9 contacts with the load capacity of 250 V / 16 A. Pins pitch is 11 mm. The size of the switch...
Index: AKS-12064
Index: AKS-12064
- Discontinued product
QwiicBus EndPoint - SparkFun COM-16988
QwiicBus system component, allowing to extend the range of the I2C communication bus. It uses NXP PCA9615 chip, which converts two default I2C signals (SDA data line and SCL...
Index: SPF-19394
Index: SPF-19394
Marten, mouse and rat repellent - ultrasonic - IP65 - Viano OD-12
The Viano OD-12 is an effective marten repeller as well as an electric repeller for mice , rats and weasels . The OD-12 model has an IP65 housing, which makes it highly...
Index: VIA-21399
Index: VIA-21399
Electrolytic capacitor 220uF/50V 10x12mm 105C THT - 10szt.
Through hole electrolytic capacitor of 220 uF / 25 V. Pins' pitch: 5 mm. Size: Ø10 x 12 mm. Price is for 10 pieces.
Index: PAS-04122
Index: PAS-04122
- Discontinued product
- SPECIAL OFFERS
E-paper E-Ink 1.54'' V2.1 200x200px - display module SPI - Waveshare 12955
Module with e-paper 1.54 " display with resolution of 200 x 200 px. It communicates via the SPI interface e.g. with Arduino or Raspberry Pi.
Index: WSR-09098
Index: WSR-09098
Filament Spectrum PLA Pro 1,75mm 1kg - Polar White
Filament made of PLA-Pro used as cartridge for 3D-printers and printing pens. The diameter is 1.75 mm. The set includes 1kg of filament in the color Polar White.
Index: SPC-11476
Index: SPC-11476
- Discontinued product
Touchscreen display Waveshare capacitive 7" for the Raspberry Pi with a resolution of 1024 x 600 px. It works with Raspberry Pi in versions 4B, 3B+ 3B+ 2B, 1B+, 1B, 1A and...
Index: WSR-11935
Index: WSR-11935
Air quality / dust sensor PM1.0 / PM2.5 / PM10 - PMS3003 - 5 V UART
Dust sensor allows monitoring the air quality, measures the PM1.0, PM2,5, PM10 coefficients. Equipped with a sensor that could detect particles with diameter more than...
Index: DNG-13442
Index: DNG-13442
WiFi antenna with connector w.FL / MHF3 / IPEX3 - Adafruit 5445
Manufactured by Adafruit WiFi and Bluetooth antenna operating in the frequency band from 2400 MHz to 2700 MHz . On the one hand, it is terminated with an MHF3 / IPEX3...
Index: ADA-22477
Index: ADA-22477
2MPx IMX291 Low Light Wide Angle camera for Raspberry Pi - USB 2.0/UVC - ArduCam B0200
The ArduCam B0200 camera with a Sony IMX291 1/2.8'' image sensor with a resolution of 2 MPx is a compact module compatible with Raspberry Pi that provides excellent image...
Index: ACM-24423
Index: ACM-24423
QTR-1A reflectance sensor - 2pcs. - Pololu 2458
Two modules with QTR reflective sensors. They have an analog output. The supply voltage is 5 V.
Index: PLL-01842
Index: PLL-01842
Cable IDC 40 pin female-female 40 cm Raspberry Pi 4B/3B+/3B/2B
40 cm long female cable terminated with 40-pin IDC raster 2.54 mm (goldpin standard) connectors, matching Raspberry Pi 4B / 3B+ / 3B / 2B.
Index: KAB-02924
Index: KAB-02924
Filament Spectrum PLA Pro 1,75mm 1kg - Arctic White
Filament made of PLA-Pro used as cartridge for 3D-printers and printing pens. The diameter is 1.75 mm. The set includes 1kg of filament in the color Arctic White.
Index: SPC-11487
Index: SPC-11487
- Discontinued product
65K RGB LCD IPS Display - 240x240px 1.54'' SPI - Waveshare 18079
IPS LCD display manufactured by Waveshare and equipped with ST7789 driver. The screen diagonal is 1.54'' and the resolution is 240 x 240 px . The module uses a 4-pin SPI...
Index: WSR-19366
Index: WSR-19366
ESP32-S3-EYE - WiFi + Bluetooth module with 2Mpx camera and LCD 1,3'' display
ESP32-S3-EYE is a small AI development board made by Espressif . It is based on the ESP32-S3 and ESP-WHO system, thanks to which WiFi and Bluetooth 5 LE communication is...
Index: SOC-22120
Index: SOC-22120
- Discontinued product
SPI FLASH Breakout - Flash memory module W25Q64 - 64 Mb / 8 MB - Adafruit 5636
SPI FLASH Breakout from Adafruit is a module with Flash memory W25Q64 with a capacity of 64 Mb / 8 MB . The module uses the SPI interface to communicate with connected...
Index: ADA-22382
Index: ADA-22382