Product description: RF Explorer Pro - RF band analysis and optimization tool with power meter and GPS antenna - Seeedstudio 114993046
RF Explorer Pro is an advanced RF signal analysis and optimization tool from Seeedstudio . It combines a spectrum analyzer, power meter, and signal tracer with an intuitive user interface on a high-resolution touchscreen display . With operating modes such as Zero Span and Waterfall 2D/3D , this device offers unparalleled flexibility in analyzing and monitoring a wide variety of RF signals, from IoT to continuously modulated signals. Its wideband design allows for fast event detection up to 8 GHz , while the advanced power meter and signal tracer enable precise diagnostics and characterization of RF systems. Equipped with analysis-friendly features such as a signal coverage map, WiFi analyzer, and data export capabilities , it is an essential tool for wireless professionals.
RF Explorer Pro - RF band analysis and optimization tool with power meter and GPS antenna - Seeedstudio 114993046. 
RF Explorer Pro is an advanced tool for analyzing and optimizing RF signals.Special features
- Advanced Analysis Features - Allows accurate spectrum scanning from 15 MHz to 7.5 GHz, utilizing a variety of advanced modes such as Zero Span, Waterfall 2D and 3D, providing detailed signal analysis
- Touchscreen display - offers a resolution of 1280 x 800 pixels with a brightness of 250 cd/m2 and a contrast ratio of 800:1
- Power Meter - allows for fast event recognition in the 10 MHz to 8 GHz bands in just 100 microseconds
- Coverage Heat Map - Uses external GPS assistance and manual controls to measure signal strength in the field, creating a heat map showing coverage areas
- Various ports and connectors - equipped with USB 3.0, audio jack, microHDMI port, microSD card slot and Ethernet connector with USB adapter
Application
- Telecommunications and communications
- Wireless network optimization
- IoT
- RF Engineering and Testing
- WiFi network analysis
- Security and radio surveillance
Arrangement of elements on the device
- Power meter output
- SMA Auxiliary Connector
- Signal Tracking Generator SMA Connector
- GPS antenna output
- Volume buttons
- On/off button
- USB Type-C
- HDMI output
- USB 3.0
- Audio Jack
- IPS display
Kit contents
- RF Explorer Pro
- Rubber Duck UHF 400-900 MHz SMA antenna
- Black UHF 900-6000 MHz SMA antenna
- USB Type-C cable
- Handy case
Technical specifications
RF Band Analyzer
- Frequency range: basic, 15 MHz to 3.3 GHz
- Range: 0 (zero span), 500 kHz to 6 GHz (sweep)
- Display: LCD 1280 x 800 px, 16.7M colors, with backlight
- Frequency resolution: 1 kHz
- Resolution Bandwidth (RBW): Automatic from 3 kHz to 600 kHz
- Factory calibration: enabled
Power meter
- Frequency range: 10 MHz to 8 GHz
- Dynamic range:
- Direct: -60 dBm to +10 dBm
- With LNA: -130 dBm to -30 dBm
- With attenuator: -80 dBm to -10 dBm
- Operating modes: continuous, trigger
- Event detection: 100 uS
Signal Tracking Generator
- Frequency range: 24 MHz to 6 GHz
- Output power range: -40 dBm to -30 dBm in 3 dB steps, -10 dBm to 0 dBm in 3 dB steps
- Operating modes: CW, Frequency Sweep, Amplitude Sweep
Additional information
- Battery: Internal, Li-ion 4500 mAh
- Antenna connectors: 2x SMA 50 Ω
- Interfaces: USB 3.0, microHDMI, 3.5 mm audio jack, microSD card slot, Ethernet (with USB Type-C adapter)
- Maximum input power: +33 dBm with internal attenuator
- Average noise level: -110 dBm
- Frequency stability and accuracy: TCXO ±0.5 ppm
- Housing: durable, with aluminum elements
- Weight: 570 g
- Dimensions: 215 x 140 x 25 mm
