- New
- On sale!
- Promotion
SwitchBot Contact Sensor - door/window and light intensity sensor
Index: POL-22575
- On sale!
- Promotion
- Reduced price
- Promotion
Plastic case for remote control Kradex Z122 IP53 - 108x69x25mm black
Index: KDX-10123
- On sale!
- Promotion
Electromagnets - Strona 2
Loading...
The device allows to perform a linear - pulling motion with a voltage signal of 12 V. The range of the bolt is approximately 10 mm.
Index: MOD-03661
Index: MOD-03661
Holding electromagnet is powered with voltage of 12 V with power of 4.2 W. It keeps the weight of 180 kg by standard earth acceleration of 9.8 m/s2. The dimensions of the...
Index: MOD-08835
Index: MOD-08835
Electromagnet pushing 12V 2kg 25mm
The pushing electromagnet is powered by 12 V , it can push out a mass of 2 kg with a standard earth acceleration of 9.8 m/s2. The housing diameter is 25 mm and the bolt...
Index: AKS-19283
Index: AKS-19283
The holding electromagnet powered with the voltage of 6 V with a power of 2.5 W. It holds a weight of 2 kg in standard earth acceleration of 9.8 m/s2. Case diameter is 20 mm,...
Index: MOD-03096
Index: MOD-03096
The holding electromagnet is powered by 24 V with a power of 2.5 W. It holds a mass of 3 kg at a standard acceleration due to gravity of 9.8 m/s 2 . The body diameter is 20...
Index: MOD-07027
Index: MOD-07027
The device allows to perform a linear - pulling motion with a voltage signal of 12 V. The range of the bolt is approximately 10 mm.
Index: MOD-08072
Index: MOD-08072
Pulling electromagnet 12V 0,8kg
A small pulling solenoid with a pin range of 10 mm. The device, after receiving a 12 V voltage signal, performs a straight pulling motion . The electromagnet draws about 1 A...
Index: DNG-17761
Index: DNG-17761
Pulling electromagnet 12V 8,4W 3,5kg
A device which, under the influence of providing a 12-volt voltage pulse, performs a pulling linear motion. The range of the electromagnet pin is 12 mm and its maximum load...
Index: DNG-17762
Index: DNG-17762
Holding electromagnet 12V 8W 20kgf
The holding electromagnet powered with voltage of 12 V and a capacity of 8 W. It holds a weight of 20 kg in standard earth acceleration 9.8 m/s2. The body diameter is 40 mm and...
Index: MOD-04600
Index: MOD-04600
Electromagnet holding 12V 2W 8kgf
The holding electromagnet is powered by 12 V. The rated power is 2 W. The maximum load capacity of the magnet is 8 kg with a standard gravitational acceleration of 9.8 m/s...
Index: DNG-17569
Index: DNG-17569
The device allows to perform a linear - pulling motion with a voltage signal of 12 V. The range of the bolt is approximately 10 mm.
Index: MOD-08073
Index: MOD-08073
Electromagnet holding 12V 15W 240kgf
Holding electromagnet with a maximum load capacity of 240 kg (at standard gravitational acceleration of 9.8 m/s 2 ). Powered by 12 V. Current consumption is approximately...
Index: DNG-17583
Index: DNG-17583
The holding electromagnet powered with the voltage of 12 V with a power of 3.5 W. It holds a weight of 4 kg in standard earth acceleration of 9.8 m/s2. Case diameter is 25 mm,...
Index: MOD-04599
Index: MOD-04599
Electromagnet holding 12V 4W 45kgf
Holding electromagnet, powered by 12 V. With a standard acceleration due to gravity of 9.8 m/s 2 it maintains a mass of 45 kg . The current consumption of the device is...
Index: DNG-17577
Index: DNG-17577
Electromagnet holding 12V 10W 70kgf
Powered by 12 V , the holding electromagnet holds a mass of 70 kg under standard acceleration due to gravity (9.8 m/s 2 ). Current consumption during operation is...
Index: DNG-17580
Index: DNG-17580
- Reduced price
- Promotion
Electromagnet holding 6V 3W 0,48A 15kgf
Holding electromagnet powered by 6 V , with a maximum load capacity of 15 kg at a standard gravitational acceleration of 9.8 m/s 2 . Current consumption is approx. 0.48...
Index: DNG-17571
Index: DNG-17571
Electromagnet holding 12V 3,5W 30kgf
Holding electromagnet with a rated power of 3.5 W. Powered by 12 V. Current consumption is approximately 300 mA. The device maintains a mass of 30 kg under standard...
Index: DNG-17574
Index: DNG-17574
Module from the Grove series equipped with holding electromagnet. It h olds a weight of 1 kg in standard earth acceleration of 9.8 m/S2. Body diameter is 20 mm and its height...
Index: SEE-11307
Index: SEE-11307
Electromagnet holding 12V 13W 120kgf
Powered by 12 V holding electromagnet, with a maximum load capacity of 120 kg (at standard gravitational acceleration of 9.8 m/s 2 ). The device consumes approximately...
Index: DNG-17582
Index: DNG-17582
Elektromagnes trzymający 12V 280kg
Holding electromagnet is powered with voltage of 12 V. It keeps the weight of 280 kg by standard earth acceleration of 9.8 m/s2. The dimensions of the electromagnet are 250 x...
Index: AKS-11801
Index: AKS-11801
Electromagnet holding 12V 1W 80mA 1kgf
Holding electromagnet, powered by 12 V. With standard acceleration due to gravity (9.82 m/s 2 ) it maintains a mass of 1 kg . Current consumption is approx. 80 mA, rated...
Index: DNG-17565
Index: DNG-17565
Electromagnet holding 12V 4W 30kgf
Powered by 12 V , the holding electromagnet holds a mass of 30 kg at a standard acceleration due to gravity of 9.8 m/s 2 . The rated power of the device is 4 W and the...
Index: DNG-17576
Index: DNG-17576
The electromagnet is equipped with a 15 mm long pin, which after receiving a 12 V voltage signal makes a linear - pulling motion. The device draws a current of approx. 1.8...
Index: DNG-17764
Index: DNG-17764