List of products by brand OEM - Strona 17
Nylon Distance Bolts 20mm with M3 Thread - 10pcs.
Distance made of plastic, with a length of 20 mm and M3 thread. Price is for 10 pieces. Elements of this type allow to keep a constant distance between the mounted boards.Electromagnet holding 12V 10W 70kgf
Powered by 12 V , the holding electromagnet holds a mass of 70 kg under standard acceleration due to gravity (9.8 m/s 2 ). Current consumption during operation is...Peltier Cell TEC1-12705 12V / 5A
The cooling cell applied, for example, in portable refrigerators. It is supplied with the voltage up to 12 V, it consumes up to 5 A of current. Board sizes - 40 x 40 x 4 mm.Insulated PVC Coated 30AWG Wire Wrapping Wires Reel 1000Ft - blue
PVC cable wrapped on a roll. Used e.g. for alarm and intercom systems. Length equal to 250m. Blue color.Quartz resonator 16MHz - UC49 - SMD - low - 10pcs
The quartz resonator in a small case for surface mounting (SMD).Membrane keypad - 4 coloured keys - self-adhesive
Furniture keyboard with 4 coloured buttons, to connect the keyboard a tape ended with a 5-pin female connector is used. Raster of the connector leads is 2.54 mm . The...Strip LED SMD5050 IP65 14,4W, 60 LED/m, 10mm, natural white - 5m
LED strip powered by a voltage of 12 V with self-adhesive tape. Consumes power: 14.4 W/m, density of 60 diodes per meter. The color of the light is natural white. Protection...Adapter IDC 10pin 1.27mm - Molex PicoBlade 1.25mm + connectors for PMS7003 sensor
The adapter allows for signal transmission from the connector IDC 10 pin on Molex PicoBlade connector with a pitch of 1.25 mm and has four soldered goldpin pins of 2.54 mm....Driver for addressed LED strips Bluetooth SP110E
Remote-controlled controller to control the lighting of the addressed LED bars. The operating voltage is between 5 V and 24 V. The distance of the remote control can be up to...BLS connector - 4x2 socket - 5 pcs.
The socket for the BLS cable, pitch of 2.54 mm. The set includes 5 slots of 4x2.Electromagnet holding 12V 2W 5kgf
Holding electromagnet with a maximum load capacity of 5 kg (at standard gravitational acceleration of 9.8 m/s 2 ). Powered by 12 V. Current consumption is...Angled DC adapter 5.5/2.1mm - angular
The angled adapter making possible the connection of the cable to the 5.5 / 2.1 mm tip everywhere, where the straight adapter just doesn't fit. It can be used as a power source...Female socket 1x6 raster 2,54mm for Arduino - 5 pcs.
6-pin female strap used in the Arduino Uno and Leonardo. Raster: 2.54 mm. Price for 5 pieces.Driver for addressed LED strips WiFi SP108E LED WiFi Controller LED Shop
WiFi controller with remote control of LEDs, addressed LED bars. Remote control works up to 30 m. Power supply voltage ranges from 5 V to 24 V. Control is done from a free...Insulated PVC Coated 30AWG Wire Wrapping Wires Reel 820Ft - violet
PVC cable wound up on a roll. It is used, for example, for alarm installation and intercoms. Length is equal to 250 m. The cable is purple.Stepper Motor JK42HS34-0404 200 steps/pr 12V/0,4A/0,25Nm
A bipolar stepper motor, four wired. It has a resolution of 200 steps per rotation (1.8 degree). It is powered with a voltage of 12.0 V, consumes a current of 400 mA per coil....Resistor kit THT 1/4 W tolerant 1% - 1280pcs
Set of 64 values of coal resistors of 0.25 W with the tolerance of 1 %, 20 pieces of each. The elements are signed, what facilitates finding the desired value.Quartz resonator 12MHz - HC49 - small - 10 pcs.
Quartz resonator in low-profile, through-hole housing.Straight 2-pin Molex 51005 plug, 2mm raster with wire
2-pin, female connector Molex 51005 type with the cable with the length of 15 cm. Pitch is equal to 2 mm.Arcade Push Button 3,3cm black case - white with backlight
Button with an outer diameter of 33 mm and height of 60 mm with integrated LED illuminating the dome in the white color. To the button attached is a simple limit switch.Bridge rectifier S125 - 250V/1A - single phase - 10pcs.
Set of 10 rectifier bridges with a maximum voltage of 250 V and a current of 1 A. Designed for SMT surface mounting.
