- New
- Reduced price
- Promotion
Aqara Single Switch Module T1 - No Neutral - white - SSM-U02
Index: BNA-23674
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
List of products by brand DFRobot - Strona 23
Loading...
Wireless charging module - 5V/5A - DFRobot FIT0702
The power module from DFRobot uses wireless charging technology that is based on magnetically coupled resonance. The input voltage to be applied to the transmitting element is...
Index: DFR-19029
Index: DFR-19029
Gravity - BME680 I2C environmental sensor - DFRobot SEN0248
A 4-in-1 MEMS environmental sensor equipped with Gravity connector, manufactured by DFRobot. It features an embedded Bosch BME680 chip. The multifunctional module is a...
Index: DFR-19200
Index: DFR-19200
An extension to the BBC micro:bit in the form of a 2-in-1 keyboard - mathematical and automatic, tactile , easy to use and with a wide range of applications. Designed for a...
Index: DFR-19384
Index: DFR-19384
Set of Mecanum wheels - 48 mm - 4 pieces - black/yellow with rollers - DFRobot FIT0662-1
Multidirectional Mecanum wheels from DFRobot included - 4 pieces with a diameter of 48 mm . Thanks to them, vehicles can move in any direction - it is possible to drive...
Index: DFR-19386
Index: DFR-19386
Gravity - LIS2DW12 - 3-axis accelerometer ±2g/±4g/±8g/±16g - I2C - DFRobot SEN0409
Gravity module in a form of 3-axis accelerometer , which allows to measure linear acceleration. It has a built-in LIS2DW12 chip (belonging to the popular LIS series) and...
Index: DFR-19915
Index: DFR-19915
Gravity - RS485 to UART signal converter - DFRobot DFR0845
Module converting transmission signal from RS485 protocol to UART serial interface. It has a built-in TDH541S485H chip. It is compatible with most controllers, including...
Index: DFR-20374
Index: DFR-20374
Fermion - barometric pressure sensor BMP390L - I2C/SPI - DFRobot SEN0423
Bosch BMP390L digital barometric pressure sensor module. It features extremely high temperature stability, low drift, low power consumption and low noise. The maximum...
Index: DFR-20681
Index: DFR-20681
D500 LiDAR Kit STL-19P laser scanner - 360 degrees - 12m - DFrobot SEN0547
LiDAR STL-19P is a laser scanner from DFrobot that offers a range of up to 12 meters and is able to scan an area in the 360 ° range. In addition, the device has been...
Index: DFR-21991
Index: DFR-21991
Dual-channel RS485 Expansion Hat - for Raspberry Pi 4B - DFRobot DFR0824
Dual-channel RS485 Expansion Hat is an overlay designed for the Raspberry Pi 4B minicomputer. It was designed to extend the functionality of the module with RS485...
Index: DFR-22929
Index: DFR-22929
Silicone case for HuskyLens Kendryte K210 - black - DFRobot FIT0647
Silicone case for HuskyLens Kendryte K210. Made of silicone, it is flexible , but at the same time durable . It protects the module against mechanical damage, dust or...
Index: DFR-22936
Index: DFR-22936
Fermion - H2 hydrogen sensor - MEMS - 0,1-1000ppm - DFRobot SEN0572
A compact MEMS sensor from DFRobot that allows you to measure the concentration of hydrogen H2 . The detection range is from 0.1 ppm to 1000 ppm . Additionally, the sensor...
Index: DFR-23738
Index: DFR-23738
Capacitive touch screen LCD 7 '' 1024x600px HDMI + USB
Touch screen, capacitive 7" for minicomputers Raspberry Pi, LattePanda and other HDMI devices. Display resolution up to 1024 x 600 pixels. Touch screen supports up to 5 touches...
Index: DFR-10302
Index: DFR-10302
Bluetooth 2.0 Module V3 For Arduino
The Bluetooth module is made in the design of double board which prevents the electrostatic damages. It has bright LEDs for information about transmission status. It is powered...
Index: DFR-06113
Index: DFR-06113
- EOL
DFRobot WT8266-S1 WiFi Module Based on ESP8266
Wi-fi module based on the chip ESP8266. It works in the wi-fi 802.11 b/g/n standard at 2.4 GHz. It is equipped with 18 pins - pitch of 2 mm, 9 of which are GPIO, 1 ADC and...
Index: DFR-07453
Index: DFR-07453
- EOL
Ardublock KIT- set for graphical programming
The kit includes the base board DFRduino Uno with sensors and extensions that can be programmed graphically using the Ardublock environment via coloured blocks. Friendly and...
Index: DFR-03226
Index: DFR-03226
- EOL
DFRobot Gravity - ultraviolet light sensor UV - ML8511
Analog UV light sensor powered with the voltage of 5 V. The output is an analog voltage, proportional to the intensity of UV light. The sensor can be used to detect harmful...
Index: DFR-11260
Index: DFR-11260
- EOL
WiFiBee-MT7681 (Support Arduino WiFi Wireless Programming)
The XBee module which adds the wi-fi network's abilities to Arduino. It supports remote programming. It works in the IEEE 802.11 b/g/n 2.4 GHz standard. The system is...
Index: DFR-08606
Index: DFR-08606
- EOL
DFRobot Accessory Shield for Arduino and Bluno
Shield designed specifically for modules Bluno (Arduino + BLE) containing an LCD display, potentiometer, relay, joystick with button, temperature and humidity sensor, LED RGB...
Index: DFR-02994
Index: DFR-02994
- EOL
LattePanda Delta 432 - 4GB RAM + 32G eMMC Intel Celeron - Windows 10
Professional development board from LattePanda in Delta version allows to increase the efficiency of created projects. The device is equipped with Intel Celeron N4100...
Index: DFR-18151
Index: DFR-18151
- EOL
DFRobot IO Expansion Shield for Bluno M3
Shield for Bluno M3 that extends the capabilities of I/O pins. It has, i.a. led out digital pins from D0 to D38 with a pair of VCC and GND power, including 5 UART, SPI, I2C...
Index: DFR-05195
Index: DFR-05195
- EOL
DFRobot 4K IPS touch screen display with a 12.5" diagonal screen size and a resolution of 3840 x 2160 px. It supports two operating systems: Windows and Linux. It is...
Index: DFR-17385
Index: DFR-17385
- EOL
DFRobot E-paper of 2.13" 212x104px - pad with tri-color display SPI for FireBeetle
Shield with e-paper 2.13" display with a resolution of 212 x 104 pixels. It communicates via the SPI interface with the FireBeetle. It displays 3 colors: black, white and red.
Index: DFR-12356
Index: DFR-12356
- EOL
DFRobot Interface Shield for Arduino
A shield which extends the capabilities of the Arduino. Interface shield supports several interfaces such as SPI, IIC, microSD, SD, TLC. Shield is compatible with the Arduino...
Index: DFR-09539
Index: DFR-09539
- EOL
Bluno M3 STM32 ARM Cortex + BLE Bluetooth 4.0 - compatible with Arduino
Module from DFRobot is based on the STM32 with 32-bit ARM Cortex-M3 core (72 MHz, 512 KB of Flash, 64 KB of RAM). It has 39 digital inputs/outputs, 11 analog inputs and the...
Index: DFR-05194
Index: DFR-05194
- EOL