- New
- Sale
- Sale
- Reduced price
- Sale
Raspberry Pi GPIO extensions - Strona 2
Loading...
WIZnet Ethernet HAT - W5100S - overlay for Raspberry Pi Pico - WIZnet
Trim for Raspberry Pi Pico equipped with the Ethernet TCP/IP W5100S system, which provides Internet connectivity via the Ethernet connector. The board supports wired Internet...
Index: WIZ-22395
Index: WIZ-22395
Logic level bi-directional converter, 4-channel - Pololu 2595
Miniature (13 x 10 mm). the module allows to exchange data between systems that use the most popular voltage levels ranging from 1.5 V to 18 V and Vice versa. Four channels to...
Index: PLL-02523
Index: PLL-02523
LTE GPS HAT - LTE / GPRS / GPS SIM7600E-H - for Raspberry 4B/3B+/3B/2B/Zero - Waveshare 14952
Shield for Raspberry Pi that allows you to send text messages and create calls in the GSM network. It also has a GPS module. It supports LTE CAT4 up to 150 Mbps. It...
Index: WSR-12533
Index: WSR-12533
Grove - Base Hat for Raspberry Pi - shield for Raspberry Pi 4B/3B+/3B
Overlay for Raspberry Pi 4B / 3B+ / 3B based STM32 microcontroller with 12-bit ADC, with Grove connectors, allows the connection of sensors and modules from the Grove...
Index: SEE-15458
Index: SEE-15458
Uninterruptible power supply UPS - Power adapter for Raspberry Pi - 5 V - Waveshare 18306
UPS power supply in the form of an overlay for Raspberry Pi , which brings extra power to the module in case of power failure or while traveling. It is powered by two 18650...
Index: WSR-19046
Index: WSR-19046
Argon Neo 5 M.2 NVMe PCIe expansion board - for Raspberry Pi 5
Argon Neo 5 M.2 is an expansion board for Raspberry Pi 5 for owners of the Argon Neo 5 housing, which allows you to boot the minicomputer system using an M.2 NVMe SSD...
Index: ARG-24844
Index: ARG-24844
HiFiBerry DAC+ RCA standard - sound card for Raspberry Pi 4B/3B+/3/2/B+/A+/Zero
Shield, type Hat for Raspberry, version 4B, 3B+, 3B, 2B, A+, B, Zero with RCA connectors. It is used in the device of high-quality, DAC Burr-Brown chip has a resolution of...
Index: RHF-04875
Index: RHF-04875
- Reduced price
- SPECIAL OFFERS
Shield for Raspberry Pi with e-paper display of 2.13 " with a resolution of 250 x 122 px. It is connected directly to GPIO pins.
Index: WSR-09097
Index: WSR-09097
Extension to Compute Module 4 in the form of an extended expander . The board has a number of useful interfaces and a basket for three batteries, which enables wireless...
Index: WSR-21617
Index: WSR-21617
HiFiBerry DAC2 ADC Pro - sound card for Raspberry Pi
HiFiBerry DAC2 ADC Pro is a professional sound card for Raspberry Pi , combining a high-end digital-to-analog converter (DAC) and analog-to-digital converter (ADC) . It...
Index: RHF-25546
Index: RHF-25546
HiFiBerry DAC2 Pro - sound card for Raspberry Pi 4B/3B+/3B
High quality sound card with digital-analogue and analogue-digital converter for Raspberry Pi 4B/3B+/3B. It is equipped with a Burr-Brown 192 kHz / 24-bit converter. On the...
Index: RHF-18129
Index: RHF-18129
Logic level converter 3,3V / 5V - I2C UART SPI
The module allows to exchange data between systems that use two popular voltages: 3.3 V and 5 V. It provides connection of interfaces: UART, SPI and I2C.
Index: MOD-01513
Index: MOD-01513
RPi Relay Board (B) IC Test Board - Waveshare 15275
Shield for Raspberry Pi 3 / 2 / B+ / Zero / Zero W enabling the control of up to 16 servos. It communicates via I2C interface and is based on PCA9685 system.
Index: WSR-13309
Index: WSR-13309
The module enables easy connection of all GPIO Raspberry minicomputer outputs in versions 4, 3, 2 and B+ with any contact plate without the need for soldering. The chip is...
Index: ADA-02781
Index: ADA-02781
Proto Hat to Raspberry Pi 4B/3B+/3B/2B
Board allows for independent creation of electronic circuits. It is connected directly to the GPIO pins of the Raspberry Pi minicomputer, version 4B / 3B+ / 3B / 2B.
Index: MOD-09422
Index: MOD-09422
HiFiBerry DAC+ ADC Pro - sound card for Raspberry Pi 4B/3B+/3B
Sound card in the form of a 40-pin overlay for the Raspberry Pi minicomputer version 4B / 3B+ / 3B and above. Overlay powered directly from the minicomputer. It is equipped...
Index: RHF-16965
Index: RHF-16965
PCF8591 - A/D and D/A converter, 8-bit I2C v2
Module with A/D converter - 4 channels and D/A - 1 output. It works with voltage from 2.5 V to 6.0 V, and communicates over I2C. The board also contains: potentiometer,...
Index: MOD-02632
Index: MOD-02632
MCP3424 - ADC 18-bit 4-channel I2C converter
Module with analog-digital converter, delta-sigma type with 18-bit precision. It is equipped with four channels with differential inputs. It works at speed of up to 240 samples...
Index: DFR-03036
Index: DFR-03036
Qwiic HAT for Raspberry Pi - SparkFun DEV-14459
Shield, type HAT for Raspberry Pi, facilitating the connection of modules SparkFun via connectors Qwiic. The shield connects the I2C bus on the Raspberry Pi with connectors Qwic.
Index: SPF-10664
Index: SPF-10664
Raspberry Pi PoE HAT - for Raspberry Pi 4B/3B+ - IEEE 802.3af - Uctronics U6241
Shield for Raspberry Pi working with the use of PoE technology , which allows you to power the raspberries via an Ethernet cable. It complies with the IEEE 802.3af standard....
Index: ACM-21105
Index: ACM-21105
IQaudIO DAC+ - sound card for Raspberry Pi 4B/3B+/3B
The sound card designed for the Raspberry Pi minicomputer provides high quality Full HD 24-bit/192 kHz audio with built-in hardware volume control via the Linux built-in...
Index: RPI-18615
Index: RPI-18615
Ethernet / USB (B) HUB - 3xUSB 1xRJ45 Ethernet - frontend Overlay for Raspberry Pi - Waveshare 20416
Overlay for Raspberry Pi, adding three USB ports and one RJ45 Ethernet port. It has an embedded Ethernet RTL8152B chip. The pogo pin layout allows the overlay to connect...
Index: WSR-20080
Index: WSR-20080
RS232 Pal - two-channel UART to RS232 converter - MAX3232E - Adafruit 5987
The RS232 Pal from Adafruit is a versatile board designed to convert UART voltage levels to RS232 , ideal for working with retro equipment, industrial devices and telecoms....
Index: ADA-25271
Index: ADA-25271
Raspberry Pi SSD Kit 512GB for Raspberry Pi 5
The Raspberry Pi SSD Kit includes a Raspberry Pi M.2 HAT+ and an official Raspberry Pi 512GB NVMe SSD . It's the perfect solution for Raspberry Pi 5 users who want the...
Index: RPI-25484
Index: RPI-25484