- Reduced price
- Sale
- Sale
- Sale
List of products by brand OEM - Strona 32
Loading...
Temperature sensor TMP36GT9Z - analog THT
Analog thermometer, in which the output voltage is proportional to the measured temperature from the range: -40 °C to +120 °C. It is powered with the voltage from 2.7 to 5.5 V.
Index: SES-02558
Index: SES-02558
Magnetic sensor to open Door / window - reed contact CMD14 + screws
Wired proximity sensor activated magnetically. The device is used to determine the position of doors and windows. Case dimensions - 14 x 27 mm.
Index: SES-03104
Index: SES-03104
Connecting cables female-male 30cm colored - 50pcs
Set of 50 high-quality connecting cables with a length of 30 cm in different colours.
Index: KAB-01438
Index: KAB-01438
HDMI - microHDMI cable, male-male, with the length of 1.5 meter . It can be used to transfer the image onto the Raspberry Pi 4 or 5. Gilded tips provide excellent connection...
Index: LAM-14729
Index: LAM-14729
BLS connector - 4x1 socket - 5pcs.
The socket for the cable of the BLS type, pitch of 2.54 mm. The set includes 5 slots of 4x1.
Index: KAB-04624
Index: KAB-04624
Li-Ion charger TP4056 1S 3,7V microUSB with protection
A simple charger for single-cell lithium-ion batteries with a nominal voltage of 3.7V. The system is powered via a microUSB connector or via cables. The module is protected...
Index: MOD-06944
Index: MOD-06944
Battery holder - 3 x AA (R6) with cover and switch
Basket with lid and switch for three AA batteries (big sticks).
Index: AKC-00174
Index: AKC-00174
Brass Distance Sleeve - 10mm - 10pcs.
Distance sleeve which allows the mounting of printed circuit boards, brackets, modules, etc. It is used, when it is necessary to separat e electric elements. Sleeve...
Index: KAB-07802
Index: KAB-07802
2x20 goldpin plug for Raspberry Pi - colored markings
40-pin goldpin plug is compatible with the GPIO connector on a Raspberry Pi Zero and 2B, 3B, 3B+ and 4B. The plug has a colored marking for individual pins, which facilitates...
Index: ODS-12127
Index: ODS-12127
Potentiometer mounting lying 20kΩ - 5pcs
Horizontal mounting potentiometer RM-065 in the through hole case with a resistance of 20 kΩ. Price is for 5 pieces.
Index: PAS-01238
Index: PAS-01238
Relay module 1 channel with optoisolation - 10A/250VAC contacts 5V coil
The module is equipped with relay SRD-05 with coil powered with a voltage of 5 V with optical isolation of input and mounting holes. The system allows you to control actuators...
Index: MOD-01997
Index: MOD-01997
Photoresistor 20-30kΩ GL5537-1 - 10pcs
Photoresistor GL5537-1 with the resistance of 20 to 30 kΩ, 100 mW of power and a size of 5x2 mm.
Index: SES-01563
Index: SES-01563
ESP32 WiFi + BT 4.2- platform with ESP-WROOM-32 module compatible with ESP32-DevKit
ESP32-DevKitC board with a built-in ESP-WROOM-32 module. The module has goldpin pins, 2.54mm pitch. This ESP32-based device is designed for WiFi network communication in...
Index: MOD-08893
Index: MOD-08893
Solder wick for removing tin excess. Width 3 mm, length 1.5 m.
Index: NSZ-01478
Index: NSZ-01478
Female socket 2x20 raster 2,54mm for Raspberry Pi
40 -pin female connector strip used in Raspberry Pi model 4B/3B+/3B/2B/Zero. Raster 2.54 mm.
Index: UCC-05578
Index: UCC-05578
The matrix consists of 16 tact switch buttons spread out in four rows and four columns. Signals are output on 8 popular goldpin connectors - 2.54 mm raster.
Index: MOD-02895
Index: MOD-02895
Relay 2 channel module with optoisolation - 10A/250VAC contacts - 5V coil
The module has two relays SRD-05 with a coil powered with a voltage of 5 V with optical isolation of input and mounting holes. The system allows you to control the actuators...
Index: MOD-02170
Index: MOD-02170
Photoresistor GL5539 with the resistance of 50 to 100 kΩ, 100 mW of power and a size of 5x2 mm.
Index: SES-04597
Index: SES-04597
Quartz resonator 16MHz - HC49 - low - 10 pcs.
A set of quartz resonators in a low-profile, through-hole case. 10 pieces.
Index: PAS-00166
Index: PAS-00166
Relay module 4 channels with optoisolation - 10A/250VAC contacts - 5V coil
The module is equipped with four relays JQC-3F with a coil powered with a voltage of 5 V with optical isolation of input and mounting holes. The system allows you to control...
Index: MOD-02579
Index: MOD-02579
Zener diode of 0,5 W and voltage of 3,3 V. Price for 10 pieces.
Index: PAS-04933
Index: PAS-04933
Monolithic capacitor 10nF/50V - 10pcs
10 nF / 50 V monolithic capacitor. Leads pattern: 5 mm. Length with leads: 14 mm. Price for 10 pieces.
Index: PAS-04928
Index: PAS-04928
LED RGB 5mm common cathode - 5pcs.
A single 5 mm led RGB common cathode. Has a transparent lens and shines at an angle of 30°. The color is transferred in three digit RGB (red, green, blue). With these LEDs, you...
Index: UCC-00547
Index: UCC-00547
Set of CF THT 1/4W described resistors - 160pcs.
A set of 16 values of through hole resistors of 0,25 W with the tolerance of 5 %, 10 pieces each. The elements are signed, what facilitates finding the desired value.
Index: PAS-04322
Index: PAS-04322