- New
- New
Strip LED SMD5050 IP65 14,4W, 60 LED/m, 10mm, warm white - 5m
Index: LED-07081
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
- On sale!
- Promotion
- Reduced price
- Promotion
Raspberry Pi GPIO extensions - Strona 6
Loading...
Enviro pHAT - temperature, pressure, light intensity and proximity sensor - overlay for Raspberry Pi
Enviro pHAT is an overlay for Raspberry Pi with BME280 and LTR-559 sensors allowing to measure temperature, pressure, light level and proximity sensor. Additionally, the...
Index: PIM-16966
Index: PIM-16966
Unicorn HAT Mini - LED RGB matrix - for Raspberry Pi - Pimoroni PIM498
Overlay for Raspberry Pi made by Pimoroni company. On the board there are 119 RGB LEDs in the form of 17 x 7 matrix . Thanks to the HT16D35A chip it is possible to...
Index: PIM-19068
Index: PIM-19068
NeoKey - key matrix for switches - 76.5 x 21.5 x 4.6 mm board manufactured by Adafruit. It has space for four buttons , including the Kailh socket. Thanks to them, you can...
Index: ADA-19789
Index: ADA-19789
The Adafruit module is equipped with the TCA8418 chip working as a matrix keyboard controller. The chip has a total of 18 I / O pins in a 10 column and 8 row arrangement...
Index: ADA-21996
Index: ADA-21996
Inventor HAT Mini for Raspberry Pi - PiMoroni PIM672
Inventor HAT Mini is perfect for creating robots, props, moving sculptures and other dynamic Raspberry Pi- based projects. The overlay allows you to connect two motors, four...
Index: PIM-23498
Index: PIM-23498
Dual-band GPS/RTK L1+L5 module with LC29H(BS) GNSS chip - overlay for Raspberry Pi - Waveshare 25280
Dual-band GPS module with GNSS LC29H(BS) receiver designed for Raspberry Pi and Jetson Nano minicomputers, supporting L1 and L5 bands. It has an RTK (Real Time...
Index: WSR-23874
Index: WSR-23874
Ultimate GPS Hat + RTC for Raspberry Pi A+/B+/2/3/4 - Adafruit 2324
Do you want to know where your Raspberry Pi is at any time of the day or night? This shield allows you to read the actual time and position with a frequency of 10 Hz using a...
Index: ADA-03284
Index: ADA-03284
Mini Kit DC and stepper motor driver TB6612 - Motor Hat for Raspberry Pi - Adafruit 2348
Shield for Raspberry Pi, version A+, B+ and 2 to control four DC motors (13.5 V/1.2 A) or two stepper motors. It communicates through interface I2, using only two lines of...
Index: ADA-03401
Index: ADA-03401
HiFiBerry Digi + standard - sound card for Raspberry Pi 4B/3B+/3/2/B+/A+/Zero
Hat type overlay for Raspberry versions 4B, 3B+, 3B, 2B, A+, B, Zero with high quality S/PDIF interface and optical connector. The chip used in the device has 24-bit resolution...
Index: RHF-04872
Index: RHF-04872
JustBoom Digi Hat - sound card for Raspberry Pi
Shield for Raspberry Pi with high quality S/PDIF interface. It is used in device, the system has a resolution of 24 bit with the speed of 192 kHz. It has the transformer...
Index: SUP-09571
Index: SUP-09571
HiFiBerry DAC Case + Zero i Raspberry Pi Zero - black
Black case for Raspberry Pi Zero and Zero W minicomputer and HiFiBerry DAC+ Zero overlay with external dimensions 80 x 40 x 40 mm.
Index: RHF-11100
Index: RHF-11100
ADC Differential Pi - MCP3424 - 8-channel A/D converter
Module with high precision A/C converter in the form of shields for GPIO connectors of Raspberry Pi. It has 8 18-bit channels, analog outputs operating in Differential mode...
Index: ABE-11712
Index: ABE-11712
Pi Zero MAX3232 series - RS232 interface for Raspberry Pi
Shield for Raspberry Pi, version A+ / B+ / 2 / 3 / 3+ / Zero / Zero W with system MAX3232 which allows for communication via the RS232 interface. The module has a converter...
Index: ABE-11720
Index: ABE-11720
Grove ADS1115 - 4-channel 16-bit ADC for Raspberry Pi - Seeedstudio 103030279
Grove 4-channel 16-bit ADS1115 ADC is an analog-digital converter (ADC) in the form of shield for GPIO connectors of Raspberry Pi. It is 4-channel ADC based on the ADS1115...
Index: SEE-13814
Index: SEE-13814
UPS HAT for Raspberry Pi Zero - DFRobot DFR0528
A cap designed for the Raspberry Pi Zero , serving as an emergency power supply in the event of a mains power failure. The module is also compatible with other versions of...
Index: DFR-15714
Index: DFR-15714
Trim UPS for Raspberry Pi DFRobot DFR0494
A cap designed for the Raspberry Pi 3B/2B/B+, serving as an emergency power supply in case of mains power failure . The HAT UPS will power the device for a certain period of...
Index: DFR-16434
Index: DFR-16434
- Reduced price
- Promotion
Motoron M3H256 Triple Motor Controller Kit for Raspberry Pi - Pololu 5034
The Motoron M3H256 is a three-channel DC motor controller manufactured by the Pololu company. The supply voltage of DC motors ranges from 4.5 V to 48 V , continuous current...
Index: PLL-21622
Index: PLL-21622
- On sale!
- Promotion
LoRa HAT 868 MHz module - overlay for Raspberry Pi - SB Components 22571
The LoRa HAT 868 MHz module is a data transmission module for Raspberry Pi boards from SB Components, the great advantage of which is undoubtedly the low energy consumption...
Index: SBC-21905
Index: SBC-21905
- On sale!
- Promotion
Dual-channel RS485 Expansion Hat - for Raspberry Pi 4B - DFRobot DFR0824
Dual-channel RS485 Expansion Hat is an overlay designed for the Raspberry Pi 4B minicomputer. It was designed to extend the functionality of the module with RS485...
Index: DFR-22929
Index: DFR-22929
M3H550 - triple motor controller DC 22V/1,7A - for Raspberry Pi - Pololu 5072
A shield for Raspberry Pi that allows you to control three motors powered by voltage from 1.8 V to 22 V. It uses the I2C interface to communicate with the minicomputer....
Index: PLL-23646
Index: PLL-23646
- Reduced price
- Promotion
MSX Proto Hat for Raspberry Pi 4B/3B+/3B/2B
Board allows for self-creation of electronic circuits. It is connected directly to the GPIO pins of the Raspberry Pi minicomputer, version 4B / 3B+ / 3B / 2B.
Index: MSX-04552
Index: MSX-04552
Case for Raspberry Pi 4B/3B+/3B/2B open transparent
Transparent case for Raspberry Pi minicomputer in versions 4B, 3B+, 3B, 2B and 1B+ works, in particular, with hats from the HiFiBerry Digi+, DAC+ Amp+. External dimensions:...
Index: RHF-05409
Index: RHF-05409
Proto Board for Raspberry Pi Zero
Board allows independent creation of electronic circuits. Connected directly to the GPIO pins of the Raspberry Pi minicomputer in a version Zero.
Index: MSX-05794
Index: MSX-05794
Module with USB connector for Raspberry Pi Zero - SparkFun KIT-14526
Overlay equipped with USB connector for Raspberry Pi Zero. Once the overlay is installed on the device it can be connected directly to a computer or HUB without any...
Index: SPF-10869
Index: SPF-10869
