- New
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
List of products by brand OEM - Strona 31
Loading...
Jumper adjusted to goldpin type connectors - 2,54 mm pitch. Price for 10 pieces.
Index: KAB-00556
Index: KAB-00556
Module with socket allows you to connect a USB plug to any system. Output raster: 2.54 mm suitable for standard breadboards and connection cables, available in our store.
Index: MOD-04873
Index: MOD-04873
WiFi module ESP-12E ESP8266 Black - 11 GPIO, ADC, PCB antenna
Wi-fi module based on the ESP8266 chip. Works in standard wi-fi 802.11 b/g/n at 2.4 GHz. Equipped with 22 leads - pitch 2 mm, of which 11 is GPIO, 1 ADC and SPI. Has a built-in...
Index: MOD-05463
Index: MOD-05463
BLS connector - 1x1 socket - 5pcs.
Socket for BLS type cable, 2.54 mm pitch. The set includes 5 1x1 sockets.
Index: KAB-05204
Index: KAB-05204
Magnetic sensor to open Door / window - reed contact CMD14 + screws
Wired proximity sensor activated magnetically. The device is used to determine the position of doors and windows. Case dimensions - 14 x 27 mm.
Index: SES-03104
Index: SES-03104
Temperature sensor TMP36GT9Z - analog THT
Analog thermometer, in which the output voltage is proportional to the measured temperature from the range: -40 °C to +120 °C. It is powered with the voltage from 2.7 to 5.5 V.
Index: SES-02558
Index: SES-02558
Connecting cables female-male 30cm colored - 50pcs
Set of 50 high-quality connecting cables with a length of 30 cm in different colours.
Index: KAB-01438
Index: KAB-01438
HDMI - microHDMI cable, male-male, with the length of 1.5 meter . It can be used to transfer the image onto the Raspberry Pi 4 or 5. Gilded tips provide excellent connection...
Index: LAM-14729
Index: LAM-14729
BLS connector - 4x1 socket - 5pcs.
The socket for the cable of the BLS type, pitch of 2.54 mm. The set includes 5 slots of 4x1.
Index: KAB-04624
Index: KAB-04624
Li-Ion charger TP4056 1S 3,7V microUSB with protection
A simple charger for single-cell lithium-ion batteries with a nominal voltage of 3.7V. The system is powered via a microUSB connector or via cables. The module is protected...
Index: MOD-06944
Index: MOD-06944
Battery holder - 3 x AA (R6) with cover and switch
Basket with lid and switch for three AA batteries (big sticks).
Index: AKC-00174
Index: AKC-00174
Contact board for creating and testing electronic circuits in black.
Index: AKS-10289
Index: AKS-10289
Brass Distance Sleeve - 10mm - 10pcs.
Distance sleeve which allows the mounting of printed circuit boards, brackets, modules, etc. It is used, when it is necessary to separat e electric elements. Sleeve...
Index: KAB-07802
Index: KAB-07802
2x20 goldpin plug for Raspberry Pi - colored markings
40-pin goldpin plug is compatible with the GPIO connector on a Raspberry Pi Zero and 2B, 3B, 3B+ and 4B. The plug has a colored marking for individual pins, which facilitates...
Index: ODS-12127
Index: ODS-12127
Relay module 1 channel with optoisolation - 10A/250VAC contacts 5V coil
The module is equipped with relay SRD-05 with coil powered with a voltage of 5 V with optical isolation of input and mounting holes. The system allows you to control actuators...
Index: MOD-01997
Index: MOD-01997
Potentiometer mounting lying 20kΩ - 5pcs
Horizontal mounting potentiometer RM-065 in the through hole case with a resistance of 20 kΩ. Price is for 5 pieces.
Index: PAS-01238
Index: PAS-01238
ESP32 WiFi + BT 4.2- platform with ESP-WROOM-32 module compatible with ESP32-DevKit
ESP32-DevKitC board with a built-in ESP-WROOM-32 module. The module has goldpin pins, 2.54mm pitch. This ESP32-based device is designed for WiFi network communication in...
Index: MOD-08893
Index: MOD-08893
Photoresistor 20-30kΩ GL5537-1 - 10pcs
Photoresistor GL5537-1 with the resistance of 20 to 30 kΩ, 100 mW of power and a size of 5x2 mm.
Index: SES-01563
Index: SES-01563
The matrix consists of 16 tact switch buttons spread out in four rows and four columns. Signals are output on 8 popular goldpin connectors - 2.54 mm raster.
Index: MOD-02895
Index: MOD-02895
Solder wick for removing tin excess. Width 3 mm, length 1.5 m.
Index: NSZ-01478
Index: NSZ-01478
Female socket 2x20 raster 2,54mm for Raspberry Pi
40 -pin female connector strip used in Raspberry Pi model 4B/3B+/3B/2B/Zero. Raster 2.54 mm.
Index: UCC-05578
Index: UCC-05578
Relay 2 channel module with optoisolation - 10A/250VAC contacts - 5V coil
The module has two relays SRD-05 with a coil powered with a voltage of 5 V with optical isolation of input and mounting holes. The system allows you to control the actuators...
Index: MOD-02170
Index: MOD-02170
Photoresistor GL5539 with the resistance of 50 to 100 kΩ, 100 mW of power and a size of 5x2 mm.
Index: SES-04597
Index: SES-04597
Zener diode of 0,5 W and voltage of 3,3 V. Price for 10 pieces.
Index: PAS-04933
Index: PAS-04933