- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
Switches and buttons - Strona 12
Loading...
Gravity - LED Button - White - DFRobot DFR0785-W
Module with round button additionally equipped with backlight, which is responsible for the built-in LED. After pressing the cap the diode lights up in white color. Gravity...
Index: DFR-20078
Index: DFR-20078
Tact Switch 12x12, 7mm THT 6pin - orange backlight - 5pcs.
A small monostable button mounted in a through-hole way - THT with six pins with the size: 12x12 mm, height: 7 mm. The button is with the backlight in the orange color.
Index: SWT-04787
Index: SWT-04787
- Discontinued product
Slide switch SS22T25 2-position - 5pcs
Slide switch, straight, to print with the size of 9 x 3.5 x 3.5 mm. Pins pitch: 2.5 mm. Items are sold in sets of 5 pieces.
Index: UCC-05272
Index: UCC-05272
Rotation sensor, encoder with button - module - Waveshare 9533
Knob in the form of an encoder with a button that allows you to create a simple user interface. The module sends a digital signal on the SIA and SIB pins, depending on the...
Index: WSR-04483
Index: WSR-04483
Safety switch ON-OFF mushroom - 30mm
The "mushroom" safety switch with a loading capacity of contacts: 3 A for 250 V.
Index: NSZ-09800
Index: NSZ-09800
ON-OFF Switch ASW-14D with LED, 12V/20A - orange
Switch with the lever for printing with 3 contacts with a load capacity of 20 A and 12 V. Pins pitch is 6.5 mm, total height is 43 mm. The switch has a built-in light.
Index: UCC-08390
Index: UCC-08390
Slide switch, angled, to print with the size of 10 x 2.5 x 6.5 mm. Pins pitch: 2.54 mm.
Index: UCC-00256
Index: UCC-00256
IRF520 MOSFET Driver Module - Iduino ST1168
The executive module with the MOSFET transistor with the N channel to control the devices with higher current consumption than allowed by the control system, for example, a...
Index: MOD-08236
Index: MOD-08236
ON-OFF bistable switch - PBW-16APP - 2A 250V - flat green
Flat bistable button with green illumination. Contact load is up to 2 A for 250 V.
Index: AKS-10812
Index: AKS-10812
DFRobot Gravity - digital button Tact Switch - yellow
Digital monostable switch with 3-pin connector . It is powered from 3.3V to 5V and works with Arduino modules.
Index: DFR-11279
Index: DFR-11279
ON-OFF switch monostable - PBW-19BS - 2A / 250V protruding
Monostable salient button with a loading capacity of contacts: 2 A for 250 V.
Index: AKS-12072
Index: AKS-12072
- Discontinued product
Tact Switch 6x6mm/9,5mm SMD - 5pcs.
A small monostable button mounted in a surface way - SMD, with the size: 6x6 mm, height: 8 mm. Price per 5 pieces.
Index: SWT-00383
Index: SWT-00383
Velleman VMA315 - Thumb Joystick with button - 2pcs.
The module is equipped with a joystick similar to analog devices used for example in PlayStation controllers. It has the ability to detect movements in two directions and...
Index: VEL-13025
Index: VEL-13025
Tact Switch 12x12mm - colored buttons - 4pcs. - SparkFun PRT-14460
Monostable button mounted in a through-hole way - THT with the size: 12x12 mm, height: 8 mm. In the set are 4 buttons.
Index: SPF-10665
Index: SPF-10665
Switch ON-OFF KN3(C)-201 250V/6A
A printable lever switch equipped with 4 contacts, rated 6 A / 250 V or 10 A / 125 V. It enables switching on two devices simultaneously. Leads raster is 25 mm, total height...
Index: UCC-08393
Index: UCC-08393
ON-OFF bistable switch - PBW-16APP - 2A 250V - flat red
Bistable pushbutton, flat with red lighting. Load capacity of contacts up to 2 A for 250 V .
Index: AKS-10811
Index: AKS-10811
Mini I2C Gamepad - module with joystick and buttons - STEMMA QT/Qwiic - Adafruit 5743
This compact gamepad board allows you to create a game controller or robot for various microcontrollers using the I2C interface . With a convenient 2-axis thumb joystick...
Index: ADA-23372
Index: ADA-23372
Tact Switch 6x6mm/4,3mm SMD - 5pcs.
A small monostable button mounted in a surface way - SMD with the size: 6x6 mm, height: 4.3 mm. The price is for 5 pieces.
Index: SWT-00379
Index: SWT-00379
Arcade Push Button 3,3cm black case - blue with backlight
A push button with an outside diameter of 33 mm and a height of 60 mm, with a built-in LED that illuminates the dome in blue. A simple limit switch is included with the button.
Index: SWT-05281
Index: SWT-05281
Rotary switch 3-position 4 circuits - 60mm
Rotary switch, 3-state for the case, equipped with 16 contacts. The total height is 60 mm.
Index: UCC-06152
Index: UCC-06152
DFRobot Gravity - digital blue button
Digital monostable switch with 3-pin connector. It is powered with the voltage from 3.3 V to 5 V, it works with Arduino modules.
Index: DFR-08045
Index: DFR-08045
DFRobot Gravity - digital button Tact Switch - green
Digital monostable switch with 3-pin connector. It is powered with the voltage from 3.3 V to 5 V, it works with Arduino modules.
Index: DFR-11276
Index: DFR-11276
Joystick V1.1 MEGA8A - expansion Unit for M5Stack development modules
Joystick V1.1 MEGA8A in the form of a Unit extension for use with M5Stack development modules. The controller has the form of an analog knob similar to those used, among...
Index: MSS-21398
Index: MSS-21398
- Discontinued product
Rotary switch 3-position 4 circuits - 37mm
Rotary switch, 3-state for the case, equipped with 16 contacts. The total height is 37 mm.
Index: UCC-06146
Index: UCC-06146