List of products by brand Adafruit - Strona 5
Touch screen Adafruit LCD display 2,8'' 320x240px + microSD reader - Adafruit 1770
2.8" graphic LCD TFT touch screen display with 320 x 240 px resolution and 18-bit colour depth. It works with a voltage of 3.3 V and 5V and communicates via the SPI bus....GEMMA - miniature platform with a microcontroller Attiny85 3,3 V - Adafruit 1222
Miniature, round module with AVR Attiny85 microcontroller has an 8 KB Flash memory, 3 digital pins, analog input and 2 channels of PWM. On board is miniUSB connector, through...- Reduced price
- SPECIAL OFFERS
Conductive thread 3-ply 0,25 mm Adafruit - reel 18m
Thin, strong and smooth conductive thread made of stainless steel 316L. The product allows for hand and machine sewing. The thread has a low resistance of about 0.8 Ω per inch,...Conductive thread 2-ply 0,20mm Adafruit - spool 23m
Conductive thread with the medium thickness (0.2 mm), made of stainless steel of 316L. The thread has a resistance of approx. 1.3 Ω per inch, it conducts the current of up to...Snaps for conductor threads - 24pcs - Adafruit 1126
Tinned latches which can be soldered, for example, to Flora connectors. They allow you to connect conductive wires to the microcontroller. Price is per set of 24 PCsFLORA wearables controller - compatible with Arduino - Adafruit 659
Small, round module with microcontroller AVR Atmega 32u4. Flora is designed to handle smart clothes, on the board is miniUSB connector, thanks to which the system can be...Bluefruit LE UART Friend - Bluetooth Low Energy (BLE 4.0) - Adafruit 2479
The board with a Bluetooth Low Energy module and the remote communication interface UART.Metro Mini 328-5V/16MHz - compatible with Arduino - Adafruit 2590
The Adafruit module is fully compatible with the Arduino Mini. It has 20 digital input/outputs, 6 PWM channels, 6 analog inputs, as well as popular communication interfaces. On...- Reduced price
- SPECIAL OFFERS
Prototype board for LED diodes SMD5050 - 10pcs. - Adafruit 1762
Prototype board to facilitate the use of SMD 5050. Outputs are openings for goldpin connector, raster 2.54 mm suitable for breadboards. Price for 10 pieces.- Reduced price
- SPECIAL OFFERS
APA102 SMD5050 - set of RGB LEDs with built-in controller - 10pcs
A set of ten individually addressed RGB LEDs SMD 5050 with built-in controller using two-wire communication Protocol SPI.RTC DS1307 I2C - real time clock - Adafruit 3296
Module with real time clock and backup battery. It is used in applications written to register data, in clock, alarms, etc. Communication interface is an I2C bus.DRV8833 DC/Stepper Motor Driver Breakout Board - Adafruit 3297
Dual channel DC motor controller. Continuous current per channel 1.2 A (momentary up to 2 A). Supply voltage ranges from 2.7 V to 10.8 V.Bone Conductor Transducer - pressure speaker - 1W - Adafruit 1674
Miniature pressure speaker that converts any flat surface into a sound source. Does not need air for raising the voice. It can be applied directly to the head and not heard by...Monochrome graphical OLED display 0,96 '' 128x64px - I2C/SPI - Adafruit 326
Small monochrome OLED-display with a diagonal of 0.96" and a resolution of 128 x 64. Characterized by high contrast. The device works with voltages of 3.3 V and 5 V,...- Reduced price
- SPECIAL OFFERS
NeoPixel Ring - LED RGB ring 12xWS2812 - Adafruit 1643
The ring consists of 12 individually addressed RGB LEDs 5050 with integrated control unit. Module needs one microcontroller output. Outer circle diameter is 37 mm.Bluefruit LE USB Friend - Bluetooth Low Energy (BLE 4.0) - nRF51822 v1.0 - Adafruit 2267
The board with the BLE Bluetooth module and the USB A plug controlled by the FTDI system. In the operating system, it appears as a virtual serial COM port.- Reduced price
- SPECIAL OFFERS
Ultimate GPS Hat + RTC for Raspberry Pi A+/B+/2/3/4 - Adafruit 2324
Do you want to know where your Raspberry Pi is at any time of the day or night? This shield allows you to read the actual time and position with a frequency of 10 Hz using a...- Sale
- SPECIAL OFFERS
Rubber conductive rubber cable for measuring the tensile force - Adafruit 519
Conductive rubber wire with a diameter of 2 mm and a length of 1 meter. It is used to measure the stretching strength. During the stretching of the element, its resistance...Feather M0 + radio module 433 MHz RFM96 LoRa - compatible with Arduino - Adafruit 3179
A small module with a 32-bit microcontroller ARM Cortex M0 ATSAMD21G18 known from Arduino Zero and the radio module RFM96 433 MHz of long range (LoRa). Feather is designed for...FeatherWing radio module RFM69 433MHz - pad for Feather - Adafruit 3230
The module from the Feather family is equipped with a 433 MHz RFM69 long-range radio module. It allows data transmission at a distance of up to 500 m , using a piece of...Feather Huzzah ESP32 - WiFi module, Bluetooth GPIO - soldered connectors - Adafruit 3591
The wi-fi module and Bluetooth, based on the system ESP32. On board is 8 GPIO ports with support for I2C and SPI, analog input and a connector with a 3.7 V lipol battery. It...ISM330DHCX 6DoF IMU - 3-axis accelerometer and gyroscope - Adafruit 4502
The DoF ISM330DHCX sensor is equipped with a 3-axis accelerometer and a 3-axis gyroscope. It measures linear acceleration within ± 2 / ± 4 / ± 8 / ± 16 g and angular velocity...AHT20 - temperature and humidity sensor I2C - Adafruit 4566
Module with temperature and humidity sensor AHT20 , which communicates via I2C interface. It allows to measure temperature from -40°C to 85°C with an accuracy of 0.3°C...MP34DT01-M - PDM MEMS microphone - Adafruit 3492
MEMS microphone based on PDM (Pulse Density Modulation) signal. It has a built-in MP34DT01-M module and communication is via PDM interface. The signal to noise ratio SNR is...
