- Reduced price
- Promotion
Minicomputer UP Squared V2 8GB RAM + 64GB eMMC Intel Pentium J6426
Index: AAE-24035
- Reduced price
- Promotion
Minicomputer UP 4000 4GB RAM + 32GB eMMC Intel Pentium N4200
Index: AAE-24031
- Reduced price
- Promotion
4-Channel Relay 13.2 Module V1.1 - STM32F030 - M5Stack M121-V11
Index: MSS-24051
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
Filament Rosa3D Refill PLA Magic Silk 1,75mm 1kg - Gold-Silver
Index: ROS-24206
- Reduced price
- Promotion
ROBOTS AND MECHANICS - Strona 12
Loading...
Stepper Motor JK35HY28-0504 200 steps 10V/0,5A/0,1Nm
Bipolar stepper motor, four wire. It has a resolution of 200 steps per revolution (1.8 degrees). It is powered by 10 V and draws 500 mA current per coil. The torque is 1 kg*cm...
Index: MOT-04850
Index: MOT-04850
The Grove module is used to atomize water. It works with a voltage of 5 V. It can be used, among other things, as a humidifier but also allows for more advanced projects where...
Index: SEE-11362
Index: SEE-11362
Aluminium Mounting Hub 8mm M3 - 2pcs. - Pololu 2693
Hub makes it easy to mount the wheel on the motor with the shaft of 8 mm using the M3 screws. The set has two pieces.
Index: PLL-09611
Index: PLL-09611
Stepper Motor SY35ST36-1004A 200 steps 2.7V 1.0A 0.14Nm - Pololu 1209
Bipolar stepper motor 200 steps (1.8 degrees) supplied with a voltage of 2.7V with a current consumption of 1000 mA per coil, the torque holding 1.4 kg * cm (0.14 Nm)...
Index: PLL-00758
Index: PLL-00758
37Dx54L Motor with 70:1 Gear 12V 150RPM - Pololu 4744
Polol' s engine with a 70:1 gearbox . Its torque is 27 kg*cm and its speed is 150 rpm. Powered by 12 V DC . Current consumption is approximately 200 mA during...
Index: PLL-17053
Index: PLL-17053
37Dx50L Motor with 10:1 Gear 24V 1000RPM - Pololu 4689
Polol electric motor with 10:1 gearbox. Powered by 24 V DC , its speed is 1000 rpm and torque is 5.5 kg*cm . It takes up to approx. 100 mA without load and up to 3000 mA...
Index: PLL-17535
Index: PLL-17535
DC Motor 37Dx73L with 100:1 Gear 12V 100RPM + encoder CPR 64 - Pololu 4755
Polol's 100:1 gearbox motor . 100 rpm and 34 kg*cm (3.33 Nm) torque . The motor is powered by 12 volts and has a current capacity of 200 mA without load and 5 .5A...
Index: PLL-16480
Index: PLL-16480
GT2 belt for building structures using traffic, one meter long. Thanks to its elasticity and tensile strength, this strap is an ideal choice when creating your own...
Index: VST-17336
Index: VST-17336
Small metal motor powered from 3 V to 6 V. Idle current 400 mA. Dimensions: 37,8 x 27,7 mm.
Index: MOT-04718
Index: MOT-04718
DFRobot Gravity - Propeller with DC 3-6V Motor Module
A small motor module with controller with speed control capability. The device is compatible with Arduino . A propeller and cable are also included.
Index: DFR-03559
Index: DFR-03559
Servo PowerHD HD-6001HB - standard
Standard servo with ball bearings. Supply voltage: 4,8 V - 6,0 V. Speed: 0.14 sec /60 °. Point: 6.7 kg (6 Volts). Dimensions: 40,7 x 20,5 x 39,5 mm. Weight: 43 gr.
Index: MOT-02311
Index: MOT-02311
Linear Actuator Super Power Jack 4000N 6mm/s 24V - 40cm stroke
Professional electric actuator with 24 V supply voltage. FDI series actuators are designed to work in harsh conditions, they are characterized by high quality of workmanship,...
Index: ELB-15868
Index: ELB-15868
Wheels 32x7mm - black - 2pcs - Pololu 1087
Set of the plastic wheels (2 PCs.) with rubber tyres providing a high adhesion. They are suitable for engines with Pololu gears.
Index: PLL-00012
Index: PLL-00012
NEMA 23 - Steel L-type Step Motor Mount
Steel bracket for stepper motor NEMA 17. It has slots and mounting holes. The kit does contain munting screws.
Index: NSZ-05407
Index: NSZ-05407
DFRobot DC 12V 160RPM motor with worm gear
Metal worm gear motor for strength and high torque of 2.2 kg*cm (0.21 Nm). Supply voltage is 12V and speed is 160 rpm.
Index: DFR-06939
Index: DFR-06939
Small metal vibrating motor powered by 3 V. Idle current 60 mA. Dimensions: 10 x 10 x 3,7 mm.
Index: MOT-04726
Index: MOT-04726
Chassis Rectangle 4WD 4-wheel robot chassis with DC Motor Drive
Transparent, universal platform that allows to build e.g. a line follower or a sumo robot. You can use any controller including Arduino with Motor Shield to control it.
Index: ROB-07289
Index: ROB-07289
M1,6 PH Screws Length: 3mm - 10pcs.
The screw with M1,6 thread with the length of 3 mm. It is made of stainless steel. Head diameter is 3,2 mm and its height is 1.42 mm. The set includes 10 pieces.
Index: NSZ-07448
Index: NSZ-07448
Stepper Motor JK57HS56-2504 200 steps 3,25V/2,5A/1,1Nm
Bipolar stepper motor , four-wire. Has a resolution of 200 steps per revolution (1.8 degrees). Powered by 3.25 V, draws 2500 mA per coil. Torque is 11.2 kg*cm (1.1 Nm)....
Index: MOT-03651
Index: MOT-03651
Stepper Motor JK42HW40-0406 200 steps 12V/0,4A/0,25Nm
Unipolar stepper motor , six-wire. Has a resolution of 200 steps per revolution (1.8 degrees). It is powered by 12.0 V, draws 400 mA per coil. Torque is 2.6 kg*cm (0.25 Nm)....
Index: MOT-03609
Index: MOT-03609
V-Wheel roller for V-Slot profiles. Rollers are an inseparable element of systems based on aluminium profiles and requiring movement. Included are the elements necessary...
Index: VST-17348
Index: VST-17348
Metal robot Chassis 4WD four-wheeled with DC motors - rectangular
Metal, universal platform, allowing you to build a robot, for example, to track a line (line follower) or fighting (sumo). For control, you can use any controller, including...
Index: ROB-09300
Index: ROB-09300
Grove - servo splitter - 20cm - 5pcs
A set of five Grove cables to connect e.g. Base Shield v2 to servers, actuators, sensors or devices with a Grove connector. Each one is 20 cm long and consists of a 4-pin Grove...
Index: SEE-14987
Index: SEE-14987
Linear Actuator LAD 500N 15mm/s 12V - 20cm stroke
Electric actuator with 50 kg (500 N) load capacity. It is designed for a 12-volt supply. The device operates at a speed of 15 mm/sec. Thanks to the use of metal gear modes it...
Index: ELB-15472
Index: ELB-15472