List of products by brand OEM - Strona 16
Electromagnet holding 12V 15W 240kgf
Holding electromagnet with a maximum load capacity of 240 kg (at standard gravitational acceleration of 9.8 m/s 2 ). Powered by 12 V. Current consumption is approximately...Liquid flow sensor YF-S402 6l / min - M11x1,25mm thread
Sensor of liquid flow operating in the range from 0.3 to 6 liters per minute. Is supplied with the voltage from 3,5 V to 24 V, the output signal is a frequency proportional to...Electromagnet holding 12V 10W 70kgf
Powered by 12 V , the holding electromagnet holds a mass of 70 kg under standard acceleration due to gravity (9.8 m/s 2 ). Current consumption during operation is...Peltier Cell TEC1-12705 12V / 5A
The cooling cell applied, for example, in portable refrigerators. It is supplied with the voltage up to 12 V, it consumes up to 5 A of current. Board sizes - 40 x 40 x 4 mm.Phototransistor SFH-313FA 5mm 870nm - 5 pcs
Phototransistor in the case of 5 mm. Maximum sensitivity for the wave with the length of 870 nm. Darkened lens. 5 pcs.Pulling electromagnet 12V 0,5kg
A device whose task is to perform linear motion - pulling, after giving a 12 V voltage signal. The electromagnet draws about 0.6 A current. The range of the pin is 5 mm....TCST1103 photoelectric sensor - optocoupler
Slit width: 3 mm. Maximum voltage - 70 Volts .Four-channel opto-isolator A87 TLP281
4-channel opto-isolator designed to connect digital systems such as microcontrollers 5 V for high voltage systems. Maximum input voltage is 24 V.Electric liquid pump 130l/h 12V
Electric pump for liquids in black. It has a 1.6 m long cable and a DC socket 5.5 x 2.1 mm. The pump dimensions are small: 35 x 35 x 35 mm. It is designed for pumping out water...Raspberry Pi camera tape - 5cm 15-core 1mm raster
Tape with a length of 5 cm connecting the minicomputer Raspberry Pi with the dedicated camera. The connector has 15 veins, pitch is 1 mm.Linear voltage regulator LDO 5V LM1117T-5.0 - THT TO220
Low-Dropout linear stabilizer. Output voltage: 5 V. Maximum output current: 1.5 A. TO220 housing.Female socket extended 1x6 raster 2,54mm for Arduino
6-pin female connector strip, allows you to extend the Arduino connectors. Raster: 2.54 mm.Nylon Distance Bolts 20mm with M3 Thread - 10pcs.
Distance made of plastic, with a length of 20 mm and M3 thread. Price is for 10 pieces. Elements of this type allow to keep a constant distance between the mounted boards.Female socket extended 1x10 raster 2,54mm for Arduino - 5pcs
10-pin female connector strip, allows you to extend the Arduino connectors. Raster: 2.54 mm. Pirce for 5 pcs of connectors.Female socket 1x6 raster 2,54mm for Arduino - 5 pcs.
6-pin female strap used in the Arduino Uno and Leonardo. Raster: 2.54 mm. Price for 5 pieces.RGB LED Strip WS2813 - digital, addressed - 30 LED/m, 9W/m, 5V - 5m, IP30
Individually addressed RGB LEDs placed on a 5 m panel with a density of 30 LEDs per meter. Each pixel can emit a color from 24-bit palette.Straight 2-pin Molex 51005 plug, 2mm raster with wire
2-pin, female connector Molex 51005 type with the cable with the length of 15 cm. Pitch is equal to 2 mm.Quartz resonator 16MHz - UC49 - SMD - low - 10pcs
The quartz resonator in a small case for surface mounting (SMD).Membrane keypad - 4 coloured keys - self-adhesive
Furniture keyboard with 4 coloured buttons, to connect the keyboard a tape ended with a 5-pin female connector is used. Raster of the connector leads is 2.54 mm . The...BLS connector - 4x2 socket - 5 pcs.
The socket for the BLS cable, pitch of 2.54 mm. The set includes 5 slots of 4x2.Arcade Push Button 3,3cm black case - white with backlight
Button with an outer diameter of 33 mm and height of 60 mm with integrated LED illuminating the dome in the white color. To the button attached is a simple limit switch.
