- Sale
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
Analog time programmer TS-WF1 - with Schuko socket - Kemot URZ2001-5
Index: LEC-24140
- Reduced price
- Sale
- Reduced price
- Sale
ELECTRONICS - Strona 70
Loading...
Tact Switch 6x6mm/4,3mm SMD - 5pcs.
A small monostable button mounted in a surface way - SMD with the size: 6x6 mm, height: 4.3 mm. The price is for 5 pieces.
Index: SWT-00379
Index: SWT-00379
Microcontroller AVR - ATtiny13A-PU
Atmel Microcontroller AVR in 8-leg DIP case. Voltage supply range from 1.8 V to 5.5 V, with a clock signal frequency to 20 MHz, 1 KB Flash, 64 B RAM, 64 B EEPROM.
Index: UCC-00664
Index: UCC-00664
AVR microcontroller - ATmega328P-AU SMD
Microcontroller AVR from Atmel in a case soldered on the surface (SMD was also used in the popular Arduino module).
Index: UCC-01836
Index: UCC-01836
RC Switch with MOSFET 30V/15A transistor - Pololu 2803
The module processes the RC signals to a digital on/off statuses. It has a built-in MOSFET transistor which allows for the control of devices with current consumption of up to...
Index: PLL-01931
Index: PLL-01931
The keyboard has numbers from 0 to 9 and the signs: * and #. The buttons are connected into a matrix so for the detection of 12 buttons, you need only 7 pins of the...
Index: SPF-02202
Index: SPF-02202
Peltier cell TEC1-12706 12V/6A
The chilling cell used, for example, in portable refrigerators. It's supplied with the voltage of up to 12 V, it consumes up to 6 A current. Board sizes - 40 x 40 x 4 mm.
Index: MOD-02613
Index: MOD-02613
Smoke and flammable gas sensor MQ-2 - semiconductor - blue module
Module with smoke and flammable gas MQ-2 detector with the goldpin pins, pitch of 2.54 mm. It is powered with the voltage of 5 V. It has digital and analog output, making it...
Index: MOD-03027
Index: MOD-03027
Holding solenoid 12V 2,5W 2kgf
The holding electromagnet powered with the voltage of 12 V with a power of 2.5 W. It holds a weight of 2 kg in standard earth acceleration of 9.8 m/s2. Case diameter is 20 mm,...
Index: MOD-03095
Index: MOD-03095
Magnetic sensor to open door/window - reed contact CMD20
Wired proximity sensor activated magnetically. The device is used to determine the position of doors and windows. Case dimensions - 20 x 64 mm.
Index: SES-03129
Index: SES-03129
Round switch mounted on the cable. Diameter is equal to 70 mm and height is 28.8 mm. It provides you the power off without having to remove the UPS from the socket.
Index: KAB-03919
Index: KAB-03919
Dust sensor / particle concentration - GP2Y1010AU0F air purity monitor + module - Waveshare 10500
Dust sensor allows you to monitor the purity of the air. It is equipped with the Sharp GP2Y1010AU0F sensor, it allows to detect particles with diameter of more than 0.8 µm, for...
Index: WSR-04480
Index: WSR-04480
D-SUB 25 male plug is used, for example, as the connector of the parallel LPT port.
Index: KAB-04998
Index: KAB-04998
Arcade Push Button 3,3cm black case - blue with backlight
A push button with an outside diameter of 33 mm and a height of 60 mm, with a built-in LED that illuminates the dome in blue. A simple limit switch is included with the button.
Index: SWT-05281
Index: SWT-05281
WTA 5x20mm fuse - 250V / 10A - 10pcs
Fuse type 5 x 20 mm working with voltage up to 250 V which allows up to 10 A current flow. Price per 10 pieces.
Index: KAB-05467
Index: KAB-05467
Pipe end insulated 4.0/12mm - 10pcs
Sleeve end for multiwire copper cables. Maximum vein's cross-section is 4.0 mm2, sleeve length is 12 mm. Price is for 10 pieces.
Index: KAB-05833
Index: KAB-05833
Rotary switch 3-position 4 circuits - 60mm
Rotary switch, 3-state for the case, equipped with 16 contacts. The total height is 60 mm.
Index: UCC-06152
Index: UCC-06152
Eight-segment display x3 - 14mm red - common anode
Triple 8-segment display allows you to display three digits along with points and some letters.
Index: LCD-06447
Index: LCD-06447
RPi Relay Board - 3 relays - cap for Raspberry Pi - Waveshare 11638
Cap fitted to connectors of Raspberry Pi GPIO in version 4B, 3B+, 3B, 2B, B+ and A+, with three relays with parameters of 250 V / 10 A. Board has a screw connector....
Index: WSR-06804
Index: WSR-06804
High temperatura probe PT1000 - 1kΩ 6x50mm metal braid
Waterproof analog high temperature sensor operating from -30 °C to 500 °C. The output is a temperature dependent resistance. The length of the probe is 50 mm.
Index: SES-07472
Index: SES-07472
Sealed cable gland with a thread of 20 mm. Prevents the cable passing through the body wall from scratching. Designed for wires with diameters from 7 mm to 12 mm.
Index: KAB-07511
Index: KAB-07511
OdSeven Camera HD IR-CUT OV5647 5Mpx - day/night IR for Raspberry Pi + IR modules
Module with the camera, connected to a dedicated connector of minicomputer Raspberry Pi, version 4, 3, 2, B+, A+. It has a matrix CCD 1/4" with the resolution of 5 Mpx,...
Index: ODS-07599
Index: ODS-07599
DFRobot Gravity - digital blue button
Digital monostable switch with 3-pin connector. It is powered with the voltage from 3.3 V to 5 V, it works with Arduino modules.
Index: DFR-08045
Index: DFR-08045
Adapter DC 5,5/2,1mm - 3 plugs
Splitter with one female socket 5.5 / 2.1 mm and three male plugs 5.5 / 2.1 mm. Can be used, among other things, to power multiple LED strips from one power supply.
Index: KAB-08132
Index: KAB-08132
TPL5110 Low Power Timer Breakout - Adafruit 3435
Module that allows to reduce the energy consumption of any project because of its cyclic turning off and on. It works with delays from the "every 100 ms" to "every 2 hours". It...
Index: ADA-08442
Index: ADA-08442