- Sale
- Sale
- Sale
- Sale
List of products by brand OEM - Strona 11
Loading...
NEMA 23 - Steel L-type Step Motor Mount
Steel bracket for stepper motor NEMA 17. It has slots and mounting holes. The kit does contain munting screws.
Index: NSZ-05407
Index: NSZ-05407
5 mm green LED. Transparent lens. Wavelength: ca. 570 nm. Brightness: approx. 500 mcd. Illumination angle: 40 °. Price for 5 pcs.
Index: LED-04818
Index: LED-04818
Ring LED RGB WS2812B 5050 x 24 diodes - 90mm
A ring of 24 individually addressable 5050 RGB LEDs with integrated driver. One pin of the microcontroller is enough to operate the module. The outer diameter of the circle is...
Index: LED-06246
Index: LED-06246
Power LED Star 3 W LED - neutral white with a heat sink
Power LED neutral white 3 W with a heat sink.
Index: LED-02498
Index: LED-02498
LED Strip SMD3528 IP20 4.8W, 60 LEDs/m, 8mm, cold color - 5m
LED strip powered by a voltage of 12 V with self-adhesive tape. Consumes power: 4.8 W/m, density of 60 diodes per meter. The light color is cold white, protection factor IP20....
Index: LED-05159
Index: LED-05159
Strip LED SMD5050 IP20 14,4W, 60 LED/m, 10mm, natural white - 5m
LED strip powered by a voltage of 12 V with self-adhesive tape. Consumes power: 14.4 W/m, density of 60 diodes per meter. The color of the light is natural white. Protection...
Index: LED-07083
Index: LED-07083
LED strip RGBCW SK6812 - digital, addressed - IP65 60 LED/m, 18W / m, 5V - 5m
Individually addressed RGBCW LEDs placed on a 1 m panel with a density of 60 LEDs per meter. Pixels other than RGB may also emit shades of white, each pixel can emit color from...
Index: DNG-12488
Index: DNG-12488
Connecting cables Male-female 20cm green - 100pcs.
Set of 100 copper connecting wires 26AWG with the length of 20 cm in green color.
Index: DNG-11905
Index: DNG-11905
Breadboard - 3220 holes with power supply connectors
Breadboard has pins that allow to connect and disconnect the power supply in a simple and quick way.
Index: PLY-00609
Index: PLY-00609
Push button 10cm - blue - flat
Big button with an outer diameter of 6 cm with the built-in blue LED illuminating the dome.
Index: DNG-12666
Index: DNG-12666
Eight-segment display - 14mm red - common cathode
Single 8-segment display of digits with points and some characters.
Index: LCD-06448
Index: LCD-06448
M1,6 PH Screws Length: 3mm - 10pcs.
The screw with M1,6 thread with the length of 3 mm. It is made of stainless steel. Head diameter is 3,2 mm and its height is 1.42 mm. The set includes 10 pieces.
Index: NSZ-07448
Index: NSZ-07448
- Sale
Index: NSZ-08085
- Sale
LED diode 5 mm, red. Transparent lens. Wavelength: from 624 to 630 nm. Brightness: approx. 2000 to 2500 mcd. Beam angle: 40 °. Price for 5 pieces.
Index: LED-04817
Index: LED-04817
BLS connector - 1x10 socket - 5pcs.
Socket for BLS type cable, 2.54 mm pitch. The set includes 5 1x10 sockets.
Index: KAB-05205
Index: KAB-05205
- Sale
- SPECIAL OFFERS
BLS connector - 1x16 socket - 5pcs.
Socket for BLS type cable, 2.54 mm pitch. The set includes 5 1x16 sockets.
Index: KAB-05206
Index: KAB-05206
- Sale
- SPECIAL OFFERS
Set of CF THT 1/4W resistors described - 640pcs.
A set of 64 values of 0.25 W threaded resistors with a 5 % tolerance, 10 pieces each. The elements are signed, which makes it easier to find the right value.
Index: PAS-04549
Index: PAS-04549
Touch screen - resistive LCD TFT 3.5 '' 320x240px for Raspberry Pi 4B/3B+/3B - SPI GPIO
Touch screen TFT LCD with a screen diagonal of 3.5 " and resolutions 320 x 480 px . Communication between the minicomputer and the display is done via...
Index: DNG-16726
Index: DNG-16726
Pulling electromagnet 12V 0,6kg
Electromagnet, which after giving a voltage signal of 12 V , allows for linear motion - pulling. The range of the device's pin is 10 mm and its maximum load capacity is 0.6...
Index: DNG-17758
Index: DNG-17758
Heat shrink tube 3.2/1.6 black - 10pcs
Diameter before heat shrink: 3.2 mm, diameter after heat shrink: 1.6 mm. Price for 10 x 1 meter.
Index: NSZ-00088
Index: NSZ-00088
Nozzle cleaning needle 0,5mm - 5 pcs
The device is designed to clean 0.5 mm diameter nozzles used in 3D printers. The needle allows you to easily get rid of the excess filament clogging the nozzle hole, thus...
Index: DNG-17421
Index: DNG-17421
Power LED Star 3 W - white with heat sink
Power LED, cool white, with a capacity of 3 W with heatsink.
Index: LED-02497
Index: LED-02497
Index: LED-00220
Power LED Star 1W - warm white with heat sink
Power LED warm white with power of 1 watt and with a heat sink.
Index: LED-02492
Index: LED-02492