Grove modules - Strona 8
SenseCAP S2110 Sensor Builder - Grove sensors to RS485 converter - Seeedstudio 114992986
SenseCAP S2110 Sensor Builder is an open source tool for creating RS485 sensors using Grove sensors. It also allows you to build a custom industrial-grade LoRaWAN sensor...Grove Starter Kit for Seeed Xiao - Seeedstudio 110010044
Grove Starter Kit for Seeed Xiao is a set of Grove modules with an overlay designed to work with the Seeed Xiao module. The manufacturer has also prepared a series of guides...Grove - Doppler Radar - BGT24LTR11 - 24GHz transceiver - 10m - Seeedstudio 109020021
Doppler radar based on BGT24LTR11 chip and XMC1302 controller with ARM Cortex-M0 processor. It allows for precise distance measurements and motion detection using radar...Grove - LED String Light - LED driver
Grove series module that allows you to control the LED strip included in the kit . The supply voltage is from 3.3 V to 5 V. Since the LEDs work with 12 V, the module is...- Reduced price
- Promotion
Grove - ORP Sensor Kit Pro - liquid quality test kit - ORP IP68 - Seeedstudio 110020370
The set is equipped with a Grove sensor that measures the ORP (HR-O) to detect the quality of the liquid by measuring the purity of the water and determining its ability to...FeatherWing - 6 port Grove + STEMMA QT expansion module for Feather boards - Adafruit 5862
FeatherWing from Adafruit is an expansion module for Feather boards , allowing you to connect up to 6 devices with a Grove connector . Equipped with 3 analog / digital...Grove - set of 5 female-female 4-pin 2mm Y-cables - 20cm - M5Stack A150
The Grove Y-cable kit of 5 allows you to connect two Grove modules to one M5Stack port simultaneously . The Y-splitter increases the versatility and expandability of your...- New
Arduino MKR Connector Carrier ASX00007 - shield for Arduino MKR
Module for Arduino from the MKR that extends the capabilities of I/O pins. It is designed for modules and sensors from the Grove series. It has 4-pin connectors, works with...Grove - a set of 5 wires 4-pin 2mm - female wires 2.54mm/30cm
A set of five 4-pin Grove female wires. They are used to connect Grove sensors with a board incompatible with the Grove raster 2.54 mm wires, such as Raspberry Pi. Length is...Grove - a set of 5 female-female 4-pin - 2mm/5cm cables with a latch
A set of five 4-pin wires Grove. They are used to connect Grove sensors with Base Shield Board v2. Wire length is 5 cm. Version with lock.Grove - capacitive humidity sensor - corrosion resistant
The device is used to measure the soil moisture by the capacitive detection. It has a built in voltage regulator which provides an operating voltage in the range from 3.3 V to...Grove - LoRa-E5 STM32WLE5JC - EU868/US915 - LoRaWAN radio module - Seeedstudio 113020091
LoRa-E5 radio module with Grove connector, manufactured by Seeedstudio. It features an STM32WLE5JC chip with a low-power 32-bit ARM Cortex M4 processor with a clock...Grove - a set of 5 female-female 4-pin - 2mm/20cm I2C splitters
A set of five 4-pin wires Grove. With them you can connect two I2C Grove modules to one connector of the I2C bus, for example on the Base Shield v2 board. Cables are compatible...Grove - air purity sensor MP503 v1.3
Air purity sensor from Groveseries. It is used for detecting slightly toxic gases such as carbon monoxide, alcohol, acetone, thinner, formaldehyde and other.Grove - BME280 - humidity, temperature and pressure sensor 110kPa I2C 3-5V
The Grove module is equipped with a humidity, temperature and pressure sensor powered with the voltage of 3.3 V to 5 V with I2C and SPI interface. Measuring range: temperature:...Grove ESP8285 V2 - WiFi UART module
Grove Wi-Fi module based on a ESP8285 system with built-in TCP/IP and support AT commands. It supports the most popular protection, such as WEP, WPA/WPA2, TKIP, AES and WAPI....Grove Creator Kit - Gamma - set of 40 Grove modules to Arduino
Set consisting of 40 modules and cables with Grove interface. It has been designed for creators of all ages, regardless of their level of sophistication and experience with...Gravity - I2C/UART connection cable set - PH2.0-female - 30cm - 5pcs - DFRobot FIT0916-F
The kit includes 5 pieces of 30 cm long connection cables from DFRobot. On one side they are terminated with a female PH2.0 connector compliant with the Gravity standard,...Grove - GrovePi+ v3.0 Shield for RaspberryPi 4/3/2/B/B+/A+
Shield for Raspberry Pi is equipped with a w15 4-pin connectors for connecting sensors from the Grove minicomputer series. It cooperates with more than a hundred modules.BitGadget Kit - Grove extension kit for micro:bit
BitGadget Kit including BitMaker cap, ultrasonic distance sensor, sound sensor, light sensor, potentiometer, button, analog servo, fan, RGB LED strip and 7 Grove cables....- EOL
Grove - 2-channels relay with optoisolation - 10A/250VAC - coil 5V + clear case
The module has two SRD-05 relays with the coil powered with the voltage of 5 V with optical insulation of input and mounting holes. The system allows you to control...Grove - SI1151 solar light sensor v2.0
The Grove module based on the SI1151. Multi-channel, digital light sensor to detect visible light and infrared light. It is working with voltage from 3 V to 5.5 V. It...See also
- Oxygen sensors
- Optical sensors
- Resistance sensors
- Door sensors
- Piezoelectric sensors
- RPM sensors
- Twilight sensors
- Tilt sensors
- Accelerometers
- Inductive sensors
- Hall effect sensors
- Alarm sensors
- 9DoF IMU sensors
- Pressure sensors
- Air quality sensors
- Sound sensors
- Gesture sensors
- Limit switches
- Sensors of light and color
- Gas sensors
- Magnetic sensors
- Medical sensors
- Pressure sensors
- Sensors odbiciowe
- Distance sensors
- Inductive contactless sensors
- Weather sensors
- Liquid level sensors
- Current sensors
- Flow sensors
- Motion sensors
- Temperature sensors
- PT100 temperature probes
- Humidity sensors
- Fingerprint readers
- Encoders
- Photoresistors
- Phototransistors
- IR receivers
- Magnetometers
- Gyros
- Sensor sets
- Gravity modules