- New
- Sale
- Sale
DFRobot Gravity - analog sensor of TDS, purity of water for Arduino
Index: DFR-10830
- Reduced price
- Sale
- Reduced price
- Sale
List of products by brand Adafruit - Strona 2
Loading...
RFID / NFC MiFare Classic Tag white - 13,56MHz - Adafruit 360
The RFID /NFC identifier in the form of a white marker, is equipped with NXP S50 chip. Each chip has a unique 32-bit code. The devices work at a small distance from the...
Index: ADA-02952
Index: ADA-02952
RTC PCF8523 I2C - real time clock - Adafruit 3295
Module with real time clock and backup battery. It is used in applications written to register data, in clock, alarms, etc. Communication interface is an I2C bus.
Index: ADA-07662
Index: ADA-07662
Module with digital barometer from Bosch BMP388. The measurement range is from 300 hPa to 1250 hPa with 8 Pa accuracy per appr. 0.5m of altitude. The system is powered with the...
Index: ADA-13147
Index: ADA-13147
SPH0645LM4H - MEMS I2S microphone - Adafruit 3421
The module is equipped with a digital microphone with a range from 50 Hz to 15 kHz, and also with the I2S bus. Work voltage in the range of 1.6 V to 3.6 V.
Index: ADA-09715
Index: ADA-09715
MCP4728 DAC I2C converter - 4 channels + EEPROM - Adafruit 4470
Digital-to-analogue converter based on MCP4728 chip. It allows to obtain 4 analog outputs from any microcontroller equipped with I2C interface, e.g. Arduino. The...
Index: ADA-16457
Index: ADA-16457
Lever switch ON-OFF 12V / 20A backlit - yellow - Adafruit 3219
Switch with lever equipped with 2 contacts with load capacity 20 A and 12 V. Leads raster is 24,2 mm, total height 66 mm. The switch has a yellow backlight.
Index: ADA-11413
Index: ADA-11413
ALS-PT19 - analog ambient light sensor - Adafruit 2748
The module is equipped with analog light sensor, powered with a voltage in the range from 2.5 V to 5.5 V. The greater the light intensity, the higher the value of the voltage...
Index: ADA-05298
Index: ADA-05298
Mini Kit DC and stepper motor driver TB6612 - Motor Hat for Raspberry Pi - Adafruit 2348
Shield for Raspberry Pi, version A+, B+ and 2 to control four DC motors (13.5 V/1.2 A) or two stepper motors. It communicates through interface I2, using only two lines of...
Index: ADA-03401
Index: ADA-03401
MCP73831 - Li-Pol/Li-Ion charger single 1S 3,7V USB cell - Adafruit 1304
Charger for 1-purpose lithium-polymer batteries with a nominal voltage of 3.7 V and lithium-ion. The circuit is powered by a USB plug, which can be plugged directly into a...
Index: ADA-03298
Index: ADA-03298
TB6612 - two-channel 13.5V / 1.2A motor driver with connectors - Adafruit 2448
Dual-channel driver motors on the basis of the layout of the TB6612FNG . The voltage of the motors is d 4.5 V to 13.5 V and logic voltage ranges from 2.7 V to 5 V . The...
Index: ADA-15916
Index: ADA-15916
Lever switch ON-OFF 12V / 20A backlit - blue - Adafruit 3306
The switch with the lever equipped with 2 contacts with load capacity of 20 A and 12 V. Pins pitch is 24.2 mm, total height is 66 mm. The switch has a blue backlight.
Index: ADA-11416
Index: ADA-11416
NeoPixel Mini PCB - RGB LEDs WS2812 5050 - 5pcs - Adafruit 1612
Modules with individually addressed RGB LED WS2812 24-bit with built-in control unit and with holes. The module needs one microcontroller output. Board sizes: 10 x 8 mm.
Index: ADA-02947
Index: ADA-02947
APDS9960 Proximity, Light, Color and Gesture Sensor - STEMMA QT/Qwiic - Adafruit 3595
The sensor, which can detect simple gestures, light of the surroundings, color and approaching obstacles. The device communicates with a microcontroller via the I2C bus. It...
Index: ADA-09815
Index: ADA-09815
FeatherWing OLED display 128x64px - pad for Feather - STEMMA QT/Qwiic - Adafruit 4650
Feather overlay with a monochrome OLED display with 128 x 32 px resolution. The screen diagonal is 1.3" and the high contrast of the display makes the presented data...
Index: ADA-17699
Index: ADA-17699
TCA9548A - module with multiplexer I2C - Adafruit 2717
Module with a multiplexer TCA9548A allows you to connect 8 different digital I2C interface to one interface. Working voltage from 3 V to 5 V, the address of the output I2C bus...
Index: ADA-04915
Index: ADA-04915
SPW2430 - module with MEMS microphone - Adafruit 2716
Module with silicon microphone, MEMS type, which does not require amplifier. It detects sound with frequency from 100 Hz to 10 kHz and converts it into an analog output signal...
Index: ADA-04968
Index: ADA-04968
ADT7410 - High Accuracy I2C Temperature Sensor Breakout Board - Adafruit 4089
Adafruit temperature sensor with high accuracy with digital thermometer ADT7410 in the range of -40°C to +105°C equipped with interface I 2 C (TWI). The supply voltage ranges...
Index: ADA-13951
Index: ADA-13951
Capacitive touch screen TFT 2,8" 240x320px with microSD reader - Shield for Arduino - Adafruit 1947
Overlay for Arduino with capacitive TFT touch screen. Its diagonal is 2.8" , resolution is 240 x 320 px . The display has LED backlighting and individual pixel control,...
Index: ADA-17671
Index: ADA-17671
ADXL343 QT 3-axis I2C / SPI digital accelerator - module - Adafruit 4097
Sensor for measuring acceleration in three axes in the range of +-2g/4g/8g/16g. The module is supplied with the voltage from 2 V to 3.6 V, the voltage regulator is...
Index: ADA-13948
Index: ADA-13948
Boost - Step-Up Voltage Regulator - DC 5,5/2,1mm plug - 5-12V 0,7A - Adafruit 2778
Cable with integrated converter step-up boost which provides output voltage of 12 Volts from a 5V supply received from the USB port. The output connector is a DC connector 5,5...
Index: ADA-05292
Index: ADA-05292
LIS3DH 3-axis I2C/SPI digital accelerometer - STEMMA QT - Adafruit 2809
Sensor for measuring acceleration in three axes in the range: ± 2g, ±4 g, ±8 g / ±16 g. Powered with the voltage from 3 V to 5 V. It communicates over the I2C or SPI bus.
Index: ADA-05295
Index: ADA-05295
CSI / DSI Extender Thingy for Raspberry Pi camera/display tapes - Adafruit 3671
The board is a great tool that allows you to extend the tape 15-pin pitch of 1 mm CSI for camera or DSI display Raspberry Pi.
Index: ADA-10318
Index: ADA-10318
Module with USB type C socket - connector for breakout board - Adafruit 4090
The module allows for data transfer, connection to the breakout board with configuration pins, security and power supply with connector USB type C. Module is suitable for a...
Index: ADA-13949
Index: ADA-13949
Trinket M0 Microcontroller - CircuitPython and Arduino IDE - Adafruit 3500
Module with Atmel ATSAMD21 microcontroller equipped with 256 kb of Flash memory, 5 digital pins, analog inputs and 2 PWM channels. On board is a microUSB connector, through...
Index: ADA-10873
Index: ADA-10873