- Sale
- Sale
ELECTRONICS - Strona 114
Loading...
ON-OFF switch monostable - PBW-12BPW - 2A / 250V - flat red
A flat monostable switch with the red backlight. Contact load is 2 A for 250 V.
Index: AKS-10804
Index: AKS-10804
ON-OFF switch monostable - PBW-12BPW - 2A / 250V - green
A salient, monostable switch with the green backlight. Contact load is 2 A for 250 V.
Index: AKS-10807
Index: AKS-10807
ON-OFF switch monostable - PBW-16BPW - 2A 250V - green / red
Monostable salient switch with the green/red backlight. Contact load is 2 A for 250 V.
Index: AKS-10821
Index: AKS-10821
DFRobot Gravity - analogue meter of the sound level
The sound level meter is compatible with Arduino. For measurements, it uses the circuit instrument and the microphone with a low noise level that allows to accurately measure...
Index: DFR-10832
Index: DFR-10832
Feather Huzzah ESP32 - WiFi module, Bluetooth GPIO - soldered connectors - Adafruit 3591
The wi-fi module and Bluetooth, based on the system ESP32. On board is 8 GPIO ports with support for I2C and SPI, analog input and a connector with a 3.7 V lipol battery. It...
Index: ADA-10874
Index: ADA-10874
Ribbon cable 14 colored wires IDC raster 1.27 mm - roll 30.5 m
IDC 14 core ribbon cable. Raster: 1.27 mm. Roll: 30,5 m .
Index: AKS-10948
Index: AKS-10948
DFRobot Gravity - digital crash sensor (left)
The module is equipped with limit switch with lever with roller is designed for Arduino. It is supplied with the voltage of 5 V.
Index: DFR-11265
Index: DFR-11265
DFRobot Gravity - digital crash sensor (right)
The module is equipped with limit switch with lever with roller, it is designed for Arduino. It is powered with the voltage of 5 V.
Index: DFR-11266
Index: DFR-11266
DFRobot Gravity - digital magnetic field sensor
Digital magnetic sensor can detect the magnetic object near it. The supply voltage is from 3.3 V to 5 V.
Index: DFR-11274
Index: DFR-11274
Grove - Button - module with a button
The control module from a Grove series. It has a built-in tact-switch system and pull-down resistor. It communicates with the microcontroller through a digital signal.
Index: SEE-11297
Index: SEE-11297
Grove - SI1151 solar light sensor v2.0
The Grove module based on the SI1151. Multi-channel, digital light sensor to detect visible light and infrared light. It is working with voltage from 3 V to 5.5 V. It...
Index: SEE-11353
Index: SEE-11353
Camera ArduCam Sony IMX219 8MPx CS mount - night with lens LS-1820 and IR-CUT - for Raspberry Pi
Camera module with sensor Sony IMX219 equipped with a lens LS-1820-NOIR, IR-CUT, enabling work in day and night. It connects into a special connector on a minicomputer...
Index: ACM-11697
Index: ACM-11697
Kradex Z128JpH TM ABS-PC plastic case with brass sleeves IP65 - 105x70x40mm light gray-transparent
2-part, airtight, universal case with a seal for the electronic circuit and brass sleeves. It has a transparent cover. External dimensions 105 x 70 x 40 mm.
Index: KDX-11995
Index: KDX-11995
Big Push Button 6cm - blue - inclined
Big flat button with an outer diameter of 6 cm with the built-in LED illuminating the dome.
Index: DNG-12298
Index: DNG-12298
DFRobot Gravity - 2x16 I2C LCD display - gray
LCD display 2x16 characters with backlight in gray color. Communicates via two-wire I2C bus. The set includes a cable adapted to the DFRobot Gravity IO Expansion Shield.
Index: DFR-12364
Index: DFR-12364
Grove - force sensor FSR402 with module - 2kg
Module from the Grove series, is equipped with a sensor of pressure force FSR402. The sensor communicates with the analog voltage signal. It is able to detect a pressure in...
Index: SEE-12595
Index: SEE-12595
Adapter PCB - QFP32/SOP32 to DIP32
Adapter for connecting circuits in QFP/SOP cases to DIP outputs. It also allows you to connect circuits in a breadboard or connect with wires.
Index: AKS-12682
Index: AKS-12682
Power supply for LED Akyga 12V / 2.0A / 25W - waterproof
25 W power supply designed to supply lighting based on LED technology, e.g. tapes, bulbs, panels, RGB controllers and other DC-powered devices with DC 12 V. The voltage can be...
Index: RCO-12863
Index: RCO-12863
Velleman WPSE303 - soil moisture sensor + liquid level sensor - analog
A set of two sensors of: soil moisture and liquid's level. Powered with the voltage of 5 V. T he sensor's output is an analogue voltage which increases its value along with the...
Index: VEL-13019
Index: VEL-13019
Velleman - Step-Up Voltage Regulator with USB socket VMA403 - 5V 0.6 A - 2 pcs.
Step-up converter with 5 V output voltage and 600 mA maximum current. It is powered from 2.5 V to 5 V. The output is a USB socket, so the circuit can be used as a charger...
Index: VEL-13030
Index: VEL-13030
E-Paper Raw Panel Driver Shield - Shield for e-Paper Display for Arduino - SPI - Waveshare 15082
Universal shield for connection of displays e-Paper for modules of Arduino or Nucleo. For communication, it uses SPI interface. It works with a voltage of 3.3 V and 5 V.
Index: WSR-13460
Index: WSR-13460
Grove - laser dust sensor / air quality PM2.5 (HM3301) - 5V
Grove Laser PM2.5 Sensor (HM3301) is a new generation of the laser sensor of dust / air quality, which in real time, allows for monitoring of air quality. It is e quipped with...
Index: SEE-13812
Index: SEE-13812
DFRobot Gravity URM09 - ultrasonic distance sensor 2-500cm and temperature sensor I2C
Module with URM09 ultrasonic sensor and three selectable measurement ranges, from 2 to 150 / 300 / 500 cm. It also allows temperature measurement. The supply voltage is from...
Index: DFR-14048
Index: DFR-14048
VCNL4040 - Proximity Sensor Breakout - 20cm (Qwiic) - SparkFun SEN-15177
A digital sensor that combines the ability to measure proximity IR and measure the intensity of ambient light. The module allows to detect obstacles in the range of 0 to 20 cm....
Index: SPF-14071
Index: SPF-14071