List of products by brand OEM - Strona 29
Potentiometer knob RCL14 green - 6/14mm - 5pcs
Knob for rotation potentiometer on axis of 6 mm. The height is 20 mm and the outer diameter is 14 mm.Female socket 2x20 raster 2,54 mm for Raspberry Pi 4B/3B+/3B/3/B+ - long pins 12mm
40 -pin female strip compatible with the GPIO connector of the Raspberry Pi model 4B/3B+/3B/B+/A+/Zero with extended pins with a length of 12 mm and spacer. Terminal pitch...M2,5 PH Screws Length: 20mm - 100pcs.
The screws with the M2,5 thread and length of 20 mm.The set has 100 pieces.ARK connector KF301 raster 5,0mm 3 pin (-) - 5pcs
Screw, clamp, 3-pin conector. Pitch of 5 mm. Height of 10 mm. The screw for the flat screwdriver (-).Universal hexagonal cross wrench for 3D printer nozzle
A compact crosswrench with four hexagonal bits. Can be used for screwing nozzles in 3D printers. Four different sizes of caps, each placed on one arm of the wrench, allow...Male pin for case raster 2.5mm - 10pcs
A set of ten male pins for a 2.50 mm raster socket housing.ESP8266 wifi module + NodeMcu v3
Wi-fi module, based on ESP8266 system. On Board 10 GPIO ports (each of which can handle PWM, I2C and 1-wire), built-in 10-bit ADC and a converter USB-UART. It has installed...Four-channel 433 MHz radio module + remote control
Four-channel radio module enabling remote communication with microcontrollers by means of a remote control operating at 433 MHz . Connection of the module is very simple,...Photoresistor 10-20kΩ GL5528 - 10pcs.
Photoresistor GL5528 with the resistance of 10 to 20 kΩ, 100 mW of power and a size of 5x2 mm. Price for 10 pieces.ARK connector 5mm 2pin (+) - 10pcs
Screw, clamp, 2-pin conector. Pitch of 5 mm. Height of 8.4 mm. The screw for the cross screwdriver (+). Items are sold in sets of 10 pieces.Battery holder for 2 packs AAA (R6) with cover and switch
Basket with cover and switch for two AAA batteries (small fingers).DC 5,5/2,5mm socket with quick connection
DC φ5.5 x 2.5 mm socket (for AC adapter) with connector allowing you to fix the cable with a screwdriver.Ethernet network module ENC28J60
A module enabling the connection of microcontrollers and development kits , including Arduino, to an Ethernet network via the SPI interface.Bipolar transistor NPN BC639 80V/1A - 5pcs
Bipolar transistor NPN, 80 V, 1 A. Pinout: ECB. Price for 5 pieces.Raspberry Pi camera ribbon wire - 60cm 15 wires 1mm raster
Tape with a length of 60 cm connecting the minicomputer Raspberry Pi with the dedicated camera. The connector has 15 veins, pitch is 1 mm.Connecting cables female-female 60cm - 40pcs
Set includes 40 PCs of colorful connection cables with length of 60 cm, ended, from both sides, with female connector on goldpin.Connecting cables female-female 20cm red - 10pcs
Set of 10 connection cables with a length of 20 cm in red colour.WiFi module ESP8266 Wemos NodeMCU V3 32Mb - 11 GPIO, ADC, PWM
Wi-fi module based on ESP8266. On Board 11 GPIO ports (each of which can handle PWM, I2C and 1-wire), built-in ADC and USB-UART converter. It has installed NodeMCU software...Wheel + DC Motor 65x26mm 5V with 48:1 Gear + wires
A wheel with a tyre of 65 mm diameter and 26 mm width, together with a motor powered by 5 V , with a current consumption of about 180 mA. The motor has a gear ratio of...Rotary linear potentiometer 1kΩ 1/8W - 5 pcs.
1 kΩ linear rotary potentiometer with the power of 1/8 W. Pins's pitch is 5 mm which allows you to attach the device to the breadboard. 5 pcs.Wireless keyboard + Mini Key touchpad - black
Compact, wireless keyboard with touchpad for remote computer management. The device works with the Raspberry Pi. The set also includes a USB adapter, battery and charging...Temperature and humidity sensor DHT22 (AM2302) - module + cables
Module with temperature and humidity sensor with a digital interface, single-wired. Measuring range: temperature -40 to +80 °C, humidity 0-100% RH.
