- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Sale
- Sale
ELECTRONICS - Strona 178
Loading...
MIDI - control and sound synthesis module - SAM2695 - expansion Unit - M5Stack U187
MIDI Unit is a module for controlling MIDI channels and sound synthesis , based on the SAM2695 chip. It supports the MIDI 1.0 standard , offers 64-voice polyphony, and...
Index: MSS-25432
Index: MSS-25432
Gravity: Analog Infrared CO2 Sensor For Arduino (0~50000 ppm)
High-precision sensor that measures the concentration of CO2 (carbon dioxide) in the air. It is equipped with an UART interface, it works with a voltage from 4.5 V to 5.5 V. It...
Index: DFR-08110
Index: DFR-08110
Dual-band GPS/RTK L1+L5 module with LC29H(DA) GNSS chip - overlay for Raspberry Pi - Waveshare 25279
Dual-band GPS module with GNSS receiver LC29H(DA) designed for Raspberry Pi minicomputers, supporting L1 and L5 bands. It provides fast and precise centimeter-level...
Index: WSR-23875
Index: WSR-23875
Biomedical electrodes - 10pcs - SparkFun SEN-12969
10 pieces of biomedical sensors that can be used during EEG, ECG and EMG examination. The device are of single use, they have a layer of a latex gel.
Index: SPF-02604
Index: SPF-02604
Filament Spectrum Smart ABS 1,75mm 1kg - Dark Grey
Filament made of Smart ABS, used as a cartridge for 3D printers. The diameter is 1.75 mm. The set includes 1kg of filament in Dark Grey color. It requires a heatbed.
Index: SPC-11456
Index: SPC-11456
Mounting fan 3007 - 5V - for Raspberry Pi CM4 - Waveshare 23326
Mounting fan from Waveshare that allows for quick and effective heat dissipation from the module that heats up during operation. It is compatible with the Raspberry Pi CM4...
Index: WSR-22142
Index: WSR-22142
Filament Spectrum Smart ABS 1,75mm 1kg - Polar White
Filament made of Smart ABS, used as a cartridge for 3D printers. The diameter is 1.75 mm. The set includes 1kg of filament in Polar White color. It requires a heatbed.
Index: SPC-11451
Index: SPC-11451
Filament Fiberlogy Nylon PA12 1,75mm 0,75kg - Natural
Filament Nylon PA12 in natural color by Fiberlogy is designed for printing in FFF / FDM technology and for printers that do not have protection against cartridges from...
Index: FLA-16103
Index: FLA-16103
Filament Spectrum Smart ABS 1,75mm 1kg - Bahama Yellow
Filament made of Smart ABS, used as a cartridge for 3D printers. The diameter is 1.75 mm. The set includes 1kg of filament in Bahama Yellow color. It requires a heatbed.
Index: SPC-11454
Index: SPC-11454
RS485 CAN HAT - overlay for Raspberry Pi - Waveshare 14882
Shield for Raspberry Pi, version 4B / 3B+ / 3B / 2B / Zero / Zero W with system SN65HVD230 which allows communication between CAN and SPI and the SP3485 system that...
Index: WSR-12532
Index: WSR-12532
Big Push Button 10cm red - SparkFun COM-09181
Big button with an outer diameter of 10 cm, with built-in LED illuminating the dome.
Index: SPF-02174
Index: SPF-02174
Cables for biomedical electrodes - SparkFun CAB-12970
Wires ended on the one side with three connectors for biomedical electrodes, on the other, with jack connector of a 3.5 mm.
Index: SPF-02605
Index: SPF-02605
RS485/RJ45 converter - TCP/IP to serial port - Waveshare 20978
Converter enabling bidirectional communication between the RS485 and Ethernet interface. It offers supports protocols such as TCP/IP, MQTT and JSON , making it an ideal...
Index: WSR-24478
Index: WSR-24478
Big Push Button 10cm - red (eko2 version)
Big button with an outer diameter equal to 10 cm. Eko2 buttons can rattle when shaking but they perfectly perform their function.
Index: SWT-03656
Index: SWT-03656
LCD IPS display 1,47'' 172x320px - SPI - rounded - Waveshare 22224
IPS LCD display module with a diagonal of 1.47 " and a resolution of 172 x 320 px. The display has rounded edges, making it ideal for a smart band design. The module is...
Index: WSR-21704
Index: WSR-21704
Flexible Qwiic Female Cable with 4-pin plug - 15cm - SparkFun PRT-17261
Flexible cable for Qwiic system, equipped with four wires terminated with standard female connector of 2.54 mm pitch and Qwiic type JST connector having 4 pins of 1 mm...
Index: SPF-19155
Index: SPF-19155
SenseCAP Indicator for Meshtastic & LoRa is an advanced communication device that enables a quick start in LoRa mesh technology with Meshtastic . Pre-installed firmware allows...
Index: SEE-25958
Index: SEE-25958
MagnetoPot - non-contact magnetic linear potentiometer - 50mm - Sparkfun SEN-27312
MagnetoPot is a unique, sealed linear potentiometer operating on the principle of magnetic interaction, without the traditional mechanical slider . Instead of physically...
Index: SPF-26398
Index: SPF-26398
RTK Postcard Module - GNSS-RTK Quectel LG290P - ESP32-PICO-MINI-02 - SparkFun GPS-26916
SparkFun RTK Postcard is a professional RTK satellite positioning module designed for reliable and precise real-time navigation. Equipped with Quectel LG290P receiver...
Index: SPF-26399
Index: SPF-26399
The Waveshare display is a universal solution for embedded, educational, multimedia and commercial projects. The high-quality IPS matrix with a resolution of 1280 x 800 px...
Index: WSR-25952
Index: WSR-25952
AI camera module ESP32-S3 - OV3660 2MPx - WiFi/Bluetooth - DFRobot DFR1154
Advanced smart camera module based on ESP32-S3 chip, which offers image recognition on edge devices, voice interaction and night vision . Ideal for IoT applications such...
Index: DFR-26412
Index: DFR-26412
Audio Player Breakout - MP3 and WAV player - MY1690X-16S - SparkFun BOB-28038
Audio Player Breakout is a small board based on the MY1690X decoder, designed to quickly and easily add audio playback functionality to electronic projects. The device...
Index: SPF-26593
Index: SPF-26593
The ESP32‑P4‑Function‑EV‑Board v1.5.2 is a multimedia development board with the ESP32‑P4 (dual‑core RISC‑V clocked at 400 MHz ) and a WiFi 6 and Bluetooth LE module...
Index: MCS-26866
Index: MCS-26866