- Sale
- Sale
List of products by brand OEM - Strona 18
Loading...
Arcade Push Button 3,3cm black case - yellow with backlight
Button with an outer diameter of 33 mm and height of 60 mm with integrated LED illuminating the dome in the yellow color. To the button attached is a simple limit switch.
Index: SWT-05285
Index: SWT-05285
Connecting cables female-female 20cm red - 100pcs
Set of 100 copper connecting wires 26AWG with the length of 20 cm in red color.
Index: DNG-11913
Index: DNG-11913
Heat shrink tube 1.6/0.8 red - 10pcs
The diameter before heat shrink: 1.6 mm diameter after heat shrink: 0.8 mm. Price for 10 x 1 meter.
Index: NSZ-00085
Index: NSZ-00085
Mini vibration motor 10x2mm - 3V
Miniature vibrating motor . It is powered by a voltage of 3 V. The dimensions of the module are equal: diameter 10 mm, height 2 mm . Current consumption is 80 mA . The...
Index: DNG-17924
Index: DNG-17924
Voltage divider 5V/25V for Arduino
A voltage divider is used, when the measured voltage has a larger value than the A/D converter's range. The device works in the range from 0 V to 25 V. The output voltage has a...
Index: MOD-08231
Index: MOD-08231
Heat shrink tube 2,4/1,2 black - 10pcs
Heat shrinkable tubes with diameter of 2,4 mm. The product is used to protect cables with removed insulation or to sheath a broken optical fibre. After heating the tube shrinks...
Index: NSZ-00914
Index: NSZ-00914
Set of THT CF 1/4W resistors 1% - 2600pcs.
Set of 130 values of coal resistors of 0.25 W with the tolerance of 1 %, 20 pieces of each. The elements are signed, what facilitates finding the desired value.
Index: AKS-12063
Index: AKS-12063
Pamięć EEPROM 1kb I2C 24LC01B-I/P - 5pcs.
The system allows to increase the EEPROM memory of the microcontroller with 1 KB. The memory is divided to 128 of 8-bit blocks. It communicates with the central unit via the...
Index: UCC-04744
Index: UCC-04744
- Sale
Tact Switch 12x12, 7mm THT 6pin - white backlight - 5pcs.
A small monostable button mounted in a through-hole way - THT with six pins with the size: 12x12 mm, height: 7 mm. The button is with the backlight in the white color.
Index: SWT-04784
Index: SWT-04784
Zener Diode 0.5W 6.8V - 10 pieces
Zener diode with power of 0,5 V and a voltage of 6,8 V. The set includes 10 pieces.
Index: PAS-06691
Index: PAS-06691
Strip LED SMD5050 IP20 14,4W, 60 LED/m, 10mm, RGB - 5m
RGB LED strip powered by a voltage of 12 V with self-adhesive tape. Consumes power: 14.4 W/m, density of 60 diodes per meter. Protection factor IP20. Price for a package, which...
Index: LED-07075
Index: LED-07075
Set of female connectors for Arduino Uno and Leonardo
Straps used in the Arduino Uno and Leonardo. The kit includes four straps: 2 x 8-pin, 1 x 10-pin and 1 x 6-pin.
Index: KAB-01988
Index: KAB-01988
Pulling electromagnet 12V 8,4W 3,5kg
A device which, under the influence of providing a 12-volt voltage pulse, performs a pulling linear motion. The range of the electromagnet pin is 12 mm and its maximum load...
Index: DNG-17762
Index: DNG-17762
Nylon Distance Bolts 25mm with M3 Thread - 10pcs.
Distance made of plastic, with a length of 25 mm and M3 thread. Price is for 10 pieces. Elements of this type allow to keep a constant distance between the mounted boards.
Index: AKS-11163
Index: AKS-11163
Heatsink with a 92mm fan for the Peltier 40mm cell
The heatsink with fan 92 x 92 mm, designed to dissipate heat from the peltier cell 40 mm. included is also the thermal conductive paste and mounting screws.
Index: DNG-10024
Index: DNG-10024
Arcade Push Button 3,3cm black case - green with backlight
A push button with an outside diameter of 33 mm and a height of 60 mm, with a built-in LED that illuminates the dome in green. A simple limit switch is included with the button.
Index: SWT-05282
Index: SWT-05282
WiFi module ESP-07 ESP8266 Black - 9 GPIO, ADC
Wi-fi module based on the ESP8266 chip. It works in wi-fi 802.11 b/g/n standard at 2.4 GHz frequency. It is equipped with 16 pins - pitch of 2 mm, 9 of which are GPIO, 1 ADC...
Index: DNG-13212
Index: DNG-13212
Index: KAB-00647
Membrane keypad - 3 coloured buttons - self-adhesive
Equipped with 3 colour membrane keypad buttons . Simple input device allowing to control projects e.g. based on Arduino or STM32. Keyboard leads are made in the form of 90 mm...
Index: DNG-16995
Index: DNG-16995
Pair of JST - BEC connectors for Li-Pol batteries
The set includes a pair of BEC (JST) connectors - socket, plug and plates.
Index: AKC-02865
Index: AKC-02865
Set of 27mm, 35mm, 44mm crocodile clips- 70pcs
Crocodile connectors with lengths of 27, 35 and 44 mm and equipped with a cover in different colours. Connection to wires, pins or feet is much easier with the use of...
Index: KAB-06000
Index: KAB-06000
Index: AKC-06430
Index: AKC-06431
Insulated PVC Coated 30AWG Wire Wrapping Wires Reel 656Ft - red
Single-core PVC cable wound on a roll. Used, for example, for alarm and intercom systems. Its small cross-section makes it suitable for all low-power installations, such as...
Index: KAB-08153
Index: KAB-08153