- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
List of products by brand Adafruit - Strona 3
Loading...
ALS-PT19 - analog ambient light sensor - Adafruit 2748
The module is equipped with analog light sensor, powered with a voltage in the range from 2.5 V to 5.5 V. The greater the light intensity, the higher the value of the voltage...
Index: ADA-05298
Index: ADA-05298
ATSAMD09 Seesaw I2C - extension for Arduino and Raspberry Pi - Adafruit 3657
Seesaw ATSAMD09 is a universal framework transducer which expands the number of pins for microcontrollers or microcomputers with I2C interface. It extends the board with...
Index: ADA-10319
Index: ADA-10319
- Sale
- SPECIAL OFFERS
Light intensity sensor BH1750 - STEMMA QT/Qwiic - Adafruit 4681
Light intensity sensor with BH1750 chip manufactured by Adafruit. 16-bit , efficient and with low power consumption. Can be used to work in different lighting conditions....
Index: ADA-17725
Index: ADA-17725
Mini Kit DC and stepper motor driver TB6612 - Motor Hat for Raspberry Pi - Adafruit 2348
Shield for Raspberry Pi, version A+, B+ and 2 to control four DC motors (13.5 V/1.2 A) or two stepper motors. It communicates through interface I2, using only two lines of...
Index: ADA-03401
Index: ADA-03401
MCP73831 - Li-Pol/Li-Ion charger single 1S 3,7V USB cell - Adafruit 1304
Charger for 1-purpose lithium-polymer batteries with a nominal voltage of 3.7 V and lithium-ion. The circuit is powered by a USB plug, which can be plugged directly into a...
Index: ADA-03298
Index: ADA-03298
Power Shield Li-Ion/Li-Pol for Pro Trinket backpack - Adafruit 2124
Shield in the form of a converter which supplies power to the modules of Pro Trinket via rechargeable li-on battery and li-pol 1S with nominal voltage of 3.7 V.
Index: ADA-03080
Index: ADA-03080
- Sale
- SPECIAL OFFERS
TXB0108 - two-way, 8-channel logic converter - Adafruit 395
The module is based on a TXB0108 system, it allows you to exchange data between systems that use the most popular voltage levels: 3.3 V and 5V. It has eight channels, it...
Index: ADA-02468
Index: ADA-02468
Step-Up Votage Regulator TPS61023 - Adafruit 4654
Boost type step-up converter with 5 V output voltage and 1 A current capacity. The input voltage should be between 0.5 V and 5.5 V . The minimum input voltage for start-up...
Index: ADA-17202
Index: ADA-17202
Lever switch ON-OFF 12V / 20A backlit - blue - Adafruit 3306
The switch with the lever equipped with 2 contacts with load capacity of 20 A and 12 V. Pins pitch is 24.2 mm, total height is 66 mm. The switch has a blue backlight.
Index: ADA-11416
Index: ADA-11416
Feather Huzzah ESP32 - WiFi module, Bluetooth GPIO - Adafruit 3405
The wi-fi module and Bluetooth, based on the system ESP32. On board is 8 GPIO ports with support for I2C and SPI, analog input and a connector with a 3.7 V lipol battery. It...
Index: ADA-10313
Index: ADA-10313
APDS9960 Proximity, Light, Color and Gesture Sensor - STEMMA QT/Qwiic - Adafruit 3595
The sensor, which can detect simple gestures, light of the surroundings, color and approaching obstacles. The device communicates with a microcontroller via the I2C bus. It...
Index: ADA-09815
Index: ADA-09815
- Reduced price
- SPECIAL OFFERS
NeoPixel Mini PCB - RGB LEDs WS2812 5050 - 5pcs - Adafruit 1612
Modules with individually addressed RGB LED WS2812 24-bit with built-in control unit and with holes. The module needs one microcontroller output. Board sizes: 10 x 8 mm.
Index: ADA-02947
Index: ADA-02947
Pro Trinket - ATmega328 module - 5V 16MHz - Adafruit 2000
Module with AVR ATmega328 microcontroller is equipped with 28 KB of Flash memory, 18 digital pins, analog inputs and 8 PWM channels. On board is a microUSB connector, thanks to...
Index: ADA-03005
Index: ADA-03005
ICM-20948 9DoF - 3-axis accelerometer, gyroscope and magnetometer I2C/SPI Qwiic - Adafruit 4554
The Adafruit module is a combination of 3-axis gyroscope, accelerometer and compass. It allows to measure acceleration, magnetic field and angular velocity. The measuring...
Index: ADA-17709
Index: ADA-17709
FeatherWing OLED display 128x64px - pad for Feather - STEMMA QT/Qwiic - Adafruit 4650
Feather overlay with a monochrome OLED display with 128 x 32 px resolution. The screen diagonal is 1.3" and the high contrast of the display makes the presented data...
Index: ADA-17699
Index: ADA-17699
TCA9548A - module with multiplexer I2C - Adafruit 2717
Module with a multiplexer TCA9548A allows you to connect 8 different digital I2C interface to one interface. Working voltage from 3 V to 5 V, the address of the output I2C bus...
Index: ADA-04915
Index: ADA-04915
LC709203F - LiPoly / LiIon Fuel Gauge and Battery Monitor - STEMMA QT / Qwiic - Adafruit 4712
Battery level indicator from Adafruit. It allows to measure the voltage of Li-Pol and Li-Ion batteries. Displays the voltage value and percentage charge of the cell. The...
Index: ADA-18235
Index: ADA-18235
MAX31856 Breakout - Universal Thermocouple Amplifier - Adafruit 3263
Module with thermocouple amplifier MAX31856 communicating via the 4-pin SPI interface. Works with thermocouples of type K, J, N, R, S, T, E and B. Works with a supply voltage...
Index: ADA-07682
Index: ADA-07682
TPL5111 Low Power Timer Breakout - Adafruit 3573
Module that allows to reduce the energy consumption of any project because of its cyclic setting of the sEnable pin's status. It works with delays from the "every 100 ms" to...
Index: ADA-09817
Index: ADA-09817
- Sale
- SPECIAL OFFERS
Capacitive touch screen TFT 2,8" 240x320px with microSD reader - Shield for Arduino - Adafruit 1947
Overlay for Arduino with capacitive TFT touch screen. Its diagonal is 2.8" , resolution is 240 x 320 px . The display has LED backlighting and individual pixel control,...
Index: ADA-17671
Index: ADA-17671
Boost - Step-Up Voltage Regulator - DC 5,5/2,1mm plug - 5-12V 0,7A - Adafruit 2778
Cable with integrated converter step-up boost which provides output voltage of 12 Volts from a 5V supply received from the USB port. The output connector is a DC connector 5,5...
Index: ADA-05292
Index: ADA-05292
ADXL343 QT 3-axis I2C / SPI digital accelerator - module - Adafruit 4097
Sensor for measuring acceleration in three axes in the range of +-2g/4g/8g/16g. The module is supplied with the voltage from 2 V to 3.6 V, the voltage regulator is...
Index: ADA-13948
Index: ADA-13948
- Reduced price
- SPECIAL OFFERS
STEMMA - Soil Moisture Sensor - Adafuit 4026
The soil moisture sensor and temperature sensor from Adafruit. Its design allows you for the capacitive measurement using a single probe. It has not the bare metal, so it is...
Index: ADA-14431
Index: ADA-14431
Feather M0 datadalogger with microSD card reader - compatible with Arduino - Adafruit 2796
A small module with a microcontroller ATSAMD21G18 ARM Cortex M0 known from Arduino M0. Feather is designed for portable projects. On board is a connector microUSB, through...
Index: ADA-06568
Index: ADA-06568