- New
- New
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
Raspberry Pi GPIO extensions - Strona 3
Loading...
E-paper E-Ink 7.5'' 800x480px - display with HAT pad for Raspberry Pi - Waveshare 13504
7.5" E-paper display in E-Ink technology with a resolution of 800 x 480 px . Works with a voltage of 3.3 V and 5 V. Intended for use with the main module. Communicates...
Index: WSR-09891
Index: WSR-09891
Cap HAT GSM / GPRS / GNSS / Bluetooth for Raspberry Pi - Waveshare 13460
Cap adjusted to the GPIO connectors for Raspberry Pi 3 / 2 / Zero / Zero, which provides connection through standard GSM, GPRS, GPS and Bluetooth. Allows voice chat, to send...
Index: WSR-09893
Index: WSR-09893
Blinkt! 8x adressed LED RGB - Raspberry Pi extension
Blinkt! is a shield for the Raspberry Pi mounted on GPIO connector of the minicomputer. Board has eight individually addressed RGB LEDs, ideal for adding a visual notification...
Index: PIM-10620
Index: PIM-10620
The module with the HAT shield for Raspberry Pi is equipped with eight HLS8L relays with a coil powered with a voltage of 5 V along with optoelectronic insulation. The system...
Index: WSR-13301
Index: WSR-13301
UPS HAT for Raspberry Pi Zero - Waveshare 19739
The UPS overlay provides uninterrupted power to the Raspberry Pi Zero minicomputer, thanks to the Li-Pol battery, when the power from the Raspberry Pi Zero power supply...
Index: WSR-19717
Index: WSR-19717
ePaper Breakout Board - ePaper display driver for Seeed Xiao - Seeedstudio 105990172
ePaper Breakout Board is an extension designed for the Seeed Xiao series , enabling seamless control of ePaper displays . It has a 24-pin FPC connector and an additional...
Index: SEE-24130
Index: SEE-24130
LiPo SHIM - power supply extension for Raspberry Pi
LiPo PWM is an extension for Raspberry Pi mounted directly on the GPIO connector of the minicomputer. The device has JST 2.0 mm 2-pin connectors for connecting the...
Index: PIM-10634
Index: PIM-10634
Cytron HAT-MDD10 - two channel DC engine driver 24V / 10A - overlay for Raspberry Pi
Shield with dual-channel driver of motors operating with a voltage from 6 V to 24 V and current up to 10 A per channel (max. 30). The system can be connected directly with the...
Index: CTN-12413
Index: CTN-12413
Serial Expansion HAT - I2C, UART, GPIO for Raspberry Pi - Waveshare 15667
Shield with system SC16IS752 expanding the minicomputer Raspberry Pi with additional two communication channels of UART and GPIO ports programmable via I2C.
Index: WSR-13469
Index: WSR-13469
The cap for the Raspberry Pi containing 3-axis gyroscope, accelerometer, magnetometer and a barometer, temperature and humidity sensor, the LED matrix and a small joystick. The...
Index: RPI-04585
Index: RPI-04585
RPi Relay Board - 3 relays - cap for Raspberry Pi - Waveshare 11638
Cap fitted to connectors of Raspberry Pi GPIO in version 4B, 3B+, 3B, 2B, B+ and A+, with three relays with parameters of 250 V / 10 A. Board has a screw connector....
Index: WSR-06804
Index: WSR-06804
RGB LED Hat for Raspberry Pi 3/2/Zero - Waveshare 12725
Shield for the Raspberry Pi containing the LED matrix 8 x 4 consisting of WS2812B LEDs. Each LED can be individually set. The device has dimensions of 65 x 30 mm, it works with...
Index: WSR-08869
Index: WSR-08869
Dual channel DC motor driver, I2C interface - HAT for Raspberry Pi - Waveshare 15364
HAT shield for Raspberry Pi 3 / 2 / B+ / Zero / Zero W enabling the control of two DC motors using the I2C interface. It can control simultaneously the two DC motors. A maximum...
Index: WSR-13304
Index: WSR-13304
Pirate Audio 3W Stereo Amp - 3W amplifier with display - AMP for Raspberry Pi - Pimoroni PIM484
Overlay with two DAC chips for the Raspberry Pi minicomputer. The board is equipped with a 3 W stereo audio output , two speaker terminals and a 1.3 " colour IPS display ....
Index: PIM-15898
Index: PIM-15898
Audio Amp SHIM - 3W Mono Amplifier for Raspberry Pi - Pimoroni PIM541
A small SHIM overlay for Raspberry Pi minicomputers made by Pimoroni company. The module acts as a 3 W mono amplifier. There is a terminal connector on the board to connect...
Index: PIM-19067
Index: PIM-19067
Power over Ethernet HAT (D) is an overlay module designed for Raspberry Pi minicomputer 3B+ and 4B versions. Small size and specially designed construction allows to use it also...
Index: WSR-19593
Index: WSR-19593
SIM868 GSM/GPRS/GNSS + Bluetooth - communication module for Raspberry Pi Pico - Waveshare 20268
CAN FD Expansion HAT is a CAN bus expansion overlay produced by Waveshare. It supports the original CAN 2.0 protocol and the CAN FD expansion with higher data throughput....
Index: WSR-20081
Index: WSR-20081
Nano Base Board (B) for Raspberry Pi Compute Module 4, Same Size as the CM4
Expander of pins in the form of an overlay for the Raspberry Pi Compute Module 4 Lite / eMMC computing module . It has been equipped with special connectors, thanks to...
Index: WSR-21612
Index: WSR-21612
PCF8575 - GPIO pin expander - I2C - STEMMA QT / Qwiic - Adafruit 5611
Adafruit pin expander equipped with PCF8575 chip. It has as many as 16 pins of GPIO inputs / outputs , thanks to which it increases the design possibilities of the modules...
Index: ADA-22192
Index: ADA-22192
THT 26pin prototype board with screw connectors for Raspberry Pi
Board allows independent creation of electronic circuits. Connected directly to the GPIO pins of the Raspberry Pi minicomputer. It has soldered screw connections and goldpin...
Index: MOD-05662
Index: MOD-05662
MCP23008-E/P - 8-channel I2C pin expander
The system allows to increase the number of pins (up to 8) of a microcontroller (including minicomputer Raspberry Pi). It communicates with the central unit via the I2C bus...
Index: UCC-06505
Index: UCC-06505
Argon Fan HAT v1.5 - module with fan for Raspberry Pi
Overlay with 40 x 40 mm fan for Raspberry Pi 4B / 3B+ / 3B. After downloading the script from the manufacturer's website, you can adjust the fan speed . There is a power /...
Index: ARG-15394
Index: ARG-15394
IO Expansion HAT for Raspberry Pi 4B/3B+/3B/2B - DFRobot DFR0566
Overlay for Raspberry Pi mini-computer in 4B / 3B+ / 3B / 2B version, where individual sections of Raspberry Pi outputs have been separated , such as: digital, analog, PWM,...
Index: DFR-15713
Index: DFR-15713
Mini PoE Hat - PoE module for Raspberry Pi 4B/3B+/3B + fan - UCTRONICS U6110
A cap to power Raspberry Pi minicomputers using Power over Ethernet technology. This solution allows you to power the minicomputer using a network cable with an RJ-45...
Index: ACM-16898
Index: ACM-16898