- New
Over 500,000 customers already trust us. With us you get:
same-day shipping for products marked “24h shipping”
our own service centre in Poland
30 days to return and free delivery in Poland from PLN 500
4.9/5 on TrustMate and 4.9/5 on Google (almost 4,000 reviews)
VAT invoice, leasing and instalments for businesses
For businesses
individual quote for larger quantities
VAT invoice
For schools and universities
orders based on requests for quotation
help with choosing kits for your lab
Hozo NeoSander Cordless Precision Sander - 13,000 strokes/min - 8 heads
A cordless detail sander that makes 13,000 strokes per minute and weighs just 89 g without the sanding head.
- Eight head shapes for grooves, corners and curves
- Smooth stroke adjustment with a slider from 0.6 mm to 1.8 mm
- Abrasive papers from #180 to #1500 and a USB Type-C cable
We could not load the price.
The promotional price does not combine with quantity discounts.
Precision sanding of prints and models
Hozo NeoSander is a cordless reciprocating detail sander that makes 13,000 strokes per minute and weighs 89 g without the head. The head moves linearly back and forth, which makes it easy to guide along edges and in narrow grooves of a model or mockup.
The stroke can be adjusted smoothly with the slider from 0.6 mm to 1.8 mm. The manufacturer recommends NeoSander for resin, PLA, ABS, wood and metal, and with the right paper also for paint and varnish.
Hozo NeoSander sander with a sanding head
13,000
strokes per minute at every stroke setting
0.6 mm to 1.8 mm
smooth head stroke adjustment with a slider
up to 240 min
of work in typical use, 45 min under full load
8
sanding head shapes included
Eight head shapes of the NeoSander sander
Eight heads for grooves, corners and curves
The set includes 8 heads of different shapes, which can be quickly swapped depending on the area being worked on. The large flat head works with foam paper for curves.
Head shapes: sharp tip, narrow flat, medium flat, large flat, half-round, arc, 45° acute angle and 90° right angle. The set also includes papers from #180 to #1500.
Linear motor without a gearbox
The linear motor drives the head directly, without a gearbox or eccentric, so it runs evenly even with a short stroke. The head runout is below 0.05 mm, meaning the head barely deviates from its axis, and the manufacturer states that motor vibrations are lower by 85 %.
Under strong pressure the stroke frequency does not change, but the stroke gets shorter, which may look like the tool slowing down. The sander can also be used while it is charging.
NeoSander sander smoothing a model detail
Sanding a model part with the NeoSander precision head
Practical applications
- 3D printing: removing support marks and layer lines from PLA, ABS and resin
- Modelling: smoothing details of scale models and figurines in grooves and corners
- Wood: sanding carvings and small parts in hard-to-reach places
- Restoration: metal, car paint and powder coatings with the right paper
Is it the right choice for you?
A good choice if:
- You work on 3D prints made of resin, PLA or ABS and remove support marks
- You sand small details of scale models and models in grooves and corners
- You want a lightweight sander with stroke adjustment for precise work
Consider another option if:
- You hand-sand larger flat surfaces: the Hozo NeoBlock block will be a better choice
NeoSander set comparison
| NeoSander | NeoSander Premium Combo | |
|---|---|---|
| Sanding heads | 8 (8 shapes) | 64 (8 shapes x 8 grits) |
| Head organizers | no | 8 |
| Charging station with space for papers | no | yes |
| Abrasive papers from #180 to #1500 | yes | yes |
| USB Type-C cable | yes | yes |
| See | this page | NeoSander Premium Combo |
Fun fact
It is not a toothbrush with paper
The manufacturer compares NeoSander to an electric toothbrush with paper stuck on and explains how it differs. The sander head moves in a straight line back and forth with a stroke of up to 1.8 mm and a runout below 0.05 mm, so the pressure on the worked surface stays stable and sanding is easier to control on small details.
Source: Hozo Design: product page
Frequently asked questions
Does the sander melt the plastic?
Rarely. The paper touches the material only briefly, so heat builds up slowly, and water limits it further.
Can I sand wet?
Yes, with waterproof abrasive paper. The manufacturer recommends it for resin, because water limits heating.
Does it sand metal and paint?
Yes. With the right paper it sands metal, car paint and powder coatings, as stated by the manufacturer.
Does it work while charging?
Yes. The sander can work while charging through the USB Type-C port, so there is no need to interrupt your work.
Package contents
Package contents
- 1 x NeoSander sander
- 1 x Set of 8 sanding heads
- 1 x Set of abrasive papers from #180 to #1500
- 1 x USB Type-C cable
- 1 x User manual
Note: the set does not include saw blades or a charging station.
Technical specification
| Parameter | Value |
|---|---|
| Manufacturer | Hozo Design |
| Manufacturer code | S01 |
| Motor type | linear reciprocating motor |
| Frequency | 13,000 strokes/min |
| Stroke | 0.6 mm to 1.8 mm, smooth adjustment |
| Power | 0.8 W to 5 W, adjustable |
| Head runout | below 0.05 mm |
| Battery | 3.7 V, 1100 mAh |
| Operating time | 45 min (full load), up to 240 min (typical use) |
| Charging | USB Type-C, 5 V / 1 A, PD compatible |
| Operation while charging | yes |
| Operating temperature | 0 °C to 60 °C |
| Ingress protection | IP54 (body), splash-resistant front |
| Housing materials | magnesium, aluminum, steel, ABS+PC |
| Dimensions | 104 x 33 x 28 mm |
| Weight | 89 g (without head) |
Useful links
| Name | Value |
|---|---|
| Width | 20 cm |
| Height | 15 cm |
| Depth | 7 cm |
| Weight | 0.5 kg |
GLS
Shipping in 24 hours
from €8.07
The full delivery terms are on the page Delivery and payment.
30 days to return, without giving a reason
If the product does not meet your expectations, you have 30 days from receiving the parcel to withdraw from the contract. The product only has to be complete. The right of return belongs to consumers (a purchase unrelated to business activity).
Complaints
If the product turns out to be faulty, you can make a claim under the guarantee or the statutory warranty. We handle claims without delay, at the latest within 14 working days of receiving the report together with the goods.
Be the first to ask a question about this product!
Instructions and documents
GPSR data
Products from the same category
See all
