Magnetic door/window sensor - actuator - 57140-000 Littelfuse
Properly selected mounting connectors not only make it easier to keep internal wiring of devices in order, but also significantly reduce both assembly and service time of individual components. No wonder that such connectors are used in practically all branches of electronics - from everyday devices to medical or industrial equipment. In our offer you will find a wide range of elements with different dimensions, number of contacts and design.
justPi JST PH2.00 2/3/4/5 pin (male+female) and female pin for socket housing - 230 pieces
JustPi JST PH2.00 connector set consisting of 10 sets of plugs and sockets with the number of pins: 2 / 3 / 4 / 5, 230 elements in total. All connectors are placed in a...
Assembly bar female 4-pin, raster 3,5mm
Seperable terminal block, female, 4-pin. Pitch is 3.5 mm. Height is 11.3 mm. Screw on the flat screwdriver (-).
Assembly bar female 2-pin, raster 5,08mm, steel
Seperable terminal block, female, 2-pin. Pitch of 5.08 mm. Height is 15.1 mm. Screw on the flat screwdriver (-).
Assembly bar female 4-pin, raster 5,08mm, steel
Seperable terminal block, female, 4-pin. Pitch of 5.08 mm. Height is 15.1 mm. Screw on the flat screwdriver (-).
Assembly bar female 3-pin, raster 5,08mm, steel
Seperable terminal block, female, 3-pin. Pitch of 5.08 mm. Height is 15.1 mm. Screw on the flat screwdriver (-).
Assembly bar female 2-pin, raster 3,5mm
Seperable terminal block, female, 2-pin. Pitch of 3.5 mm. Height is 11.3 mm. Screw on the flat screwdriver (-).
Assembly bar female 3-pin, raster 3,5mm
Seperable terminal block, female, 3-pin. Pitch of 3.5 mm. Height is 11.3 mm. Screw on the flat screwdriver (-).
Assembly bar male 3-pin, raster 5,08mm, angular closed
Seperable terminal block, male, angular, 3-pin. Pitch of 5,08 mm. Height is 12 mm.
Assembly bar male 4-pin, raster 5,08mm, vertical closed
Seperable terminal block, female, 4-pin. Pitch of 5.08 mm. Height is 12 mm.
Barrier strip for PCBs, 3-pin, 8.5mm raster
Barrier strap for PCB, 3-pin, with a pitch of 8.5 mm, the maximum voltage for the contacts is 300 V and current is 20 A.
Assembly bar male 4-pin, raster 5,08mm, angular closed
Disconnectable terminal block, male, angled, 4-pin. Raster 5,08 mm. Height 12 mm.
Female mounting strip, straight 10-pin, 3,5mm raster
10-pin cable terminal strip equipped with female connectors with a 3.5 mm grid. The direction of plugging in the wires is parallel to the axis of the wires, the wire cage is...
Assembly bar male 3-pin, raster 5,08mm, angular open
Seperable terminal block, male, angular, 3-pin. Pitch is 5.08 mm. Height is 12 mm.
Assembly bar male 10-pin, raster 5,08mm, vertical closed
Seperable terminal block, male, 10-pin. Pitch of 5.08 mm. Height is 12 mm.
Assembly bar male 5-pin, raster 3,5mm, vertical
Seperable terminal block, male, 5-pin. Pitch of 3.5 mm. Height is 9.20 mm.
Assembly bar male 10-pin, raster 5,08mm, angular open
Seperable terminal block, male, angular, 10-pin. Pitch is 5.08 mm. Height is 12 mm.
Assembly bar female 2-pin, raster 5,08mm, brass
Seperable terminal block, male, angular, 2-pin. Pitch of 5.08 mm. Height is 15.1 mm. Screw on the flat screwdriver (-).
Assembly bar male 2-pin, raster 5,08mm, vertical closed
Seperable terminal block, male, 2-pin. Pitch of 5.08 mm. Height is 12 mm.
Assembly bar male 2pin, raster 3,5mm, angular
Seperable terminal block, male, angular, 2-pin. Pitch of 3.5 mm. Height is 9.20 mm.
Assembly bar male 2-pin, raster 5,08mm, angular open
Seperable terminal block, male, angular, 2-pin. Pitch is 5.08 mm. Height is 12 mm.
Assembly bar male 8pin, raster 3,5mm, angular
Disconnectable terminal block, male, angled, 8-pin. Raster 3,5 mm. Height 9,20 mm.
Assembly bar male 8-pin, raster 3,5mm, vertical
Disconnectable terminal block, male, 8-pin . Raster 3.5 mm. Height 9,20 mm.
Assembly bar male 10-pin, raster 5,08mm, angular closed
Disconnectable terminal block, male, angled, 10-pin. Raster 5,08 mm. Height 12 mm.See also
Mounting connectors are perfect for connecting individual modules and subassemblies inside devices and control cabinets. Depending on the version used, they can conduct currents from a few to even several amperes, although there are versions with even higher parameters. Most connectors of this type have also quite high limits of voltage, with which they can work, which allows to use them in power supply circuits (before using the element, always check its technical documentation!). Mounting connectors are available in rasters: 2.54 mm, 3.5 mm, 5.08 mm, and 7.62 mm and 8.5 mm. The first two spacings are perfect for control and measurement circuits, as well as for supplying small modules. Larger connectors, on the other hand, cope well with powering more "current-consuming" circuits, although they can also be used to connect sensors or control signals.
Botland store offers a wide selection of mounting connectors of the most popular spacing of 3.5 mm and 5.08 mm. The former are available in sizes from 2 pins to as much as 8 pins, which allows you to select the appropriate number of lines for a given application, without the need to split one wire harness into several separate connectors. This solution greatly improves the legibility of the installation and allows for logical grouping of wires according to their function. Terminal blocks in 3.5 mm raster have maximum current-carrying capacity from 7 A (according to European IEC standards) to 8 A (according to American UL standards) and can work with voltages up to 250V (according to IEC) or 300V (according to UL). A complete pair of connectors consists of a male part (soldered on PCB) and a female part (equipped with a terminal block), and the wrong polarity is prevented by the shape of both parts, which prevents their reverse assembling. The connectors made in 5.08 mm pitch can carry currents up to 20 A and work with voltages up to 300 V. In our store you will find versions with number of contacts from 2 to 16.
In addition to detachable terminal blocks, we also offer excellent mounting connectors in the form of barrier strips. The name comes from the vertical "partitions", which isolate the adjacent contacts from each other and protect against breakage or accidental short circuits (e.g. by touching the tool or loose cable end). What is very important, this type of connectors can work with voltages up to 300 V and currents up to 20 A, which predisposes them to use in power supply systems - both mains and low voltage, as well as in controllers of motors or other executive elements of considerable power.
