Arduino - Strona 10
Loading...
Teensy 4.0 ARM Cortex-M7 - Arduino compatible - version with connectors - SparkFun DEV-16997
Teensy 4.0 is a compact development board. The module is equipped with the NXP iMXRT1062 microcontroller with the ARM Cortex-M7 600 MHz core, 1024 KB of Flash memory and...
Index: SPF-21647
Index: SPF-21647
Arduino Opta Lite - mikroPLC driver - AFX00003
Arduino Opta is a microPLC controller that supports industrial IoT standards. It was created in cooperation with Finder, a company that creates industrial and building...
Index: ARD-22376
Index: ARD-22376
- Reduced price
- Promotion
FireBeetle 2 ESP32-S3-U - WiFi, Bluetooth - External Antenna - OV2640 Camera - DFRobot DFR0975-U
The FireBeetle 2 Board ESP32-S3-U (N16R8) module is a board based on the popular ESP32 microcontroller, capable of communicating via WiFi and Bluetooth . The wireless...
Index: DFR-23329
Index: DFR-23329
OLED display 1.32'' 128x96px - SPI/I2C - 16 grayscale - black and white - Waveshare 24777
OLED display from Waveshare is a device that works perfectly with platforms such as Arduino or Raspberry Pi . Thanks to 4-wire SPI and I2C interfaces, it enables...
Index: WSR-23571
Index: WSR-23571
Arduino Science Kit R3 - educational kit - Arduino AKX00045
Arduino Science Kit R3 is an educational kit designed for teaching physics in high schools, integrating Arduino Nano RP2040 Connect and the Science Journal application. It...
Index: ARD-24066
Index: ARD-24066
Pro Micro - 5V/16MHz - Atmega32u4 module - SparkFun DEV-12640
Module based on the Arduino Leonardo, is characterized by small size. It has the AVR Atmega32U4 microcontroller. It is equipped with 20 digital inputs/outputs, as well as...
Index: SPF-01594
Index: SPF-01594
Set of female connectors extended for Arduino Mega i Pro - SparkFun PRT-10007
Strap designed for Arduino Pro Mega. Mounted in a cascade extends the connectors placed on modules. The kit includes four straps: 2 x 8-pin and 2 x 6-pin.
Index: SPF-01749
Index: SPF-01749
Breadboard - 830 holes transparent
Breadboard is used to create and test electronic circuits without soldering. Version with 830 fields, sized 165 x 53 mm in a transparent case . B lue and red stripes, marking...
Index: PLY-01763
Index: PLY-01763
DFRobot 4x Relay - Shield for Arduino v2.1
Overlay with four relays that can be controlled directly from Arduino via digital outputs. Additionally, there is a socket on the board to connect XBee wireless communication...
Index: DFR-02731
Index: DFR-02731
DFRobot Beginner KIT for beginners v3.0
Kit of electronic components for people who want to start their adventure with programming of Arduino. Included are i.a. DFRduino Uno board (compatible with Arduino Uno),...
Index: DFR-02993
Index: DFR-02993
Pro Trinket - ATmega328 module - 5V 16MHz - Adafruit 2000
Module with AVR ATmega328 microcontroller is equipped with 28 KB of Flash memory, 18 digital pins, analog inputs and 8 PWM channels. On board is a microUSB connector, thanks to...
Index: ADA-03005
Index: ADA-03005
MicroView - USB programmer - SparkFun DEV-12924
USB programmer for the module of MicroView OLED display. The device is equipped with male and female connectors, thanks to this, board can be attached directly or connect using...
Index: SPF-03070
Index: SPF-03070
- On sale!
- Promotion
Grove - IR receiver 38kHz 940nm
IR receiver from Grove , operating at a frequency of 38 kHz with a supply voltage from 3.3 V to 5.0 V. Maximum sensitivity is observed for the wave length of 940 nm.
Index: SEE-04419
Index: SEE-04419
Grove - 10kΩ linear sliding potentiometer
Sliding linear potentiometer with a resistance of 10 ohms. Itas a 4-pin Grove connector. The kit includes a cable adapted to Seeedstudio Base Shield v2.0.
Index: SEE-04436
Index: SEE-04436
Arduino StarterKit K000007 - the official starter set with Arduino Uno A000066
Starter set introducting to the world of Arduino® programming. Allows the construction of more than a dozen projects using Arduino® and i. a.: temperature sensor,...
Index: ARD-04796
Index: ARD-04796
DataLogger Shield V1.0 RTC DS1307 with SD card reader - Shield for Arduino - Iduino ST1046
Shield for Arduino with RTC DS1307 and a slot for SD memory cards. It can be used as a data logger, it has a place for a round CR1220 battery and for additional module. It...
Index: MOD-08238
Index: MOD-08238
Module with blue LED, fitted with Grove connectors is ideal for working with Arduino. The LED turns on, when the signal pin goes into high state. In addition, on the board...
Index: SEE-11296
Index: SEE-11296
Grove - LCD display 2x16 characters with RGB backlight
LCD display 2x16 characters with backlight in any color palette RGB. Communicates with the two-wire I2C bus. It is supplied with the voltage from 3.3 V to 5 V. T he kit...
Index: SEE-11326
Index: SEE-11326
DFRobot Shield NB-IoT / LTE / GNSS / GPRS / GPS SIM7070G - Shield for Arduino - DFRobot DFR0572
An Arduino shield that allows you to send text messages and create connections in the GSM network. It also has a GPS and LTE module. It communicates via the UART serial...
Index: DFR-12362
Index: DFR-12362
Cytron SHIELD-2AMOTOR - 2-channel motor driver 26V/2A - shield for Arduino
Shield for Arduino with dual-channel DC motor driver operating with a voltage of 5 V to 26 V and current up to 2 A, based on the L298P circuit. The board has jumpers for...
Index: CTN-12404
Index: CTN-12404
Digispark kickstarter - ATtiny85 - 5V
Miniature module with ATtiny85 microcontroller, equipped with 8 kb Flash memory and 6 I/O ports. The board was printed with a USB connector, thanks to which the chip can be...
Index: OST-14257
Index: OST-14257
Grove - Mega Shield v1.2 - Arduino Shield
The overlay for Arduino Mega extends the capabilities of I/O pins. Adapted to the modules and sensors of the Grove series. It is equipped with 4-pin Grove connectors, as well...
Index: SEE-15263
Index: SEE-15263
Arduino Opta RS485 - mikroPLC driver - AFX00001
Arduino, in cooperation with Finder, has created a microPLC controller - Arduino Opta, which supports industrial IoT standards. Finder deals with the creation of industrial...
Index: ARD-22377
Index: ARD-22377
M3S550 - triple motor controller DC 22V/1,7A - for Arduino - soldered - Pololu 5068
Shield designed to work with Arduino, enabling control of three DC motors . It uses the I2C interface for communication. The controller supports motors powered with voltage...
Index: PLL-23649
Index: PLL-23649