Relay modules - Strona 3
Prodigy ZRX - 64-channels RTU/TCP relay module with USB/RS485/Ethernet inputs
The module with 64 250 V / 5 A relay channels can be controlled via Modbus RTU via USB and RS485 and Modbus TCP via Ethernet. These ports allow the module to be controlled by...Gravity - relay module - with DC-USB adapters - DFRobot DFR0643
Relay module included with DC adapters manufactured by DFRobot. It has a built-in Gravity connector , which allows to reduce the number of connection wires, making it...Numato Lab - 32-channels relay module 24V 7A/240VAC + 8 GPIO + Ethernet
The Numato Lab module is equipped with 32 relays with 24V coil. The relays have a contact load of 7 A / 240 V AC . Additionally on the board there are 8 GPIO pins working...Relay module 1 channel - 10A/250VAC contacts - 5V coil
The module is equipped with relay JQC-3FF-S-Z with coil powered with voltage 5 V without optical isolation of input. The system allows you to control actuators with...Grove - relay 1 channel - 30A-250VAC / 30VDC contacts - 5V coil
Module with relay that control the actuators consuming the current of up to 30 A for the voltage of 250 V AC, 30 V DC using the ports of the microcontroller. The module is...Transistor switch with adjustable delay - 15A / 36V
The module equipped with transistors powered with the voltage from 5 V to 36 V. T he system allows you to control actuators using microcontroller ports or any development set ....Relay module Iduino 4 channels - 10A/250VAC contacts - 5V coil
Module with four SRD-05 relays with a 5 V coil and optical insulation of the input as well as mounting holes. The system allows you to control the actuators by means of...Relay module 2 channels H/L with optoisolation - contacts 10A/250VAC - coil 12V
The module has two SRD-05 relays with the coil powered with the voltage of 12 V with the optical insulation of the input and mounting holes. The system allows you to control...