- New
- New
- Sale
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
ELECTRONICS - Strona 88
Loading...
DFRobot Matrix LED RGB 32x16 - 512 diodes
The matrix consists of 512 RGB LEDs arranged in 32 rows and 16 columns. For operation of the module, you must use 13 pins of the microcontroller. The matrix can be connected in...
Index: DFR-12264
Index: DFR-12264
DFRobot Shield NB-IoT / LTE / GNSS / GPRS / GPS SIM7070G - Shield for Arduino - DFRobot DFR0572
An Arduino shield that allows you to send text messages and create connections in the GSM network. It also has a GPS and LTE module. It communicates via the UART serial...
Index: DFR-12362
Index: DFR-12362
Cytron LSA08 - strip with reflection sensors and display
Compact strap with eight reflective sensors. It has the function of automatic calibration, LCD display of 2x8, digital and analog outputs, UART, powered with a voltage of 12 V.
Index: CTN-12398
Index: CTN-12398
OTG Host USB cable - microUSB - white - 12cm
Adapter microUSB - USB OTG slot. It is dedicated for tablets, smartphones, etc. that support USB OTG host mode. It lets you connect the devices equipped with a standard USB plug.
Index: DNG-12490
Index: DNG-12490
Power supply for LED Akyga 11-15V / 8.3A / 100W
100 W power supply designed to supply lighting based on LED technology, e.g. tapes, bulbs, panels, RGB controllers and other DC-powered devices from 11 V to 15 V. The voltage...
Index: RCO-12861
Index: RCO-12861
DFRobot Gravity - digital barometer, pressure and altitude sensor 1250hPa I2C/SPI 3,3-5,5V
Module with digital barometer from Bosch BMP388. The measurement range is from 300 hPa to 1250 hPa relative accuracy of 8 Pa on approx. 0.5 m of altitude. The system is...
Index: DFR-13156
Index: DFR-13156
Power cord extension cord IEC 1.8 m VDE - black
Extension of the power cable with the IEC 320 C13 and IEC 320 C14 plugs with the 1.8 m length, used mostly in PC and server computers and power supplies for laptops and other...
Index: IMP-13207
Index: IMP-13207
- Reduced price
- SPECIAL OFFERS
Radio transmitter Feather 32u4 RFM95 LoRa Radio - 868MHz - Adafruit 3078
Radio transmitter/receiver operating in the LoRa standard powered with the rechargeable li-pol battery or via USB, it is running at frequencies of 868/915 MHz. Range, when...
Index: ADA-13280
Index: ADA-13280
- Reduced price
- SPECIAL OFFERS
The control module from a Grove series. It has a built-in tact-switch system and pull-down resistor. It communicates with the microcontroller through a digital signal.
Index: SEE-13344
Index: SEE-13344
OdSeven Camera Module Sony IMX219 8MPx 77,6 degree - for Raspberry Pi
Camera module with sensor IMX219 with a resolution of 8 MPx and angle of 77,6°. The module has no PCB. It works with the official camera v2 for the Raspberry Pi.
Index: ODS-13465
Index: ODS-13465
Grove RGB LED Stick - LED RGB 10 x WS2813 Mini 3535
The panel consists of 10 individually addressed RGB LEDs WS2813 Mini-3535 with built-in control unit. LEDs located on the panel are controlled with just one signal pin.
Index: SEE-13662
Index: SEE-13662
LED 3mm holder - plastic concave - 10pcs
Holder for LEDs 3 mm, made of plastic. The subject of the sale is the holder, the LEDs can be purchased separately. Price for 10 pieces.
Index: AKS-13703
Index: AKS-13703
- Sale
- SPECIAL OFFERS
BleBox ProxiSwitch V2 - proximity switch 12-24V
Complete module allows you to turn the device on and off by touch or by gesture. It works with voltage from 12V to 24V and current efficiency up to 5A. It has...
Index: BOX-13725
Index: BOX-13725
STSPIN220 Low-Voltage Stepper Motor Driver Carrier - Pololu 2876
Stepper motor driver powered from 1,8 V to 10 V. Maximum resolution: 1/256 koku. Can operate without heat sink or forced air flow at 1.1 A per phase.
Index: PLL-13822
Index: PLL-13822
Step-Up Voltage Regulator U3V70F5 - 5V 10A - Pololu 2891
Step-up converter with 5 V output voltage. Maximum current up to 10 A. Supply voltage between 2.9 V and 5 V.
Index: PLL-14003
Index: PLL-14003
ACHS-7123 Current Sensor Carrier -30A to +30A - Pololu 4032
Current sensor operating in the range from -30 to 30 A, based on the Hall effect. Input voltage is from 4.5 V to 5.5 V. The sensor is designed to use in systems of 5 V.
Index: PLL-14234
Index: PLL-14234
Grove - LCD display 2x16 characters with backlight (White on Blue)
Monochrome 2 x 16 character LCD display with high brightness backlight from Grove. The module communicates with the control board via the two-row I2C bus. The screen is powered...
Index: SEE-14736
Index: SEE-14736
Antenna Square GPS 2.4V - 5V SMA - 3m
GPS antenna at 1575.42MHz ± 1.02 MHz. Standard cable length is 3 meters. The antenna has a magnetic base so we can place it on a metal surface, e.g. on a car roof. It is...
Index: PSC-14775
Index: PSC-14775
Cytron Shield-MDD10 - two-channel DC motor driver - 7V-30V/10A - Shield for Arduino
A module that allows you to control two DC motors or one stepper motor using Arduino. The overlay allows you to adjust the direction and speed of motors with current...
Index: CTN-14815
Index: CTN-14815
Monostabile switch PB07C 7x7mm - 5pcs
The monostable switch PB07C has dimensions of 7 x 7 mm. It has 6 leads that can be soldered into the PCB. The voltage of the switch is 30 V. The monostable button is an...
Index: AKS-14950
Index: AKS-14950
Two fans 5V with 50x25mm heat sink
Two fans operating at 5 V. The set has a 2-pin connector with a 2,54 mm grid. A heat sink with thermally conductive tape is mounted to the fans. Dimensions of fans with heat...
Index: LON-15059
Index: LON-15059
ProtoBoard - prototyping board 572-poles - double sided - DFRobot FIT0203
Double-sided prototype plate with dimensions of 78 x 58 mm. It is equipped with 572 fields - 22 x 26, the raster is 2.54 mm, it also has 4 mounting holes of 3 mm diameter. It...
Index: DFR-15089
Index: DFR-15089
RS485 - Ethernet converter - Cortex M0 - Waveshare 16529
Device that allows communication between RS485 and Ethernet RJ45 interface. Module can be configured by web page, AT commands, serial protocol and network protocol. It is...
Index: WSR-15133
Index: WSR-15133
RS232/RS485 converter - Ethernet - Cortex M4 - Waveshare 16530
A device allowing communication between RS232 or RS485 and Ethernet RJ45 interfaces. Module configurable via web page, AT commands, serial protocol and network protocol. It...
Index: WSR-15134
Index: WSR-15134