- New
- Sale
- Sale
Mini fan - Unit expansion module for development modules M5Stack
Index: MSS-18058
- Reduced price
- Sale
- Reduced price
- Sale
List of products by brand OEM - Strona 25
Loading...
Electrolytic capacitor Low ESR 10uF/50V 5x11mm 105C THT - 10pcs
The ectrolytic through hole capacitor of low impedance (LOW ESR) 10 uF / 50 V. Pins' pitch: 2 mm. Size Ø5 x 11 mm. Price is for 10 pieces.
Index: PAS-01224
Index: PAS-01224
Breadboard is used for creating and testing electronic circuits in color green.
Index: AKS-10287
Index: AKS-10287
Index: KAB-01387
Breadboard is used for creating and testing electronic circuits in color white.
Index: PLY-00605
Index: PLY-00605
THT CF carbon resistor 1/4W 56kΩ - 30pcs.
Set of 30 1/4 W resistors. The elements are mounted in THT chrono housing.
Index: PAS-04953
Index: PAS-04953
- Sale
USB extension cable A - A with On/Off switch black - 0.5 m
The USB A - A 2.0 cable is black , 0.5 m long and serves as an extension cable for powering devices and data transmission between them. It has a USB A plug on one side and a...
Index: DNG-16186
Index: DNG-16186
WiFi module ESP-12S ESP8266 Black - 9 GPIO, ADC, PCB antenna
Wi-fi module based on the ESP8266 chip. It works in standard wi-fi 802.11 b/g/n at 2.4 GHz. It is equipped with 16 pins - pitch of 2 mm, 9 of which is GPIO, 1 ADC and UART....
Index: DNG-10704
Index: DNG-10704
Case for Raspberry Pi Zero V1.3 - open - transparent
Transparent case for Raspberry Pi Zero minicomputer with external dimensions of 65 x 3 4 x 15 mm . In the set is also a heatsink with thermocnductive tape.
Index: DNG-11854
Index: DNG-11854
Tact Switch 12x12, 7mm THT 6pin - green backlight - 5pcs.
A small monostable button mounted in a through-hole way - THT with six pins with the size: 12x12 mm, height: 7 mm. The button is with the backlight in the green color.
Index: SWT-04786
Index: SWT-04786
A bipolar stepper motor, four wired. It has a resolution of 200 steps per revolution (1.8 degree). It is powered by a voltage of 12.0 V, consumes a current of 400 mA per coil....
Index: MOT-06424
Index: MOT-06424
Set of copper tips for soldering stations - Copper series 900M - 10pcs
Set of copper soldering tips for soldering station series Copper, work with stations: 936, 937, 803, 738, 995da+, etc.
Index: DLT-12079
Index: DLT-12079
Speaker MG15 0.1W 8Ohm - 15x4mm
A speaker with a power of 0.1 W, 8 Ω, dimensions 15 x 4 mm.
Index: EAK-03467
Index: EAK-03467
Tact Switch 10x10mm with cap - square red- 5pcs
Size: 12 x 12 mm, square nozzle: 10 x 10 mm, color of the nozzle: red. Price is for 5 pieces.
Index: SWT-11134
Index: SWT-11134
Electric lock - electromagnet with pull out pin
Electric lock powered with voltage of 12 V. Used e.g. for electronically controlled door, windows or drawers locking systems.
Index: MOD-05687
Index: MOD-05687
BME280 - humidity, temperature and pressure sensor 110 kPa I2C / SPI - 3.3V - soldered connectors
Very easy to use temperature, humidity and pressure sensor. The module is powered by 3.3 V and can also communicate via I2C or SPI interface . Sensors of this type are...
Index: ZES-16534
Index: ZES-16534
Module 8 relays with optoisolation - 10A / 250VAC contacts - 5V coil
The module has eight SRD-12 relay with a coil powered with a voltage of 12 V along with optical isolation of the input and mounting holes. The system allows you to control...
Index: GRL-10915
Index: GRL-10915
Raspberry Pi camera tape - 20cm 15-core 1mm raster
Tape with a length of 20 cm connecting the minicomputer Raspberry Pi with the dedicated camera. The connector has 15 veins, pitch is 1 mm.
Index: RPI-01908
Index: RPI-01908
Digital light sensor with regulation - photoresistor + potentiometer
Module with photoresistor for Arduino. It is controlled by a digital signal, it is powered with the voltage from 3.3 V to 5 V. On board placed was a potentiometer to adjust the...
Index: GRL-12503
Index: GRL-12503
Nozzle cleaning needle 0,3mm - 5 pcs
A device for clearing 0.3 mm nozzles used in 3D printers. The flexible material from which the product is made does not cause mechanical damage to the nozzle. The high...
Index: DNG-17418
Index: DNG-17418
Battery holder for 6x AA (R6) - 1x6
Six AA type batteries (large fingers). It has lead wires with insulation removed at their ends for easy installation.
Index: AKC-07031
Index: AKC-07031
Power supply POS-50-5-C2 - 5V/10A/50W
Mounting power supply with 50 W . Input voltage from 100 V to 240 V AC . Output voltage is 5 V . Output current up to 10 A .
Index: WAK-12246
Index: WAK-12246
Optoisolation relay module 8 channel - 10A/250VAC contacts - 12V coil - blue
The module has eight relay with a coil powered with a voltage of 12 V along with optoelectronic insulation. The system allows you to control actuators with microcontroller...
Index: MOD-03285
Index: MOD-03285
Adapter socket 5.5/2.1mm - microUSB plug
Adapter that allows for connection of the cable with the tip 5,5 / 2,1 mm with slot with type of microUSB. It can be used as an adapter to power Arduino and Raspberry Pi.
Index: KAB-05716
Index: KAB-05716