- New
- On sale!
- Promotion
- New
- On sale!
- Promotion
Plastic case Kradex Z128 ABS sealed with brass sleeves light-colored
Index: KDX-12842
- On sale!
- Promotion
Laser sensor of dust /particle concentration PM2.5 - PMS5003
Index: DFR-03943
- Reduced price
- Promotion
- Reduced price
- Promotion
Relay modules - Strona 2
Loading...
DFRobot Gravity - relay 1 channel - 10A/277VAC contacts - 5V coil
Module with relay that allows for the control of the actuators consuming the current of up to 12 A for the voltage of 125 V or 10 A for 277 V through the ports of the...
Index: DFR-05964
Index: DFR-05964
Numato Lab - 4-channel relay module 12V 7A/250VAC + 6GPIO - USB
The module is equipped with four relays JQC-3FC with a coil supplied with voltage of 12 V. The system is controlled directly from the USB connector. In addition, the module has...
Index: MOD-08600
Index: MOD-08600
- Reduced price
- Promotion
Relay module Velleman 4 channels - 10A / 250VAC contacts - 5V coil
Quadruple module is equipped with SRD-05 relay with a coil powered with the voltage of 5 V, the transistor amplifier and mounting holes. The system allows you to control...
Index: VEL-13900
Index: VEL-13900
Relay module 1 channel - 3A/250VAC contacts - 5V coil
The module is equipped with HK4100F relay with the voltage of 5 V. T he system allows you to control the actuators with a voltage of 250 V AC / 30 V DC , using the ports...
Index: OST-14297
Index: OST-14297
Gravity - snap-on 10A/250VAC magnetic relay - for Arduino and ESP32 - DFRobot DFR0996
Magnetic latching relay 10 A / 250 V AC from DFRobot. Compared to other relays, it is distinguished by the fact that it needs two digital pulse signals to switch the ON /...
Index: DFR-22838
Index: DFR-22838
The module with the HAT shield for Raspberry Pi is equipped with eight HLS8L relays with a coil powered with a voltage of 5 V along with optoelectronic insulation. The system...
Index: WSR-13301
Index: WSR-13301
Industrial 8-channel relay module from Waveshare, communicating via RS485 interface and supporting Modbus RTU protocol. Relays allow switching devices with voltage of 230...
Index: WSR-25685
Index: WSR-25685
- New
Tinycontrol LANKON-094 - relay module 4x10A /coil 5V for GSM/LAN controller - for DIN rail
The module is equipped with 4 RELPOL RM50 relay a coil supplied with a voltage of 5V, with optical isolation input and mounting holes. The system is designed to work with LAN...
Index: TNC-08293
Index: TNC-08293
Grove - 2-channels relay with optoisolation - 10A/250VAC - coil 5V + clear case
The module has two SRD-05 relays with the coil powered with the voltage of 5 V with optical insulation of input and mounting holes. The system allows you to control...
Index: SEE-12626
Index: SEE-12626
Tuya RTX WRS2 - 2x relay 100-240V AC WiFi
Ready-made two-channel WiFi relay module. The device allows you to control two 100-240V AC devices with a maximum power consumption of 1150 W or two LED lighting sources...
Index: REM-16912
Index: REM-16912
The module is designed to control up to 32 relays with a voltage of 230 V AC or 30 V DC and a maximum current of 10 A via the RS485 interface. It uses the Modbus...
Index: WSR-24985
Index: WSR-24985
Module with relay working with Raspberry Pi Pico produced by SB Components. Made of high quality materials, the overlay is the perfect solution for switching loads in Pico...
Index: SBC-22072
Index: SBC-22072
- On sale!
- Promotion
Grove - relay 1 channel - 30A-250VAC / 30VDC contacts - 5V coil
Module with relay that control the actuators consuming the current of up to 30 A for the voltage of 250 V AC, 30 V DC using the ports of the microcontroller. The module is...
Index: SEE-11351
Index: SEE-11351
Remote controller 12/24V DC - 433.92Mhz - 2 channels
The radio receiver allows you to control 2 devices operating at 250 V AC via NO/NC relay outputs. The module operates at 433.92 MHz, 2 remote controls are included to control...
Index: ELB-16010
Index: ELB-16010
Remote controller 12/24V DC - 433.92Mhz - 4 channels
The radio receiver equipped with relays enables control of 4 devices operating at 250 V AC via NO/NC relay outputs. The receiver communicates with a frequency of 433.92 MHz...
Index: ELB-16011
Index: ELB-16011
IoTPi - 6-channel relay module RS485 RP2040 + ESP8266 WiFi - SB Components SKU24179
IoTPi is equipped with 6 relays galvanically separated from the control system . The module from SB Components is based on the RP2040 microcontroller enabling communication...
Index: SBC-22452
Index: SBC-22452
- On sale!
- Promotion
IoTPi - 4-channel relay module RS485 RP2040 + ESP8266 WiFi - SB Components SKU24162
The IoTPi module is equipped with 4 relays with galvanic separation and is based on the Raspberry Pi 2040 microcontroller with the ESP8266 module. The additional ESP...
Index: SBC-22453
Index: SBC-22453
- On sale!
- Promotion
Numato Lab - 4-channel 2A + 4GPIO relay module - USB
The Numato Lab module is equipped with four relays DPDT HFD27 / 005-S with a coil powered with a voltage of 5 V. The board can be controlled from a computer using a USB...
Index: NUM-21949
Index: NUM-21949
2 Channel Powered Relay Module 5V 1A/125VAC + 4GPIO - USB
The module has two relays HFD27/005-S with a coil with a 5 V voltage. The circuit is operated directly from the USB connector. In addition, the module provides 4...
Index: MOD-08599
Index: MOD-08599
Numato Lab - relay module 1 channel - 1A/120VAC contacts - 5V coil + 4GPIO - USB
The module is equipped with one KT-450 relaywith a coil suppied with voltage of 5 V. The system is controlled directly from the USB connector. In addition, the module provides...
Index: MOD-08601
Index: MOD-08601
Inveo LanTick Pro PE-2-2 - IoT relay module
Inveo modules allow remote control of devices via Internet. It has 2 relay outputs of 250V and 2 binary inputs operating in counter mode. The module is controlled through the...
Index: INV-09117
Index: INV-09117
Inveo LanTick Pro PE-4-4 - IoT relay module
Inveo modules allow remote control of devices via Internet. It has 4 relay outputs of 250V and 4 digital inputs operating. The module is controlled through the built-in WEB...
Index: INV-09118
Index: INV-09118
Inveo LanTick Pro PE-8-0 - IoT relay module
Inveo modules allows remote control of devices via Internet. It has 8 relay outputs of 250V and a built-in WEB server. It is adapted for mounting on a DIN rail.
Index: INV-09119
Index: INV-09119
Inveo Nano OUT - IoT module with relay
Inveo modules allow remote control of a device via the Internet. It has 1 relay output of 250 V and a built-in WEB server.
Index: INV-09120
Index: INV-09120
