Product description: Pro Mini Camera Mount - mount for official camera and Raspberry Pi Zero - PiHut TPH-069
Pro Mini camera mount for a self-contained camera along with a Raspberry Pi Zero. The kit includes only two pieces of laser cut black plexiglass mount and the screws, nuts and spacers needed to mount the mount. The smaller bracket piece is for mounting the camera module and the larger piece is for mounting the Raspberry Pi Zero board. Both pieces have mounting holes as well as a camera hole and a 1/4" tripod mounting hole.
The kit does not include the Raspberry Pi Zero minicomputer, tape, or official camera - these can be purchased separately.
Pro Mini Camera Mount Kit Contents - PiHut TPH-069.
Pro Mini camera mount after mounting the Raspberry Pi Zero.
Components included in the kit
- Laser cut parts and mounts
- Screws, spacers and mounting nuts
How to install the Pro Mini mount
- Peel off the protective film from both sides of the bracket components.
- Attach M2 screws and nuts to the smaller part, then add the camera module to the Raspberry Pi Zero and secure it with more M2 nuts.
- On the larger piece of the bracket, install the longer M2.5 screws along with the spacers.
- Place the Raspberry Pi on the spacers and secure them with the shorter M2.5 screws.
- Connect the 2 chassis pieces together (as shown in the image).
- Connect the Raspberry Pi Zero to the camera module using tape.
Assembly instructions are also available on PiHut manufacturer website.
Mounting the bracket on a tripod
The design of the mount allows you to mount it on a tripod. You will need additional parts for this:
- Tripod
- Nut for mounting the mount
This solution will allow you to monitor 3D prints, rooms, etc.
The assembled holder does not necessarily have to be mounted on a tripod. It may as well stand on a desk or a shelf.
Mounting the holder on the tripod.
