- New
- Sale
- Sale
- Reduced price
- Sale
Raspberry Pi GPIO extensions - Strona 4
Loading...
M3H550 - triple motor controller DC 22V/1,7A - for Raspberry Pi - soldered - Pololu 5071
A shield for Raspberry Pi that allows you to control three motors powered by voltage from 1.8 V to 22 V. It uses the I2C interface to communicate with the minicomputer....
Index: PLL-23647
Index: PLL-23647
Expansion Kit - extension Raspberry Pi to breadboard + tape + breadboard - Iduino RA028
A module that allows the GPIO Raspberry Pi pins to be led out onto the contact plate using IDC tape. The kit also includes a contact plate and 40-pin tape.
Index: OST-14267
Index: OST-14267
Enviro pHAT - temperature, pressure, light intensity and proximity sensor - overlay for Raspberry Pi
Enviro pHAT is an overlay for Raspberry Pi with BME280 and LTR-559 sensors allowing to measure temperature, pressure, light level and proximity sensor. Additionally, the...
Index: PIM-16966
Index: PIM-16966
Unicorn HAT Mini - LED RGB matrix - for Raspberry Pi - Pimoroni PIM498
Overlay for Raspberry Pi made by Pimoroni company. On the board there are 119 RGB LEDs in the form of 17 x 7 matrix . Thanks to the HT16D35A chip it is possible to...
Index: PIM-19068
Index: PIM-19068
GPIO I2C pin expander and LED driver - AW9523 - STEMMA AT / Qwiic - Adafruit 4886
GPIO pinout expander and LED driver . Equipped with AW9523 chip, provides up to 16 additional GPIO inputs / outputs . Uses I2C bus to communicate with connected...
Index: ADA-19252
Index: ADA-19252
IO pin expander - extension cap for Raspberry Pi 3 / 4 / 400
An expansion overlay for the Raspberry Pi in the form of an IO pin expander . It is compatible with Raspberry Pi version 3 / 4 and 400. On the board all the leads are...
Index: DFR-20073
Index: DFR-20073
SparkFun Qwiic SHIM for Raspberry Pi - SparkFun DEV-15794
SparkFun Qwiic SHIM is a small module applied to the GPIO pins of Raspbery, with which you can easily equip a minicomputer with a Qwiic connector. The module is plugged...
Index: SPF-21163
Index: SPF-21163
Inventor HAT Mini for Raspberry Pi - PiMoroni PIM672
Inventor HAT Mini is perfect for creating robots, props, moving sculptures and other dynamic Raspberry Pi- based projects. The overlay allows you to connect two motors, four...
Index: PIM-23498
Index: PIM-23498
PCIe to M.2 adapter for Raspberry Pi 5 - Waveshare 26583
A dedicated adapter enabling the connection of NVMe M.2 drives to the Raspberry Pi 5 minicomputer, increasing its performance. The adapter is compatible with drives of...
Index: WSR-24483
Index: WSR-24483
Logic level converter I2C PCA9306 - SparkFun BOB-15439
The module allows bidirectional communication between circuits using different voltage levels for I2C and SMBus. PCA9306 converts voltages from lower range from 1.2 V to 3.3 V...
Index: SPF-01709
Index: SPF-01709
UPS HAT for Raspberry Pi Zero - DFRobot DFR0528
A cap designed for the Raspberry Pi Zero , serving as an emergency power supply in the event of a mains power failure. The module is also compatible with other versions of...
Index: DFR-15714
Index: DFR-15714
Trim UPS for Raspberry Pi DFRobot DFR0494
A cap designed for the Raspberry Pi 3B/2B/B+, serving as an emergency power supply in case of mains power failure . The HAT UPS will power the device for a certain period of...
Index: DFR-16434
Index: DFR-16434
PoE Ethernet / USB HUB HAT for Raspberry Pi Zero - Waveshare 19635
An overlay that combines the function of a USB hub and a PoE power supply. Created by Waveshare module based on RTL8152B chip, extends functionality of Raspberry Pi Zero by 3...
Index: WSR-20112
Index: WSR-20112
Dual-channel RS485 Expansion Hat - for Raspberry Pi 4B - DFRobot DFR0824
Dual-channel RS485 Expansion Hat is an overlay designed for the Raspberry Pi 4B minicomputer. It was designed to extend the functionality of the module with RS485...
Index: DFR-22929
Index: DFR-22929
Raspberry Pi AI HAT+ is an extension of the Raspberry Pi 5 with the Hailo AI accelerator, which enables easy, cost-effective and energy-efficient integration of advanced...
Index: RPI-25673
Index: RPI-25673
Mini Kit DC and stepper motor driver TB6612 - Motor Hat for Raspberry Pi - Adafruit 2348
Shield for Raspberry Pi, version A+, B+ and 2 to control four DC motors (13.5 V/1.2 A) or two stepper motors. It communicates through interface I2, using only two lines of...
Index: ADA-03401
Index: ADA-03401
MSX Proto Hat for Raspberry Pi 4B/3B+/3B/2B
Board allows for self-creation of electronic circuits. It is connected directly to the GPIO pins of the Raspberry Pi minicomputer, version 4B / 3B+ / 3B / 2B.
Index: MSX-04552
Index: MSX-04552
HiFiBerry Digi2 Standard - sound card for Raspberry Pi 4B/3B+/3/2/B+/A+/Zero
A hat-style shield for Raspberry Pi 4B, 3B+, 3B, 2B, A+, B, and Zero with a high-quality S/PDIF interface and optical connector. The chip used in the device has 24-bit...
Index: RHF-04872
Index: RHF-04872
Game HAT for Raspberry Pi - Waveshare 15154
Shield that allows you to create miniconsole for games based on minicomputer Raspberry Pi. The module is equipped with buttons, joystick, IPS 3,5" display, speaker and output...
Index: WSR-13589
Index: WSR-13589
Grove ADS1115 - 4-channel 16-bit ADC for Raspberry Pi - Seeedstudio 103030279
Grove 4-channel 16-bit ADS1115 ADC is an analog-digital converter (ADC) in the form of shield for GPIO connectors of Raspberry Pi. It is 4-channel ADC based on the ADS1115...
Index: SEE-13814
Index: SEE-13814
DC Motor Driver HAT V1.0 - 2-channels motor driver 12V/1,2A - HAT for Raspberry Pi - DFRobot DFR0592
Two-channel DC motor controller TB6612FNG operating with voltage from 7 V to 12 V and continuous current 1.2 A per channel and momentary 2 A. The module in the form of an...
Index: DFR-15298
Index: DFR-15298
SparkFun Qwiic pHAT v2.0 - hat for Raspberry Pi - SparkFun DEV-15945
SparkFun Qwiic pHAT v2.0 HAT shield for Raspberry Pi, manufactured by SparkFun. The pin expander improves the prototyping process by adding four connectors of the Qwiic...
Index: SPF-21165
Index: SPF-21165
Dual-band GPS/RTK L1+L5 module with LC29H(BS) GNSS chip - overlay for Raspberry Pi - Waveshare 25280
Dual-band GPS module with GNSS LC29H(BS) receiver designed for Raspberry Pi and Jetson Nano minicomputers, supporting L1 and L5 bands. It has an RTK (Real Time...
Index: WSR-23874
Index: WSR-23874
Infrared transmitter and receiver module - 940nm + 38kHz - STEMMA JST PH 2mm - Adafruit 5990
Compact module from Adafruit that allows both emission and reception of infrared signals (940nm, 38kHz). Equipped with two high-power LEDs , it supports a range of up to...
Index: ADA-25272
Index: ADA-25272