Batteries require different types of contact elements to connect their findings with with rated for electronics. In some cases it is enough to contact with the flexible sheet metal, soldered directly on the PCB of the device. However, in many cases, the specialized connectors that provide not only the necessary energy efficiency as well as reliability of the connection and adequate protection against accidental short circuit. In this category you will find all sorts of connectors for batteries and a separate battery.
- New
- Reduced price
- Promotion
- On sale!
- Promotion
Connector for strips LED SMD 3528 8mm 2 pin with two clamps - 16,8cm
Index: MOD-09674
- On sale!
- Promotion
- Reduced price
- Promotion
Batteries connectors
Loading...
Crocodile cables - 50cm, colorful 10pcs
Set of 10 colorful wires ended, on both sides, with connectors of crocodile type. Length of one element is 50 cm.
Index: KAB-03783
Index: KAB-03783
Power supply wire with JST - BEC plug
Double silicone cable ended with a plug of type "BEC", is used to connect power from the rechargeable batteries and batteries.
Index: KAB-01442
Index: KAB-01442
Adapter plug DC 5.5 / 2.1 - plug connector 6F22 battery 9V
Adapter that allows you to connect a popular 9 V 6F22 battery for DC 5.5/2.1 mm connectors used in development sets, for example, Arduino.
Index: AKC-01369
Index: AKC-01369
2-vein connecting cable is ended on one side with JST connector, pitch of 2 mm, on the other, with cables with the removed insulation. The length is about 10 cm.
Index: SEE-04394
Index: SEE-04394
Battery clip 9V (6F22) with cable
A connector to facilitate the connection of popular 9-volt (6F22) batteries with cables with insulation removed at the ends.
Index: AKC-05502
Index: AKC-05502
Power wires with JST - BEC socket
Double silicone cable completed with a slotof type "BEC", it is used to connect power from the rechargeable batterries and batteries.
Index: KAB-01340
Index: KAB-01340
JST 2-pin plug straight, 2,0mm raster with cable
2-pin connector, type JST-PH with the cable with the length of 10 cm. The pitch is 2.0 mm.
Index: DNG-06563
Index: DNG-06563
Straight 2-pin Molex 51005 plug, 2mm raster with wire
2-pin, female connector Molex 51005 type with the cable with the length of 15 cm. Pitch is equal to 2 mm.
Index: KAB-07451
Index: KAB-07451
Pair of JST - BEC connectors for Li-Pol batteries
The set includes a pair of BEC (JST) connectors - socket, plug and plates.
Index: AKC-02865
Index: AKC-02865
Molex 51005 2-pin cable 2mm male
2-pin male connector, type Molex 51005 with the cable with the length of 15 cm. Pitch is equal to 2 mm.
Index: MOD-07452
Index: MOD-07452
BEC connector (JST) mainly used for connections on battery cables, e.g. lithium polymer batteries.
Index: UCC-06098
Index: UCC-06098
JST - BEC socket for Li-Pol batteries
BEC (JST) slot is mainly used for connections on the cables powering the rechargeable battery, for example, lithium-polymer.
Index: UCC-01320
Index: UCC-01320
Set of 5 wires with 2pin female plug, 2,54mm raster - 40cm
Cable 40 cm long on one side ended with 2 pin female plug - raster 2.54 mm on the other side with free wires for soldering. Set of five pieces.
Index: KAB-02704
Index: KAB-02704
Electric case 2pin 10A/250V in case with strain relief boots
The 12-pin electric cube allows you to connect the wires with a voltage of 250 V with the flow of current up to 20 A. Connection pitch is 10.5 mm, the maximum diameter of...
Index: KAB-08074
Index: KAB-08074
Electric cube self-locking 2 pin 2mm 10A/380V - 10 pcs
The 2-pin electric self-locking cube allows you to connect the wires with a voltage of 380 V with the flow of current up to 10 A. Connection pitch is 10 mm, the maximum...
Index: KAB-03717
Index: KAB-03717
A pair of micro T-DEAN connectors
The kit contains a pair of micro DEAN connectors - socket and plug.
Index: KAB-02719
Index: KAB-02719
DC socket 5,5x2,1mm with 1 m wire
DC φ5.5 x 2.1 mm slot (for AC adapter) with 2-vein cable with the length of 1 m with the removed insulation at the end.
Index: KAB-03507
Index: KAB-03507
XT60 type socket. The connector is used, among others for connections with li-pol packages. The cable length is 10 cm.
Index: KAB-07517
Index: KAB-07517
The kit contains a pair of DEAN connectors - socket and plug.
Index: KAB-01339
Index: KAB-01339
Electric cube 12pin 6mm 5A/250V
The 12-pin electric cube allows you to connect the wires with a voltage of 250 V with the flow of current up to 5 A. Connection pitch is 8.5 mm, the maximum diameter of the...
Index: KAB-03718
Index: KAB-03718
Electric cube 12pin 4mm 3A/250V
The 12-pin electric cube allows you to connect the wires with a voltage of 250 V with the flow of current up to 3 A. Connection pitch is 8 mm, the maximum diameter of the cable...
Index: KAB-06894
Index: KAB-06894
Clip for 9V battery with cable - 15cm
Connector for easy connection of popular 9 V (6F22) batteries with stripped cable ends.
Index: AKC-00416
Index: AKC-00416
Electric cube 12pin 12mm 20A/250V
The 12-pin electric cube allows you to connect the wires with a voltage of 250 V with the flow of current up to 20 A. Connection pitch is 10.5 mm, the maximum diameter of the...
Index: KAB-06896
Index: KAB-06896
Crocodile wire rectangle - 50cm colored 5pcs
Set of 5 colored wires ended from both sides with the big connector of crocodile type. Length of the single element is 50 cm.
Index: KAB-04858
Index: KAB-04858
Clips for battery 6F22
Popular batteries with 6F22 9 volt and has multiple levels prostopadłościennej case with radiators snaps, especially readily applied in multimetrach, various kinds of measuring non-electrical quantities (e.g., pirometrach), as well as many control panels of equipment for television and radio. To connect this type of battery electronics can be used plates that interact with correspondingly designed seat in the housing of the device, but much more frequently applied to the latch compatible with the radiator wires. In our offer you will find such connectors for batteries, battery 9 V (called colloquially "kijankami"), as with the wires for soldering, as with all DC plug 5,5/2,1 mm.
Connectors for RC batteries (standard JST)
In the case of packages of food-models with remote control and some mobile devices, love to use JST connectors. They have a shape close to the connectors "like a man" -women's BLS (compatible with goldpinami), but their design is more complex than in the case of simple connectors and sockets. The main difference is the body shape of the connector, when connected to the connector, at considerable length hidden in his niche. Due to the fact that the contacts are well insulated from external conditions and the built-in latch securely attached the two parts of the connector. This type of connectors for batteries used to connect power supply, for example, modules and drives. Provide a fast and reliable connection and disconnection that matters when replacing a package or patch in the model design in the field.
Cubes and quick connect power
In our offer you will find also a number of cubes electrical installation and fittings, ideal as connectors for batteries in cases where the leads of the package or a link to combine with the existing wiring of the device. Special attention should be paid to the orange cube switching that can carry a load of about 32 A. applications of modeling and robotics, should also pay attention to the XT60 connectors – power connectors for the battery (particularly lithium), offering a current load of approximately 65 A. these Connectors are a great solution for use with large packages of Li-Ion and Li-Po.