- Sale
- Sale
- Sale
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
List of products by brand OEM - Strona 28
Loading...
Arcade Push Button 3,3cm black case - red with backlight
A push button with an outside diameter of 33 mm and a height of 60 mm, with a built-in LED that illuminates the dome in red. A simple limit switch is included with the button.
Index: SWT-05283
Index: SWT-05283
ARK connector 5mm 3 pin (+) - 5pcs
Screw, clamp, 3-pin conector. Pitch of 5 mm. Height of 8.4 mm. The screw for the cross screwdriver (+). Price for 5 pcs of conectors.
Index: GRL-13565
Index: GRL-13565
Electric cube 3pin 8A/450V in case
The 3-pin electric cube allows you to connect the wires with a voltage of 450 V with the flow of current up to 8 A. Connection pitch is 8 mm, the maximum diameter of the cable...
Index: KAB-08078
Index: KAB-08078
Stepper motor 28BYJ-48 5V / 0.1A / 0.03Nm with ULN2003 controller
Five wire stepper motor with driver on Darlington chip. It has an integrated 64:1 gear ratio, is powered by 5 V, and draws 100 mA current per coil. The holding torque...
Index: GRL-12807
Index: GRL-12807
Cell holder for 2x 18650 battery without wires
Black basket made of plastic, designed for two 18650 type batteries . It has no leads. Enables trouble-free drawing of electricity from the cells. Assembly and disassembly...
Index: DNG-16517
Index: DNG-16517
Mounting bracket for distance sensor HC-SR04
Mounting bracket for HC-SR04 distance sensor. Made of transparent acrylic with a thickness of 2.6 mm, it has two mounting holes with a diameter of 3.5 mm.
Index: MOD-04822
Index: MOD-04822
Nylon Distance Bolts 15mm - 10pcs.
Plastic distance bolts with a length of 15 mm, an outer diameter of 5 mm and an internal 3.5 mm Price for 10 pieces. Elements of this type are based on a screw, allow you to...
Index: MTN-02204
Index: MTN-02204
HLS8L-DC5V-S-C relay - 5V coil, 2x 15A/120VAC contacts
Coil voltage: 5 V, contacts: 15A/120VAC. Dimensions: 19 x 15.5 mm, height: 15.8 mm.
Index: PAS-01917
Index: PAS-01917
Temperature and humidity sensor DHT21 (AM2301) in case
Temperature and humidity sensor with a digital, single-wired interface. Measuring range: temperature -40 to 80 °C, humidity 0 to 100 % RH . Powered with voltage in the range...
Index: MOD-01884
Index: MOD-01884
IDC adapter 10pin 1.27mm - Molex PicoBlade 1.25mm + v2 connectors for PMS7003 sensor
The adapter allows for signal transmission from the connector IDC 10 pin on Molex PicoBlade connector with a pitch of 1.25 mm and has four soldered goldpin pins of 2.54 mm....
Index: DNG-13746
Index: DNG-13746
Brass Distance Sleeve - 25mm - 10pcs.
Spacer sleeve for fixing printed circuit boards, brackets, modules, etc. Used when there is a need for electrical separation of elements between each other. The length of the...
Index: KAB-07803
Index: KAB-07803
JST 2-pin plug straight, 2,0mm raster with cable
2-pin connector, type JST-PH with the cable with the length of 10 cm. The pitch is 2.0 mm.
Index: DNG-06563
Index: DNG-06563
The fan with the input voltage of 5 V, current consumption of the 150 mA and dimensions of 30 x 30 x 10 mm.
Index: MOD-09872
Index: MOD-09872
Jack 3,5mm stereo female jack - JY039-5P
Jack female 3.5 mm stereo socket. It has pins for the through-hole soldering (THT) on the PCB.
Index: KAB-02734
Index: KAB-02734
8-channel bi-directional logic level converter
The module allows you to exchange data between systems that use the most popular voltages: from 3.3 V to 5.5 V and vice versa. Eight channels allow for connection of various...
Index: MOD-08590
Index: MOD-08590
Potentiometer knob RCL14 red - 6/14mm - 5 pcs.
Knob for rotation potentiometer on axis of 6 mm. The height is 20 mm and the outer diameter is 14 mm. 5 pcs.
Index: MOD-05734
Index: MOD-05734
LED strip RGB WS2812 5050 x 8 LEDs - 53mm - soldered connectors
A strip consisting of 8 individually addressed RGB 8080 LEDs with integrated controller. One microcontroller pin is sufficient to operate the module. The strip is 53 mm...
Index: LED-16152
Index: LED-16152
Speaker MG24-15 0.5W 8Ohm - 24x15x4mm
Speaker power 0.5 W, resistance 8 Ohm, and a size of 24 x 15 x 4 mm.
Index: EAK-03468
Index: EAK-03468
Copper heatsink set for Raspberry Pi 4/3/2/B+/Zero - 8pieces
The set includes two copper heatsinks, which can cool the minicomputer Raspberry Pi 3 B, 2 B, B+ and Zero. They are suitable for chips located on the board and emit the...
Index: DNG-10048
Index: DNG-10048
Raspberry Pi tape - camera 100cm 15 wires 1mm raster
Tape with a length of 100 cm connecting the minicomputer Raspberry Pi with the dedicated camera. The connector has 15 veins, pitch is 1 mm.
Index: RPI-03949
Index: RPI-03949
Nylon Distance Bolts 8mm - 10pcs.
Plastic distance piece with a length of 8 mm, external diameter 6.3 mm and internal diameter 3.5 mm. Price per 10 pieces. Elements of this type mounted on the screw, allow to...
Index: MTN-04227
Index: MTN-04227
Index: AKC-01649
Module with USB socket And soldered connectors
A module with a USB A socket for connecting a type A USB plug to any circuit. Standard 2.54 mm pin raster , allows direct connection of the module to the contact plate or...
Index: MOD-16154
Index: MOD-16154
Female pin for case raster 2.5mm - 10pcs
A set of ten female pins for the socket's case, pitch of 2.50 mm.
Index: KAB-06954
Index: KAB-06954