- New
List of products by brand OEM - Strona 30
Loading...
A small device for cleaning the filament, used in 3D printers. The cleaner should be placed on the pillar. Located in the plastic housing, the sponge collects dirt from the...
Index: DNG-17470
Index: DNG-17470
Tact Switch 12x12mm cap black - 5 pieces
Size: 12 x 12 mm, square nozzle: 10 x 10 mm, color of the nozzle: black. Price is for 5 pieces.
Index: SWT-11138
Index: SWT-11138
The jumper is designed for goldpin connectors - pitch of 2.54 mm. Price is for 10 pieces.
Index: KAB-09755
Index: KAB-09755
DS18B20 temperature sensor + 4,7kΩ resistors
This kit consists of one temperature sensor DS18B20 with the 1-wire interface and ten resistors of 4.7 kΩ in the through-hole case.
Index: SES-09821
Index: SES-09821
Potentiometer mounting lying 100kΩ - 5pcs
Horizontal mounting potentiometer RM-065 in the through hole case with a resistance of 100 kΩ. Price is for 5 pieces.
Index: PAS-01236
Index: PAS-01236
Hi-Link Power Supply HLK-PM01 100V-240VAC / 5VDC - 0.6A
The HLK-PM01 power supply from Hi-Link converts mains voltage (AC) from 100V to 240V into 5V direct current (DC) with a current capacity of 0.6A. It is ideal for powering...
Index: DNG-10929
Index: DNG-10929
Nozzle cleaning needle 0,4mm - 5 pcs
Nozzle cleaning needle for 3D printers. Dedicated to nozzles of 0.4 mm diameter . Allows you to clear the hole sealed with a filament. Thanks to its high flexibility, the...
Index: DNG-17420
Index: DNG-17420
D-SUN Step-down Voltage Regulator - 1,0V-17V 1,8A
Module with step-down converter. Input voltage from 4.75 V to 23 V. Maximum continuous output current 1,8 A. Output voltage adjustable from 1.0 V to 17 V.
Index: MOD-08229
Index: MOD-08229
Set of CF THT 1/4W resistors described - 330pcs.
Set of 33 values of through hole resistor of 0,25 W with the tolerance of 5 %, 10 pieces of each. The elements are signed, which facilitates finding the desired value.
Index: PAS-04547
Index: PAS-04547
Raspberry Pi camera tape - 30cm 15-core 1mm raster
Tape with a length of 30 cm connecting the minicomputer Raspberry Pi with the dedicated camera. The connector has 15 veins, pitch is 1 mm.
Index: RPI-01909
Index: RPI-01909
PVC wire 0.25mm AWG30 - 8 colors - roll 250m
PVC cable wrapped on a roll. Used e.g. for alarm and intercom systems. Length equal to 250m . The subject of the sale is a roll of 8 cables in various colours ..
Index: GRL-12584
Index: GRL-12584
Battery clip 9V (6F22) with cable
A connector to facilitate the connection of popular 9-volt (6F22) batteries with cables with insulation removed at the ends.
Index: AKC-05502
Index: AKC-05502
Knife for processing 3D prints
A knife used to process finished models made with a 3D printer. It has a profiled interchangeable blade , which allows it to reach even hard to reach printout details. The...
Index: DNG-17409
Index: DNG-17409
Potentiometer mounting lying 1kΩ - 5pcs
Horizontal mounting potentiometer RM-065 in the through hole case with a resistance of 1 kΩ. Price is for 5 pieces.
Index: PAS-01234
Index: PAS-01234
Tact Switch 12x12mm with black cap - 5pcs
The size of the button: 12x12 mm, height of the nozzle: 3.5 mm, nozzle diameter: 10 mm, color of the nozzle: black. Price is for 5 pieces.
Index: SWT-11136
Index: SWT-11136
Blootooth v2.0 + EDR, class 2. It works with a voltage of 3.3 V and communicates over a serial UART interface (RX, TX pins), supports the AT commands. Maximum transmitter...
Index: MOD-06818
Index: MOD-06818
Index: AKC-00486
Bipolar transistor NPN BC337-40 45V / 0,8A - 5pcs
Bipolar transistor NPN, 45 V, 0.8 A. Pinout: CBE. Price for 5 pieces.
Index: UCC-01239
Index: UCC-01239
Transistor N-MOSFET IRF520NPBF - THT - 5pcs.
Vds: 100 V Id: 9,7 A. Rdson 0.2 Ohm. Case: TO-220.
Index: UCC-02610
Index: UCC-02610
Universal Swivel Casters Wheel for Chassis
The universal wheel is applied in robot's chassis. Wheel diameter is 25 mm, and height 35 mm.
Index: ROB-07292
Index: ROB-07292
Raspberry Pi camera ribbon wire - 45cm 15 wires 1mm raster
Tape with a length of 45.7 cm connecting the minicomputer Raspberry Pi with the dedicated camera. The connector has 15 veins, pitch is 1 mm.
Index: RPI-02442
Index: RPI-02442
Potentiometer mounting lying 5kΩ - 5pcs
Mounting potentiometer, horizontal RM-065 in a threaded housing with a resistance of 5 kΩ. Price for 5 pieces.
Index: PAS-01235
Index: PAS-01235
Relays module, 8 channels with opto-isolation - 10A/250VAC contacts - 5V coil - blue
The module has eight relays SRD-05 with coil powered with a voltage of 5 V along with optoelectronic isolation. The system allows you to control actuators with microcontroller...
Index: MOD-02966
Index: MOD-02966
Set of 5mm LEDs 10pcs with resistors
Set of ten 5 mm LEDS with resistors. The kit includes: 10 PCs resistors 1.2 kΩ and 3 PCs green, red and yellow LEDs and 1 blue LED.
Index: LED-04663
Index: LED-04663