ELECTRONICS - Strona 189
Inveo LanTick Pro PE-2-2 - IoT relay module
Inveo modules allow remote control of devices via Internet. It has 2 relay outputs of 250V and 2 binary inputs operating in counter mode. The module is controlled through the...I2C / UART distance and gesture sensor - 30cm - SparkFun SEN-13162
Module with sensor which enables determination of the distance of the object in two axes X and Z, and hand gestures. With this sensor, you can control the device, for example,...- On sale!
- Promotion
Module RTC DS1307 I2C - real time clock
Module with real time clock and backup battery power. It allows you to read the time in hours, minutes, and seconds, and dates: month, day, year. The device is based on the...ArduCam Camera Sony IMX219 8MPx CS mount - for Raspberry Pi
Camera module with sensor Sony IMX219 equipped with a lens HX-27227 M12x0.5, with the following parameters: focal length 4.0 mm, angle 93 °, aperture of 1.4, the 1/2,5 format....DFRobot Gravity - 2x16 I2C LCD display with RGB backlight - for Arduino
LCD display 2x16 characters with backlight in any color palette RGB. It communicates with the two-wire I2C bus. The kit includes a cable adapted to Gravity DFRobot IO Expansion...Weather station - thermo-hygrometer Blow TH103
Digital thermo-hygrometer displays the temperature inside, outside and the humidity inside. The probe is on a wire. Working range: inside from -10 °C to +50 °C, outside...- Reduced price
- Promotion
Radio receiver for controlling LED strips
The device is designed for turning on / off and dimming LED lighting in the form of tapes and strips with a remote control. The switch may be dual-channel (3 a per channel) or...- On sale!
- Promotion
Brass distance sleeve - different sizes M2 - set of 120pcs
Distance sleeve which allows the mounting of printed circuit boards, brackets, modules, etc. It is used, when it is necessary to separat e electric elements. Set...DS2413 - controller 1-Wire for 2 GPIOs - Adafruit 1551
The module is based on a DS2413 which has two GPIO pins type Open Drain. It also works with 1-Wire bus. The dimensions of the board are 16 x 10 mm.E-paper E-Ink (B) 1.54'' 200x200px - three-color display (without module) - Waveshare 13275
Module with 1.54" e-paper display with an E-Ink technology with a resolution of 200 x 200 pixels. Works with a voltage of 3.3 V. Designed for use with the main module....iNode Control Point USB - programmable USB module - RFID system
iNode Control ID works the same as iNode Control Point. All information on the verification of the remote devices is transmitted via USB to the computer. It communicates via...- On sale!
- Promotion
- On sale!
- Promotion
Blow USB cable type A - Lightning - iPhone / iPad / iPod - braided Blow - black 1,5m
USB cable in black braid which is used to connect computers with devices with Ligtning connector, it allows for the data transfer and charging. The cable length is 1.5 meters.Arcade Concave Button 3,5cm - yellow - SparkFun COM-09338
Concave button with an outer diameter equal to 35 mm and a height of 65 mm. To the button attached is a simple limit switch.Qwiic - Shield for Arduino - SparkFun DEV-14352
Shield for Arduino facilitating the connection of modules of SparkFun via connectors Qwiic. The shield connects the I2C bus Arduino with connectors Qwiic. As long as the...- On sale!
- Promotion
AS7262 - Visible spectrum sensor - SparkFun SEN-14347
The module is equipped with a sensor of spectrum, i.e. the spectrum of visible light , allows you to measure and to characterize how different materials absorb and reflect...Case for power supply Kradex Z120J - 129x65x75mm light-colored
Case for a power supply. External dimensions it 129,2 x 65 x 75,1 mm.- On sale!
- Promotion
AS7263 NIR - Visible Light Spectrum Sensor - SparkFun SEN-14351
The module is equipped with a sensor of spectrum, i.e. the spectrum of visible light and NIR (near infrared light) that allows you to measure and describe how various...Plastic case for remote control Kradex Z122 IP53 - 108x69x25mm black
2-part, universal case for remote controls. The size of the external is 108,1 x 69,2 x 24,5 mm.- On sale!
- Promotion
Magnetic sensor - reed contact CMD615
Wireless proximity sensor activated magnetically. Case dimensions 15 x 6.5 mm.DFRobot Capacitive Touch Kit - a touch kit for Arduino
A kit for self-assembly of the capacitive touch for Arduino. The set consists of three styles of touch sensors: round in the style of iPod; touch keyboard that supports...AZO Digital Step-Down Voltage Regulator PE-45 - 24/13,8V 500W
Inverter lowering the voltage of the car installation. Allows you to use devices that require 12 V (13.8 V) power through the car 24 V cigarette lighter socket ....- Reduced price
- Promotion
A-II GSM Shield, GSM/GPRS/SMS/DTMF v.2.105 - for Arduino and Raspberry Pi
The new version of the module working with Arduino and Raspberry Pi that provides communication in GSM and GPRS. Based on Quectel M95, it allows for voice calls, sending SMS...