USB-UART converters are integrated circuits that enable efficient and undisturbed communication. They are designed to exchange information, which is possible due to asymmetric transmission. Data is received through the serial port. Functioning of the USB-UART converters starts with a start bit, which has the form of logical zero. In subsequent stages 7,8 and 9 bits are transferred. However, the number of bits depends on the configuration of the device. The information ends with the stop bit, which is always the only logical one. The whole information is called a UART frame.
Filament Rosa3D Flex 88A 1,75mm 0,5kg - Glow in the dark - Green
Index: ROS-23219
- Reduced price
- Promotion
- On sale!
- Promotion
Velleman VMP501 prototype KIT for Raspberry Pi 4B/3B+/3B/2B/Zero
Index: VEL-10722
- Reduced price
- Promotion
- On sale!
- Promotion
24V Step-Up/Step-Down Voltage Regulator S18V20F24 - Pololu 2582
Index: PLL-14070
- Reduced price
- Promotion
UART / RS232 / RS485 Converters
Loading...
USB adapter for female cables with USB-UART converter PL2303 - Waveshare 7965
The adapter allows you to connect a USB to many different modules, with built-in converter USB to UART PL2303. Completed with female wire connectors. The system is compatible...
Index: WSR-04470
Index: WSR-04470
USB-UART (TTL) converter - PL2303 - USB plug A - V2 version - Waveshare 20265
A communication module in the form of a converter that enables communication between USB and UART serial interfaces. It allows the exchange of data between the computer and...
Index: WSR-21639
Index: WSR-21639
USB-UART converter D-Sun PL2303
Converter which provides communication between the serial interfaces USB and UART. It allows to exchange data between the computer and the systems which use microcontrollers....
Index: MOD-04146
Index: MOD-04146
USB adapter for female cables with USB-UART PL2303 converter
The adapter allows you to connect the USB connector to many different modules using the built-in USB - UART PL2303 converter. The wires are terminated with female connectors....
Index: MOD-03727
Index: MOD-03727
RS485/RJ45 converter - Ethernet PoE - TCP/IP to serial port - Waveshare 20978
Converter enabling bidirectional communication between the RS485 and Ethernet interface. It offers support for PoE with power protection and signal isolation protection,...
Index: WSR-24478
Index: WSR-24478
USB-UART converter CP2102 - USB plug - Waveshare 11079
Converter which provides communication between the serial interface, USB and UART. It allows to exchange data between the computer and the systems which use microcontrollers....
Index: WSR-04924
Index: WSR-04924
Converter RS232 - UART with connector DB9 - SP3232 3.3V/5V - Waveshare 3965
Converter of serial interface RS232 to standard UART with 9-pin D-SUB connector. Control system is a popular SP3232. The module operates with a supply voltage range from 3.0 V...
Index: WSR-04475
Index: WSR-04475
Hub USB Hat - 4-port hub for Raspberry Pi 4B/3B+/3B/Zero - Waveshare 12694
Hat for the Raspberry Pi that adds 4 USB ports and a converter USB-UART. The device has dimensions of 65 x 30 mm, it works with Raspberry Pi 4B/3B+/3B and Zero and Zero W.
Index: WSR-08870
Index: WSR-08870
FT232H - USB converter for UART, SPI, I2C, GPIO - Adafruit 2264
Board allows you to communicate with the modules and sensors directly from the computer. It supports the most popular interfaces: UART, I2C, SPI, it also has some GPIO pins.
Index: ADA-03003
Index: ADA-03003
UART converter - RS485 5V - ARK/RJ11 - Waveshare 4738
Converter allows you to connect the microcontroller via the RS-485 bus which supports up to 32 devices on a line with length up to 1 km and a speed up to 10 Mbps. The module...
Index: WSR-04493
Index: WSR-04493
2-Channel RS485 - 2-channel UART-RS485 SP3485 module - for Raspberry Pi Pico - Waveshare 19717
A module manufactured by Waveshare as a 2 channel UART - RS485 communication converter . Dedicated for use with Raspberry Pi Pico, it has pinouts compatible with...
Index: WSR-20098
Index: WSR-20098
MAX485 transceiver RS485 - DIP - 5pcs.
A circuit used to convert RS-485 port voltage to TTL standard. The circuit is in DIP8 chrono housing.
Index: UCC-07693
Index: UCC-07693
CP2102 USB-UART TTL Converter - USB type C socket - Waveshare 20644
Converter allowing communication between USB and UART serial interfaces on TTL level. Equipped with CP2102 chip, it works with a voltage of 3.3 V or 5 V, which is...
Index: WSR-20538
Index: WSR-20538
USB Converter - RS232 COM - AK50 CH341
Adapter that allows you to connect devices with a RS232 connector to the computer through the USB connector. The module is based on a system of CH341. It is displayed in the...
Index: MOD-02218
Index: MOD-02218
SN65HVD230 CAN Board - Waveshare 3945
The module based on the SN65HVD230 allows connecting a microcontroller to the CAN bus. The chip is pinout compatible with the PCA82C250. The module is powered by 3,3 V and...
Index: WSR-06960
Index: WSR-06960
USB-UART TTL converter PL2303 - USB type C socket - Waveshare 20645
Converter allowing communication between USB and UART serial interfaces at TTL level. Equipped with PL2303 chip, visible in the operating system as a virtual COM port....
Index: WSR-20539
Index: WSR-20539
USB - RS232/RS485/UART(TTL) converter - FT232RL - Waveshare 15817
Converter enabling communication between the USB interface and RS232, RS485 or UART (TTL) . It is based on the FT232RL system, ensuring reliable and fast operation. Equipped...
Index: SEE-24125
Index: SEE-24125
Converter USB-RS485 - FTDI, FT232RL
Converter allows you to connect to a computer or microcontroller, the RS-485 bus which supports up to 32 devices on a line with length of up to 1 km, with a speed up to 10...
Index: MOD-02446
Index: MOD-02446
Converter USB-UART FTDI FT232RL - microUSB port - Waveshare 11324
Converter which provides communication between the serial interfaces USB and UART. It allows to exchange data between the computer and the systems which use microcontrollers....
Index: WSR-05341
Index: WSR-05341
RS232/RS485 converter - Ethernet - Cortex M4 - Waveshare 16530
A device allowing communication between RS232 or RS485 and Ethernet RJ45 interfaces. Module configurable via web page, AT commands, serial protocol and network protocol. It...
Index: WSR-15134
Index: WSR-15134
USB-UART TTL converter FT232 - USB type C socket - Waveshare 20646
This module is equipped with a converter that allows communication between USB and UART serial interfaces on TTL level. It has built-in FT232 chip and operates with...
Index: WSR-20540
Index: WSR-20540
Converter USB-UART CH343 - USB type A plug - Waveshare 21442
The converter is based on the CH343 chip . It enables communication between USB and UART interfaces. It is used to exchange data between a computer and a microcontroller. It...
Index: WSR-21713
Index: WSR-21713
FT232RL SP-880 - USB converter - RS232 COM +/-6V with DB9 connector - Adafruit 18
Adapter on 140 cm cable allows you to connect devices with RS232 connector to the computer through the USB connector. The module appears to the operating system as a virtual...
Index: ADA-04371
Index: ADA-04371
Converter USB-UART FTDI FT232RL - miniUSB socket - Waveshare 6646
Converter provides communication between the serial interfaces USB and UART. It allows to exchange data between the computer and the systems which use microcontrollers. The...
Index: WSR-04498
Index: WSR-04498
See also
USB UART converter - A wide range of reliable converters in Botland
Our store offers converters based on various modules , which are detected as a COM port in operating systems. In addition, you can find adapters that allow you to connect to a computer, among others. controller with RS232 port to a standard USB socket. Sets of this type include, among others: a cable with a USB type A and USB type B connector, as well as a CD with drivers. Converters of this type can operate with both 3.5 V and 5 V. The designs of the devices are based on proven and tested systems that guarantee stable operation even during intensive use. Our offer also includes shields for the Raspberry Pi minicomputer with built-in USB ports and a USB-UART converter. Selected overlays are equipped with communication diodes that inform the user not only about the port status, but also about the communication status. In addition to the device, the set includes the necessary cables, connector, mounting screws and spacers. In Botland you can find UART converters equipped with a mini-USB or micro-USB port. Devices of this type can be used, among others: with STM32 Discovery and Arduino. Moreover, we offer models that ensure very high data transfer speeds. Converters of this type have two 26-pin connectors, as well as interfaces such as 12C, JTAG, SPI and others.
RS232 to USB, RS485 and other converters - Advanced converters
Our store's assortment includes UART to RS485 converters , thanks to which you can manage up to several dozen devices. This type of devices are often equipped with ARK, RJ11 and goldpin connectors. Additionally, our offer includes converters enabling the exchange of information between the RS485 and RS232 interfaces and Ethernet RJ45 . Modules of this type can be configured, among others: via a website and via a network or serial protocol. Such converters enable operation in various modes, making them universal and versatile in use. Moreover, thanks to the use of an efficient processor, they are distinguished by fast and stable operation. In the case of models that support both the RS232 and RS485 interfaces, it is possible to support both standards in parallel. Another advantage is full Modbus support, including: for industrial applications. In many cases, the firmware is updated via the network.
UART communication - Long life and trouble-free operation
The Botland store's offer includes, among others: modern converters manufactured by reputable companies with many years of experience . Our devices are characterized by high quality workmanship and failure-free operation, even in the case of intensive use. By choosing our store, you can be sure that you will receive an original product without hidden defects, and in case of any problems, our experts will be happy to answer all your questions, including: with the use of a specific converter.
USB - UART / RS232 / RS485 converters - FAQ
( UART ) is a hardware device for asynchronous serial communication - an electronic integrated circuit. Data format and baud rate are configurable. UART sends data bits one by one, from least significant to most significant, so that the communication channel supports precise timing.
RS-232 is an interface for exchanging serial binary data between two devices. It is a standard protocol used for serial communication: it is used to connect a computer and its peripheral devices to enable serial data exchange.
RS-485 is usually an interface for industrial applications. The RS-485 standard allows long cabling distances in environments with high levels of electrical noise and can support multiple devices on the same bus without interference, which is extremely important when dealing with a large number of different devices.