- Reduced price
- Sale
- Reduced price
- Sale
ELECTRONICS - Strona 194
Loading...
Phototransistor 940nm - L-53P3C
Phototransistor in the case of 5 mm. Maximum sensitivity for the wave with the length of 940 nm. The reading angle is 30 °. Transparent lens.
Index: UCC-00271
Index: UCC-00271
High-Power 18v15 - single-channel 30V/15A motor controller - Pololu 755
Based on MOSFET transistors, the efficient H-bridge allows you to control the rotation of the motor in both directions. Power supply to motors: from 5.5 V to 30 V. Maximum...
Index: PLL-00744
Index: PLL-00744
Simple High-Power 18v7 - USB 30V/7A motor driver - assembled - Pololu 1372
Easy-to-use single-channel driver for DC motors. It communicates via the computer's USB port, UART TTL interface, analog signal or RC radio interface. The supply voltage is...
Index: PLL-00747
Index: PLL-00747
Contact plate to check the layout before PCB design. 840 has a hole (pitch 2.54 mm), which can be fastened to the chip and module.
Index: PLY-00890
Index: PLY-00890
IDC 14 pin female-female cable - 30 cm
Universal female cable with the length of 30 cm, ended with 14-pin IDC slots with the pitch of 2.54 mm(standard goldpin) which can be used to create different connections.
Index: KAB-01247
Index: KAB-01247
Reflectance sensor QTR-L-1RC - digital (2 pcs) - Pololu 2455
Module with reflective sensor basing on the transmitting LED and phototransistor operating in the infrared range. The sensor is powered with the 5V voltage. The output is the...
Index: PLL-01407
Index: PLL-01407
Step-Up Voltage Regulator NCP1402 - 3,3V 0,2A - Pololu 2114
Miniature step-up converter. Input voltage 0.8 V to 3.3 V. Output current 200 mA. Output voltage 3.3 V.
Index: PLL-01408
Index: PLL-01408
Trim with QTR-3A reflective sensors - analog - Pololu 2456
Compact bar with three reflective sensors with the size of 32 x 8 mm. It has analog outputs, it is powered with the voltage of 5 V.
Index: PLL-01730
Index: PLL-01730
Trim with QTR-3RC reflective sensors - digital - Pololu 2457
Compact bar with three reflective sensors with the size of 32 x 8 mm. It has analog outputs, it is powered with the voltage of 5 V.
Index: PLL-01731
Index: PLL-01731
Simple High-Power 18v25 - USB 30V/25A motor driver - Pololu 1381
Easy to use single-channel direct current motor controller for self-assembly. It communicates through the USB port of the computer, UART TTL interface, analogue signal or RC...
Index: PLL-01808
Index: PLL-01808
Optical encoder set for Pololu micro motors - version 3,3V - 2 pcs - Pololu 2591
A pair of optical quadrature sensors, designed for installation in micro motors from Pololu. It consists of a board with the sensor and the plastic impeller kit, it allows you...
Index: PLL-01878
Index: PLL-01878
Optical encoder set for Pololu micro motors - 5V version - 2 pcs - Pololu 2590
A pair of optical quadrature sensors, designed for installation in micro motors from Pololu. It consists of a board with the sensor and the plastic impeller kit, it allows...
Index: PLL-01879
Index: PLL-01879
Step-Up/Step-Down Voltage Regulator S18V20F6 - 6V 2A - Pololu 2575
Step-up/step-down converter with 6 V output voltage. Maximum current 2 A . Power supply 3 V - 30 V.
Index: PLL-02099
Index: PLL-02099
Step-Up/Step-Down Voltage Regulator S18V20F9 - 9V 2A - Pololu 2576
Step-up/step-down converter with 9 V output voltage. Maximum current 2 A . Power supply 3 V - 30 V.
Index: PLL-02100
Index: PLL-02100
Step-Up/Step-Down Voltage Regulator S18V20AHV - 9-30V 2A - Pololu 2573
Step-up/step-down converter with adjustable output voltage from 9 V to 30 V. Maximum current 2 A. Power supply 3 V - 30 V.
Index: PLL-02101
Index: PLL-02101
MicroUSB power connector with FPF1320 multiplexer - Pololu 2594
Board with microUSB connector works as a power supply multiplexer. System FPF1320 allows you to choose which of the two sources will be connected to the target system. The...
Index: PLL-02140
Index: PLL-02140
Set of THT ceramic capacitors - 100pcs.
The set of 10 most popular values of ceramic capacitors in through hole housings, 10 pieces of each. The capacitors are packed in separate, described string bags.
Index: PAS-02146
Index: PAS-02146
- Discontinued product
Force sensor linear potentiometer - 36x10mm - Pololu 2729
The pressure sensor changes its resistance depending on the size and point of application of force on the measurement bar with the length of 36 mm. Sensor allows you to easily...
Index: PLL-02350
Index: PLL-02350
Lever switch On-On 250V/3A - 5pcs.
Switch with lever, two-state for printing with 3 contacts with the load of 3A 250V or 6A 125 . Pins pitch is 4.7 mm, total height is 31.0 mm. The set includes nut and...
Index: UCC-02478
Index: UCC-02478
MicroUSB power connector with TPS2113A multiplexer - Pololu 2596
Board with a microUSB connector, which works as a power supply multiplexer. TPS2113A system automatically switches the source and blocks reverse current. It has an adjustable...
Index: PLL-02525
Index: PLL-02525
L3GD20H 3-axis, digital I2C SPI gyroscope - Pololu 2129
Sensor to measure the angular velocity in three axes. It works in the range of up to ±240 °/s, ±500 °/s or ±2000 °/sec. It communicates via the I2C or SPI bus, it has the...
Index: PLL-02608
Index: PLL-02608
Graphic color display TFT LCD 1,8'' 128x160px + microSD reader - SPI - Adafruit 358
Graphic LCD TFT display with a diagonal of 1.8" and a resolution of 128 x 160 px with 18-bit color depth. It works with a voltage of 3.3 V and 5V, communicates through the SPI...
Index: ADA-02663
Index: ADA-02663
A4990 2-channel motor driver 32V/0,65 A - Shield for Arduino - Pololu 2512
Module with two-channel A4990 circuit working with voltages from 6 V to 32 V and current up to 0.65 A per channel (max. 0.9 A). The chip can be connected directly to the...
Index: PLL-02675
Index: PLL-02675
DRV8835 - two-channel 11V / 1,2A engine controller - overlay for Raspberry Pi - Pololu 2753
Module with two-channel circuit DRV8835 operating with voltages from 2 V to 11 V and current up to 1.2 A per channel (max. 1.5 A). It can be connected directly to the GPIO...
Index: PLL-02678
Index: PLL-02678