- New
- Reduced price
- Sale
Raspberry Pi GPIO extensions - Strona 4
Loading...
M3H550 - triple motor controller DC 22V/1,7A - for Raspberry Pi - soldered - Pololu 5071
A shield for Raspberry Pi that allows you to control three motors powered by voltage from 1.8 V to 22 V. It uses the I2C interface to communicate with the minicomputer....
Index: PLL-23647
Index: PLL-23647
- Reduced price
- SPECIAL OFFERS
IR Hat + remote control - Raspberry Pi overlay
Shield which makes it possible to remotely switch on / off the minicomputer Raspberry Pi. The kit also includes a remote control.
Index: MOD-09868
Index: MOD-09868
- Sale
- SPECIAL OFFERS
HiFiBerry DAC+ DSP - sound card for Raspberry Pi 4B/3B+/3/2/B+/A+
Shield, type Hat for Raspberry, version 4B, 3B+, 3B, 2B, A+, B, Zero with 4-channel amplifier Beocreate and the digital signal DSP processor. It is used in the device of the...
Index: RHF-13084
Index: RHF-13084
- Sale
- SPECIAL OFFERS
Expansion Kit - extension Raspberry Pi to breadboard + tape + breadboard - Iduino RA028
A module that allows the GPIO Raspberry Pi pins to be led out onto the contact plate using IDC tape. The kit also includes a contact plate and 40-pin tape.
Index: OST-14267
Index: OST-14267
Unicorn HAT Mini - LED RGB matrix - for Raspberry Pi - Pimoroni PIM498
Overlay for Raspberry Pi made by Pimoroni company. On the board there are 119 RGB LEDs in the form of 17 x 7 matrix . Thanks to the HT16D35A chip it is possible to...
Index: PIM-19068
Index: PIM-19068
GPIO I2C pin expander and LED driver - AW9523 - STEMMA AT / Qwiic - Adafruit 4886
GPIO pinout expander and LED driver . Equipped with AW9523 chip, provides up to 16 additional GPIO inputs / outputs . Uses I2C bus to communicate with connected...
Index: ADA-19252
Index: ADA-19252
IO pin expander - extension cap for Raspberry Pi 3 / 4 / 400
An expansion overlay for the Raspberry Pi in the form of an IO pin expander . It is compatible with Raspberry Pi version 3 / 4 and 400. On the board all the leads are...
Index: DFR-20073
Index: DFR-20073
Raspberry Pi Build HAT - LEGO motors and sensors driver - RP2040
A LEGO motor and sensor controller made by the Raspberry Pi Foundation. Based on the Raspberry Pi RP2040 microcontroller, this controller for four LEGO motors allows you to...
Index: RPI-20291
Index: RPI-20291
- Reduced price
- SPECIAL OFFERS
SparkFun Qwiic SHIM for Raspberry Pi - SparkFun DEV-15794
SparkFun Qwiic SHIM is a small module applied to the GPIO pins of Raspbery, with which you can easily equip a minicomputer with a Qwiic connector. The module is plugged...
Index: SPF-21163
Index: SPF-21163
Inventor HAT Mini for Raspberry Pi - PiMoroni PIM672
Inventor HAT Mini is perfect for creating robots, props, moving sculptures and other dynamic Raspberry Pi- based projects. The overlay allows you to connect two motors, four...
Index: PIM-23498
Index: PIM-23498
PCIe to M.2 adapter for Raspberry Pi 5 - Waveshare 26583
A dedicated adapter enabling the connection of NVMe M.2 drives to the Raspberry Pi 5 minicomputer, increasing its performance. The adapter is compatible with drives of...
Index: WSR-24483
Index: WSR-24483
Logic level converter I2C PCA9306 - SparkFun BOB-15439
The module allows bidirectional communication between circuits using different voltage levels for I2C and SMBus. PCA9306 converts voltages from lower range from 1.2 V to 3.3 V...
Index: SPF-01709
Index: SPF-01709
TXB0108 - two-way, 8-channel logic converter - Adafruit 395
The module is based on a TXB0108 system, it allows you to exchange data between systems that use the most popular voltage levels: 3.3 V and 5V. It has eight channels, it...
Index: ADA-02468
Index: ADA-02468
ADS1015 - ADC 12-bit 4-channel I2C converter - Adafruit 1083
Module with analog-to-digital converter with 12-bit accuracy. Operates at speed up to 3300 samples per second. Has the ability to change the amplification up to 16 x. It is...
Index: ADA-02618
Index: ADA-02618
Ultimate GPS Hat + RTC for Raspberry Pi A+/B+/2/3/4 - Adafruit 2324
Do you want to know where your Raspberry Pi is at any time of the day or night? This shield allows you to read the actual time and position with a frequency of 10 Hz using a...
Index: ADA-03284
Index: ADA-03284
- Sale
- SPECIAL OFFERS
MAX98357A decoder stereo DAC I2S - SparkFun DEV-14809
The stereo decoder's module DAC to communicate through the I2S interface. Built-in class D amplifier can provide up to 3.2 W of power to the speakers or headphones with...
Index: SPF-13062
Index: SPF-13062
UPS HAT for Raspberry Pi Zero - DFRobot DFR0528
A cap designed for the Raspberry Pi Zero , serving as an emergency power supply in the event of a mains power failure. The module is also compatible with other versions of...
Index: DFR-15714
Index: DFR-15714
Trim UPS for Raspberry Pi DFRobot DFR0494
A cap designed for the Raspberry Pi 3B/2B/B+, serving as an emergency power supply in case of mains power failure . The HAT UPS will power the device for a certain period of...
Index: DFR-16434
Index: DFR-16434
PoE Ethernet / USB HUB HAT for Raspberry Pi Zero - Waveshare 19635
An overlay that combines the function of a USB hub and a PoE power supply. Created by Waveshare module based on RTL8152B chip, extends functionality of Raspberry Pi Zero by 3...
Index: WSR-20112
Index: WSR-20112
Dual-channel RS485 Expansion Hat - for Raspberry Pi 4B - DFRobot DFR0824
Dual-channel RS485 Expansion Hat is an overlay designed for the Raspberry Pi 4B minicomputer. It was designed to extend the functionality of the module with RS485...
Index: DFR-22929
Index: DFR-22929
M3H550 - triple motor controller DC 22V/1,7A - for Raspberry Pi - Pololu 5072
A shield for Raspberry Pi that allows you to control three motors powered by voltage from 1.8 V to 22 V. It uses the I2C interface to communicate with the minicomputer....
Index: PLL-23646
Index: PLL-23646
- Sale
- SPECIAL OFFERS
Raspberry Pi AI HAT+ is an extension of the Raspberry Pi 5 with the Hailo AI accelerator, which enables easy, cost-effective and energy-efficient integration of advanced...
Index: RPI-25673
Index: RPI-25673
Mini Kit DC and stepper motor driver TB6612 - Motor Hat for Raspberry Pi - Adafruit 2348
Shield for Raspberry Pi, version A+, B+ and 2 to control four DC motors (13.5 V/1.2 A) or two stepper motors. It communicates through interface I2, using only two lines of...
Index: ADA-03401
Index: ADA-03401
MSX Proto Hat for Raspberry Pi 4B/3B+/3B/2B
Board allows for self-creation of electronic circuits. It is connected directly to the GPIO pins of the Raspberry Pi minicomputer, version 4B / 3B+ / 3B / 2B.
Index: MSX-04552
Index: MSX-04552