- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
Camera RpiCam OV5647 5MPx - night fisheye 160° - for Raspberry Pi
Index: ODS-12759
- Reduced price
- Sale
List of products by brand OEM - Strona 15
Loading...
RFiD keychain - 125kHz - 10szt.
The RFID identifier in the form of a keychain. Each chip has a unique code. The device works at a distance of 2 - 5 cm from the reader , the carrier frequency is 125 kHz....
Index: MOD-09413
Index: MOD-09413
Numeric keypad, self-adhesive, 12 keys
Simple numeric keyboard with the numbers from 0 to 9 and the signs: * and #. The reverse side has a self-adhesive tape for facilitating the installation.
Index: MOD-01681
Index: MOD-01681
Cable USB-A to USB-C On/Off switch black - 0.9 m
USB cable A - C in length 90 cm , in color black . Compatible with Raspberry Pi 4B. Designed to charge devices that have a USB C socket. The cable has a built-in On/Off...
Index: DNG-16185
Index: DNG-16185
Peltier Cell TEC1-12715 12V / 12A
The cooling cell applied, for example, in portable refrigerators. It is supplied with the voltage up to 12 V, it consumes up to 11. 8 A of current. Board sizes - 40 x 40 x 3.3...
Index: DNG-10022
Index: DNG-10022
Disassembly tool for DIP elements - 38mm
Tool for easy removal of DIP chips from slots and sockets. Maximum jaw opening is 38 mm.
Index: KAB-06019
Index: KAB-06019
10-segment LED Bar Display OSX10201-RGG1
10-segment LED display, the range of colors is 4 x red and 6 x green. It can be used for example as a temperature gauge or liquid level.
Index: LED-08172
Index: LED-08172
5mm 12V LED with resistor and wire - yellow
5mm yellow LED with attached resistor and 20cm long wire. Powered by 12 V DC. Price for 5 pcs .
Index: LED-03721
Index: LED-03721
Quick connector DC 5.5 x 2.1mm
DC φ5.5 x 2.1 mm socket (for AC adapter) with the connector allowing you to mount the cable using the buttons.
Index: KAB-07466
Index: KAB-07466
Male pin for case raster 5,08mm 10pcs
A set of ten male pins for the slot's case, pitch of 5,08 mm.
Index: KAB-03917
Index: KAB-03917
Strip LED SMD2835 IP20 4,8W, 60 LED/m, 8mm, natural white - 5m
LED strip powered by a voltage of 12 V with self-adhesive tape. Consumes power: 4.8 W/m, density of 60 diodes per meter. The color of the light is natural white. Protection...
Index: LED-07091
Index: LED-07091
Li-pol 1-8S voltage indicator with P309 buzzer
Voltage indicator for Li-Pol batteries (from 1 to 8 cells) equipped with a low voltage sounder.
Index: MOD-05015
Index: MOD-05015
Chassis Round 2WD - Robot Chassis with DC Motor Drive
Transparent, universal platform, allowing you to build a robot, e.g. line follower or fighting robot (sumo). For control, you can use any controller, including Arduino with...
Index: ROB-07243
Index: ROB-07243
Connecting cables female-female 20cm blue - 100pcs
Set of 100 high quality connecting cables with a length of 20 cm in blue color.
Index: DNG-11912
Index: DNG-11912
Numeric self-adhesive membrane keypad - 4 keys
Simple numeric keypad with numbers: 1 to 4. Self-adhesive tape on the back for easy installation.
Index: MOD-04266
Index: MOD-04266
IR transmitter VSLB3940 3mm 940nm
Infrared transmitter in a 3 mm threaded housing. Emitted wavelength 940 nm.
Index: LED-00869
Index: LED-00869
RGB LED strip WS2813 - digital, addressed - IP65 60LED/m, 18W/m, 5V - 5m
Individually addressed RGB LEDs placed on a 5 m panel with a density of 60 LEDs per meter. Each pixel can emit a color from 24-bit palette.
Index: LED-08734
Index: LED-08734
Four-channel opto-isolator A87 TLP281
4-channel opto-isolator designed to connect digital systems such as microcontrollers 5 V for high voltage systems. Maximum input voltage is 24 V.
Index: MOD-09909
Index: MOD-09909
Pulling electromagnet 12V 0,5kg
A device whose task is to perform linear motion - pulling, after giving a 12 V voltage signal. The electromagnet draws about 0.6 A current. The range of the pin is 5 mm....
Index: DNG-17757
Index: DNG-17757
Nozzle cleaning needle 0,15mm - 5 pcs
A needle to remove any residual print material accumulated in the 3D printer nozzles. The use of needles allows to ensure proper movement of the filament. The product is...
Index: DNG-17415
Index: DNG-17415
TCST1103 photoelectric sensor - optocoupler
Slit width: 3 mm. Maximum voltage - 70 Volts .
Index: UCC-00372
Index: UCC-00372
Nylon Distance Bolts 20mm with M3 Thread - 10pcs.
Distance made of plastic, with a length of 20 mm and M3 thread. Price is for 10 pieces. Elements of this type allow to keep a constant distance between the mounted boards.
Index: AKS-11162
Index: AKS-11162
Liquid flow sensor YF-S402 6l / min - M11x1,25mm thread
Sensor of liquid flow operating in the range from 0.3 to 6 liters per minute. Is supplied with the voltage from 3,5 V to 24 V, the output signal is a frequency proportional to...
Index: SEE-04410
Index: SEE-04410
Female socket extended 1x10 raster 2,54mm for Arduino - 5pcs
10-pin female connector strip, allows you to extend the Arduino connectors. Raster: 2.54 mm. Pirce for 5 pcs of connectors.
Index: SPF-01750
Index: SPF-01750
Female socket extended 1x6 raster 2,54mm for Arduino
6-pin female connector strip, allows you to extend the Arduino connectors. Raster: 2.54 mm.
Index: SPF-01849
Index: SPF-01849